KeTeR 5018164 Store-It-Out Max Installation Guide
- June 1, 2024
- Keter
Table of Contents
KeTeR 5018164 Store-It-Out Max Installation Guide
Product Information
Specifications
- Capacity: 240L (63 Gallons)
- Dimensions: 136.5 cm (53.8 inches) x 30 cm (11.8 inches)
- Weight Capacity: Max. 20kg (45lb) per shelf
Product Usage Instructions
Assembly
- Identify and lay out all components as per the manual.
- Follow the step-by-step assembly guide provided in the user manual.
- Use the provided tools for assembly and ensure all parts are securely connected.
Care and Safety Guidelines
It is important to adhere to the following guidelines:
- Regularly clean the product with a mild detergent and water.
- Avoid placing heavy items exceeding the weight capacity on the shelves.
- Ensure the product is placed on a flat, stable surface to prevent tipping.
Warranty Activation
To activate your warranty:
- Visit the Keter website at keter.com/en/warrant-activation.
- Fill in the form under warranty activation with the required information.
- Submit the form to complete the warranty activation process.
FAQ (Frequently Asked Questions)
What should I do if there are missing or broken parts?
If you encounter missing or broken parts, do not return the product to the store. Instead:
- Visit www.keter.com or contact customer service using the provided contact details based on your country/region.
US, Canada: (EN/FR)
keter.com/en-us/contact-us.html
Tel: +1-888-374-4262
Email: [email protected]
UK
Tel: +44-121-506-0008, [email protected]
Mon – Fri | 8am – 4pm
For other European countries see the last page
WARRANTY ACTIVATION
Thank you for your purchase of the Keter shed.
In order to activate your warranty, please log onto our website and fill in
the form under warranty activation.
keter.com/en/warrant-activation
LEVEL THE GROUND SURFACE
REQUIRED TOOLS
BEFORE STARTING ASSEMBLY
Read the care and safety guidelines at the end of this manual | Check to ensure that there are no missing or damaged parts BEFORE starting or arranging assembly | Remove all parts from the package(s) and spread them out on a clean work surface | Review all assembly instructions | Assemble all the parts according to the directions in this manual. Do not skip any steps.
SHED PARTS
NOTE: Due to variations in production, the actual assembled size may vary slightly from the specified dimensions.
ASSEMBLY REQUIRES TWO PEOPLE
REMOVE METAL BAR
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
STEP 10
STEP 11
STEP 12
STEP 13
STEP 14
STEP 15
STEP 16
STEP 17
STEP 18
STEP 19
OPTION
Shelves
It is optional to purchase a wooden plank and use it as a shelf.
CARE AND SAFETY GUIDELINES
- The shed is intended for storage purposes only. It is not designed for habitation.
- It is strongly recommended to secure the shed to an immovable object or anchor to the ground by drilling holes in the shed floor (at the pre-marked locations) and inserting proper screws into the ground (screws are not included).
- Do not attempt assembly on windy or cold days.
- Periodically check the shed to ensure that it is stable and that the site is level.
- Be careful when handling parts with steel edges.
- When assembling or handling the shed, use only those tools listed in the user manual.
- Avoid using a lawnmower or mechanical scythe near the shed.
- Wear safety goggles and always follow the manufacturer’s instructions when using power tools.
- Wash the shed with a garden hose or a mild detergent solution. Do not use a stiff brush or abrasive cleaners, including degrea sers and oil- or acetone-based cleaning materials, as these may stain or damage the shed.
- Do not store hot items, such as recently used grills and blowtorches, and volatile chemicals in the shed.
- Avoid placing heavy items against the walls, as this may cause distortion.
- Keep the roof clear of accumulated snow and leaves. Large amounts of snow on the roof can damage the shed, making it unsafe to enter.
- Wind direction is an important factor to consider when determining the location of the shed. Reduce exposure to the wind, in general, and of the door side in particular. Keep doors closed and locked when the shed is not in use to prevent wind damage.
- Do not stand on the roof.
- Consult your local authorities to check if permits are required to erect the shed.
2-YEAR LIMITED WARRANTY
Your Keter shed (“the Product”) was manufactured from high-quality, recyclable
materials under rigorous control and supervision .
Should a problem occur with the Product, please address your claim to Keter
customer service on our website (www.keter.com) or by
phone.
This warranty covers product failure resulting from defects in manufacturing
or materials for a period of 2 years from the date of original retail
purchase. (The term “defects” is defined as imperfections that impair the use
of the Product).
This warranty does not cover defects resulting from normal wear and tear,
including, but not limited to, scung, scratches or fractures caused during
use, discoloration or fading, rusting, unreasonable use, abuse, negligence,
alterations, painting, moving, transporting or relocating the Product, “acts
of Nature,” including, but not limited to, hail, any type of storm, flood and
fire, and consequential or incidental damages.
Assembly and handling not in accordance with the recommendations, guidelines
and restrictions as described in the Product’s user manual, and usage for
commercial or public applications, will void this warranty.
Keter is not responsible for any damage incurred by third parties or damage to or loss of objects inside or near the shed.
Upon submitting proof of purchase and evidence of the claimed product failure, and subject to reporting the failure in a timely manner, Keter, at its sole discretion, will replace defective parts of the Product, or refund you a prorated portion of the purchase price on a straight line depreciated basis for the length of the warranty.
IF THERE ARE MISSING OR BROKEN PARTS, PLEASE DO NOT RETURN THE PRODUCT TO THE
STORE.
PLEASE ACCESS OUR WEBSITE WWW.KETER.COM, OR CONTACT
CUSTOMER SERVICE AT YOUR COUNTRY/REGION:
US/Canada: (EN/FR)
keter.com/en-us/contact-us.html
Tel: +1-888-374-4262
Email: [email protected]
UK: (EN)
Tel: +44-121-506-0008
Email: [email protected]
Keter UK Ltd
16 Great Queen Street, Covent
Garden, London, WC2B 5AH
Mon – Fri | 8am – 4pm
Designed to Last
Recyclability & Recycling
Community
Responsible Manufacturing
Made in Israel by