KeTeR 5006867 Patio Store User Manual

: June 1, 2024
: Keter

Table of Contents

KeTeR 5006867 Patio Store
REQUIRED TOOLS
SHED PARTS
WALL ASSEMBLY
KETER DUOTECH™ SHEDS – UNIQUE PAINTABLE WALLS
CARE AND SAFETY GUIDELINES
WARRANTY
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KeTeR 5006867 Patio Store

KeTeR-5006867-Patio-Store-PRODUCT

IMPORTANT

RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
For outdoor use only.

US, Canada

Tel: +1877-638-7056, NACS@keter.com Mon – Fri | 8am – 6pm ET / Lundi-Vendredi 8h -18hSat – Sun | 9am – 6pm ET / Samedi-Dimanche 9h-18h

UK

Tel: +44-121-506-0008, CSUK@keter.com Mon – Fri | 8:30am – 5pm
www.keter.com

LEVEL THE GROUND SURFACE

KeTeR-5006867-Patio-Store-FIG-2

REQUIRED TOOLS

KeTeR-5006867-Patio-Store-FIG-3

BEFORE STARTING ASSEMBLY

Read the care and safety guidelines at the end of this manual
Check to ensure that there are no missing or damaged parts BEFORE starting or arranging assembly
Remove all parts from the package(s) and spread them out on a clean work surface
Review all assembly instructions
Assemble all the parts according to the directions in this manual. Do not skip any steps.

SHED PARTS

KeTeR-5006867-Patio-Store-FIG-4 KeTeR-5006867
-Patio-Store-FIG-5

SCREWS

KeTeR-5006867-Patio-Store-FIG-6

Packaging may contain some additional small parts for use as spare parts.

NOTE: Due to variations in production, the actual assembled size may vary slightly from the specified dimensions.

ASSEMBLY REQUIRES TWO PEOPLE

WALL ASSEMBLY

KeTeR-5006867-Patio-Store-FIG-8 KeTeR-5006867
-Patio-Store-FIG-9

ROOF ASSEMBLY

KeTeR-5006867-Patio-Store-FIG-13 KeTeR-5006867
-Patio-Store-FIG-14

DOOR ASSEMBLY

KeTeR-5006867-Patio-Store-FIG-16 KeTeR-5006867
-Patio-Store-FIG-17

OPTION

KeTeR-5006867-Patio-Store-FIG-24

If you find that the shed is not level, use shims on either side of the shed or door

KeTeR-5006867-Patio-Store-FIG-25 KeTeR-5006867
-Patio-Store-FIG-26

KETER DUOTECH™ SHEDS – UNIQUE PAINTABLE WALLS

This maintenance-free shed is made of a unique compound that enables the brushed wall panels to be painted.
The shed can be used in its original colour, or the walls can be painted to match your landscape, deck, patio, or outdoor setting.
Prior to painting, refer to the detailed care and maintenance instructions:
Type of paint: The walls of the shed can be painted with water-based acrylic paint for exterior use. Recommended: Solid, light shades, satin or semi-gloss finish.
Consult with your colour consultant or paint professional when choosing paint.
Application: Use a roller to apply the paint on the wall dry surface. Do not paint the beam-like crevices in the walls.
Do not paint windows, doors or door beams, roof, floors, or any other part of sheds. Keep in mind:
Painting requires maintenance. After some time, repainting may be required.
For your safety – make sure you follow the paint’s care & safety guide before application.

CARE AND SAFETY GUIDELINES

The shed is intended for storage purposes only. It is not designed for habitation.
It is strongly recommended to secure the shed to an immovable object or anchor to the ground by drilling holes in the shed floor (at the pre-marked locations) and inserting proper screws into the ground (screws are not included).
Do not attempt assembly on windy or cold days.
Periodically check the shed to ensure that it is stable and that the site is level.
Be careful when handling parts with steel edges.
When assembling or handling the shed, use only those tools listed in the user manual.
Avoid using a lawnmower or mechanical scythe near the shed.
Wear safety goggles and always follow the manufacturer’s instructions when using power tools.
Wash the shed with a garden hose or a mild detergent solution. Do not use a stiff brush or abrasive cleaners, including degreasers and oil- or acetone-based cleaning materials, as these may stain or damage the shed.
Do not store hot items, such as recently used grills and blowtorches, and volatile chemicals in the shed.
Avoid placing heavy items against the walls, as this may cause distortion.
Keep the roof clear of accumulated snow and leaves. Large amounts of snow on the roof can damage the shed, making it unsafe to enter.
Wind direction is an important factor to consider when determining the location of the shed. Reduce exposure to the wind, in general, and of the door side in particular. Keep doors closed and locked when the shed is not in use to prevent wind damage.
Do not stand on the roof.
Consult your local authorities to check if permits are required to erect the shed.

WARRANTY

LIMITED LIFETIME WARRANTY

Your Keter shed (“the Product”) was manufactured from high-quality, recyclable materials under rigorous control and supervision.
Should a problem occur with the Product, please address your claim to Keter customer service on our website (www.keter.com) or by phone.
This warranty covers product failure resulting from defects in manufacturing or materials for an unlimited period from the date of the original retail purchase.
(The term “defects” is defined as imperfections that impair the use of the Product).
In such case, the consumer shall let Keter or anyone on its behalf inspect and/or test the alleged defective product at Keter laboratory or in any other place at Keter’s sole discretion.
This warranty does not cover defects resulting from normal wear and tear, including, but not limited to, scuffing, scratches or fractures caused during use, discolouration or fading, rusting, unreasonable use, abuse, negligence, alterations, painting, moving, transporting or relocating the Product, “acts of Nature,” including, but not limited to, hail, any type of storm, flood and fire, and consequential or incidental damages.
Assembly and handling not under the recommendations, guidelines and restrictions as described in the Product’s user manual, and usage for commercial or public applications, will void this warranty.
Keter is not responsible for any damage incurred by consumers and/or third parties or damage to or loss of objects inside or near the shed.
Upon submitting proof of purchase and evidence of the claimed product failure, and subject to reporting the failure on time, Keter, at its sole discretion, will replace defective parts of the Product, or refund you a prorated portion of the purchase price on a straight line depreciated basis, the value will depreciate 10% each year and remain at 10% for the length of the warranty.

IF THERE ARE MISSING OR BROKEN PARTS, PLEASE DO NOT RETURN THE PRODUCT TO THE STORE. Please log onto our website, or contact Customer Service at: WWW.KETER.COM.