Havit Lighting HV9105-1009-5C 4 in 1 RF+WiFi LED Controller Installation Guide
- June 5, 2024
- Havit Lighting
Table of Contents
Havit Lighting HV9105-1009-5C 4 in 1 RF+WiFi LED
Important: Read All Instructions Prior to Installation
Function introduction
Product Data
No.| Input Voltage| Output Current| Output Power|
Remarks| Size(LxWxH)
---|---|---|---|---|---
1| 12-24VDC| 5x4A| 5x(48-96)W| Constant voltage| 145×46.5x16mm
- RF+WiFi LED controller
- 5 channels 12/24V constant voltage output
- Max. 4Aoutput per channel
- RF frequency: 434/869.6/916.5MHz
- Compatible with universal legacy RF remotes
- Waterproof grade: IP20
Safety & Warnings
- DO NOT install with power applied to device.
- DO NOT expose the device to moisture.
Operation
- Do wiring according to wiring diagram.
- P air the WiFi LED controller to the smart phone or tablet:
Step 1: Download the “TuyaSmart”APP from APP store or google play, and register an account as instructed, then log in the account. Please enable bluetooth on your smart phone in advanceDownload the “TuyaSmart”APP from APP store or google play, and register an account as instructed, then log in the account. Please enable bluetooth on your smart phone in advance
Step 2: Short press the “PROG” Button 5 times continuously (or turn off power of the controller 5 times) to reset the WIFI LED Controller to set it into PAIRING Mode, LED Light will blink rapidly, Then tap “Add Device” to pair the controller to WiF i LED controlle
Wiring Diagram
- RGB+CCT Mode
Note: please make sure the dip switches are at position for RGB+CCT mode as shown in above diagra
- RGBW Mode
Note: please make sure the dial switches are at position for CCT mode as shown in above diagram.
- CCT Mode
Note: please make sure the dial switches are at position for CCT mode as shown in above diagram.
- DIM Mod e
Note: please make sure the dip switches are at position for DIM mode as shown in above diagram .