KeTeR 17199514 Manor Pent Shed User Manual

June 5, 2024
Keter

KeTeR logo

MANOR PENT 6×4KeTeR 17199514 Manor Pent Shed

| US:
Tel: 1-(888)-374-4262, Fax: 317-575-4502
Canada: Tel: 1-(800)-661-6721
UK:
Tel: 0121-5060008, Fax: 0121-4220808
Spain:
Tlf: +34.949 27 74 21, Fax: +34.949 34 89 76
Other European Countries:
Tel: 31-1612-28301, Fax: 31-1612-2832|
WWW.KETER.COM|
http://www.keter.com/459574?from=qr-code
---|---|---|---

WARRANTY ACTIVATION

Thank you for your purchase of the Keter shed. In order to activate your warranty, please log onto our website and fill in the form under warranty activation

SITE PREPARATION

Level the ground surface

KeTeR 17199514 Manor Pent Shed - Fig4

Recommendation : Construct a wooden or concrete base as a foundation

KeTeR 17199514 Manor Pent Shed - Fig5| KeTeR
17199514 Manor Pent Shed - Fig6
---|---

External floor measurements areKeTeR 17199514 Manor Pent Shed -
Fig7

BEFORE STARTING ASSEMBLY

Read the care and safety guidelines at the end of this manual | Review all assembly instructions | Assemble all the parts according to the directions in this manual. Do not skip any steps.

REQUIRED TOOLS

KeTeR 17199514 Manor Pent Shed - REQUIRED TOOLS SPATULA

• Use a spatula (part “SPA”) for easier insertion of the panel into the profile.

KeTeR 17199514 Manor Pent Shed - Fig8ASSEMBLY REQUIRES TWO PEOPLE

SHED PART

Code letters are imprinted on each part for easy identification

ROOF PARTS

KeTeR 17199514 Manor Pent Shed - Fig13

FLOOR PARTS

KeTeR 17199514 Manor Pent Shed - Fig12

WINDOW PARTS

KeTeR 17199514 Manor Pent Shed - Fig11

WALL PARTS

DOOR PARTS

SCREWS

SELF-DRILLING SCREKeTeR 17199514 Manor Pent Shed -
Fig15 • Use a powerful electric screwdriver. The screw should drill itself to a metal profile

Packaging may contain some additional small parts for use as a spare parts

NOTE: Due to variations in production, the actual assembled size may vary slightly from the specified dimensions

FLOOR ASSEMBLY

| KeTeR 17199514 Manor Pent Shed - Fig17
---|---
• Turn over the floor pane

KeTeR 17199514 Manor Pent Shed - Fig18

| • Turn over the floor pane

KeTeR 17199514 Manor Pent Shed - Fig19

---|---

KeTeR 17199514 Manor Pent Shed - Fig20

WALL ASSEMBLY

| KeTeR 17199514 Manor Pent Shed - Fig22
---|---
• Use spatula (part “SPA”) for easier insertion of the panel into profile
|
---|---
KeTeR 17199514 Manor Pent Shed - Fig25|
---|---
|
KeTeR 17199514 Manor Pent Shed - Fig29| KeTeR
17199514 Manor Pent Shed - Fig31
---|---
| KeTeR 17199514 Manor Pent Shed - Fig32

ROOF ASSEMBLY

| KeTeR 17199514 Manor Pent Shed - Fig35
---|---
|
KeTeR 17199514 Manor Pent Shed - Fig37| KeTeR
17199514 Manor Pent Shed - Fig39
---|---
| KeTeR 17199514 Manor Pent Shed - Fig40
KeTeR 17199514 Manor Pent Shed - Fig41| KeTeR
17199514 Manor Pent Shed - Fig43
---|---
KeTeR 17199514 Manor Pent Shed - Fig42| KeTeR
17199514 Manor Pent Shed - Fig44

DOOR ASSEMBLY

KeTeR 17199514 Manor Pent Shed - Fig45|
---|---
KeTeR 17199514 Manor Pent Shed - Fig46| KeTeR
17199514 Manor Pent Shed - Fig48
| KeTeR 17199514 Manor Pent Shed - Fig51
---|---
KeTeR 17199514 Manor Pent Shed - Fig50| KeTeR
17199514 Manor Pent Shed - Fig52

WINDOW ASSEMBLY

KeTeR 17199514 Manor Pent Shed - Fig53| KeTeR
17199514 Manor Pent Shed - Fig55
---|---

OPTION

SECURING THE SHED TO A FOUNDATION
Affix the shed to the foundation by drilling holes in the shed floor at the pre- marked locations and screwing it into the foundation using appropriate screws (screws not included).

