Gude BS 76-900 E Belt Sander Instruction Manual
- June 5, 2024
- Gude
Table of Contents
Gude BS 76-900 E Belt Sander
DELIVERY RANGE
Starting-up the machine
Dust extractor
Operation
Technical Data
WARNING:
- The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.
- The vibration emission level may be used to compare one tool with another.
- It may be used for a preliminary assessment of exposure.
- An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
- Identify additional safety measures to protect the operator from the effects of vibration such as: maintaining the tool and the accessories, keeping the hands warm, organization of work patterns.
Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. The operator is responsible for accidents or risks to third parties. Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education. In case of any doubts about connection and operation refer please to our customer center
Specified Conditions Of Use
The belt sander can be used for sanding wood, plastics and metal.
Do not use this product in any other way as stated for normal use. Not
observing general regulations in force and instructions from this manual does
not make the manufacturer liable for damages.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury type(s)
WARNING
- Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
- Save all warnings and instructions for future reference.
Belt Sander safety warnings
- Hold power tool by insulated gripping surfaces, because the belt may contact its own cord. Cutting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
- Wear ear protectors. Exposure to noise can cause hearing loss.
- Use protective equipment. Always wear safety glasses when working with the machine. The use of protective clothing is recommended, such as dust mask, protective gloves, sturdy non-slip footwear and ear defenders.
- Do not reach into the machine while it is running.
- Chips and splinters must not be removed while the machine is running.
- The dust produced when using this tool may be harmful to health. Do not inhale the dust. Use a dust absorption system and wear a suitable dust protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
- Do not machine any materials that present a danger to health (e.g. asbestos).
- When grinding metal, flying sparks are produced. Take care that no persons are endangered. Because of the danger of fire, no combustible materials should be located in the vicinity (spark flight zone). Do not use dust extraction.
- Do not let any metal parts reach the airing slots-danger of short circuit!
Mains Connection
Warning:
Operation is only allowed with a safety switch against stray current (RCD max.
stray current of 30mA).
Connect only to single-phase AC system voltage as indicated on the rating
plate. It is also possible to connect to sockets without an earthing contact
as the design conforms to safety class II.
Only plug-in when machine is switched off.
Maintenance
Warning:
Unplug the machine before any work on it.
- Repairs and works specified in these Instructions may only be performed by qualified authorized staff.
- Use only original accessories and original spare parts.
- Keep the device, in particular the air vents, clean at all times. Never spray water on the device’s body!
- Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only.
- Caution! If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person to avoid danger.
- Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
- If necessary, a list of spare parts can be found at www. guede.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>