KeTeR 17199514 Manor Pent Shed - Fig56

CARE AND SAFETY GUIDELINES

  • The shed is intended for storage purposes only. It is not designed for habitation.
  • It is strongly recommended to secure the shed to an immovable object or anchor it to the ground by drilling holes in the shed floor (at the pre-marked locations) and inserting proper screws into the ground (screws are not included).
  • Do not attempt assembly on windy or cold days.
  • Periodically check the shed to ensure that it is stable and that the site is level.
  • Be careful when handling parts with steel edges.
  • When assembling or handling the shed, use only those tools listed in the user manual.
  • Always wear work gloves, safety goggles, and long sleeves when assembling or performing any maintenance on your shed.
  • Avoid using a lawnmower or mechanical scythe near the shed.
  • Wear safety goggles and always follow the manufacturer’s instructions when using power tools.
  • Wash the shed with a garden hose or a mild detergent solution. Do not use a stiff brush or abrasive cleaners, including degreasers and oil- or acetone-based cleaning materials, as these may stain or damage the shed.
  • Do not store hot items, such as recently used grills and blowtorches, and volatile chemicals in the shed.
  • Avoid placing heavy items against the walls, as this may cause distortion.
  • Keep the roof clear of accumulated snow and leaves. Large amounts of snow on the roof can damage the shed, making it unsafe to enter.
  • Wind direction is an important factor to consider when determining the location of the shed. Reduce exposure to the wind, in general, and of the door side in particular. Keep doors closed and locked when the shed is not in use to prevent wind damage.
  • Do not stand on the roof.
  • Consult your local authorities to check if permits are required to erect the shed.

10-YEAR LIMITED WARRANTY
Your Keter shed (“the Product”) was manufactured from high-quality, recyclable materials under rigorous control and supervision.
Should a problem occur with the Product, please address your claim to Keter customer service on our website (www.keter.com) or by phone.
This warranty covers product failure resulting from defects in manufacturing or materials for a period of 10 years from the date of original retail purchase. (The term “defects” is defined as imperfections that impair the use of the Product).
This warranty does not cover defects resulting from normal wear and tear, including, but not limited to, scuffing, scratches or fractures caused during use, discoloration or fading, rusting, unreasonable use, abuse, negligence, alterations, painting, moving, transporting or relocating the Product, “acts of Nature”, including, but not limited to, hail, any type of storm, flood and fire, and consequential or incidental damages.
Assembly and handling not in accordance with the recommendations, guidelines, and restrictions as described in the Product’s user manual, and used for commercial or public applications will void this warranty.
Keter is not responsible for any damage incurred by third parties or damage to or loss of objects inside or near the shed.
Upon submitting proof of purchase and evidence of the claimed product failure, and subject to reporting the failure in a timely manner, Keter, at its sole discretion, will replace defective parts of the Product, or refund you a prorated portion of the purchase price on a straight line depreciated basis for the length of the warranty.

    For assistance with assembly, or to request replacement parts, log onto our website or call Customer Service.
DO NOT RETURN THE PRODUCT TO THE STORE.

US:
6435 South Scatterfield Road,
Anderson, Indiana 46013, USA
Tel: 1-(888)-374-4262
Fax: 317-575-4502
Canada: Tel: 1-(800)-661-6721| UK:
Unit 4, Woodgate Business Park,
Clapgate Lane, Birmingham,
B32 – 3DB, United Kingdom
Tel: 0121-5060008
Fax: 0121-4220808| Spain:
Avenida Conde de Romanones 6-b.
Polg. Ind. Miralcampo, 19200 Azuqueca
de Henares – Guadalajara, Spain
Tlf. +34.949 27 74 21
Fax +34.949 34 89 76| Other European Countries:
Ericssonstraat 17, Postbus 224,
5120 AE Rijen, the Netherlands
Tel: 31-1612-28301,
Fax: 31-1612-28322
---|---|---|---

WWW.KETER.COM

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Keter User Manuals

Related Manuals