HYUNDAI RAC 878 BG Projection Radio Clock Instruction Manual

June 5, 2024
HYUNDAI

HYUNDAI logo

HYUNDAI RAC 878 BG Projection Radio Clock

Dear customer, thank you for purchase of our product. To achieve the utmost in enjoyment and performance, please read this manual carefully before attempting to operate the unit in order to became familiar with its features, and assure you years of faithful, trouble free performance and listening pleasure.
CAUTION:
to prevent electric shock, match wide blade of plug to wide slot. Fuly insert. Attention: pour eviter les chocs electriques Introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu‘ au fond.

  • The lightning flash with arrowhead symbol, within an equiletedel triangle is intended to alert the user to the presence of uninsulated •Dangerouss Voltage‘ within the product‘s enclosure that may be of sufficient magnitude to constitute a ask of electric shock to persons.
  • The exclamation point within an equilateral traingie is mended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera-ture accompanying the appliance.

SAFETY INSTRUCTIONS

This appliance is not intended for use by persons people (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning the way of use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

HYUNDAI RAC 878 BG Projection Radio Clock 1

  1. ON/OFF/AUTO/BUZZ
  2. LED DISPLAY
  3. AUTO INDICATOR
  4. SNOOZE/SLEEP OFF
  5. ALARM SET
  6. TIME SET
  7. SLEEP SET
  8. ALARM OFF
  9. HOUR SET
  10. MINUTE SET
  11. VOLUME CONTROL
  12. FOCUS
  13. TUNING CONTROL
  14. BATTERY BACK-UP
  15. FM ANT.WIRE
  16. AC CORD
  17. POINTER
  18. PROJECTION ON/OFF
  19. PROJECTION
  20. TIME SET BUTTON FOR PROJECTION
  21. HOUR SET BUTTON FOR PROJECTION
  22. MINUTE SET BUTTON FOR PROJECTION
  23. WAVE BAND

NOTE: PLEASE PRESS THE KEY KNOB BUTTON IN THE DIRECTION AS INDICATED IN THE PICTURE.

AC POWER OPERATION

Before connecting to the power supply ensure that the supply corresponds to the information on the making plate at back of the apparatus: 230V~50Hz.
WARNING
Disconnect the mains plug from the supply socket when not in use. To avoid the risk of electric shock do not remove the cover of the apparatus. There are no user serviceable parts inside. To prevent fire or shock hazard do not expose the apparatus to rain or moisture.

CLOCK

  1. Set the ON/OFF/AUTO/BUZZ Switch (1) to „OFF“. Connect the Mains Cord to the power supply. The clock display will flash on and off indicating a power interruption and that the dis-play time is incorrect.
  2. To set the correct time, press the Time Set Button (6) and Minute Set Button (10), or Hour Set Button (9), together, until the correct time is displayed.
  3. Open the Clock Battery Compartment door and fit a 006P (or equivalent) 9V battery. The purpose of this battery is to store the information relating to alarm time, and to keep the clock functioning in the event of disconnection from the mains supply or power interruption. Should this occur, the clock will continue to keep time, but will not display.

TIME SETTING FOR PROJECTION

  • To preset the HOURS, press stimulaneously the HOUR BUTTON and the TIME BUTTON. And keep them depressed until the hour digits to be preset are displayed.
  • To preset the MINUTES, press stimulaneously the MINUTE BUTTON and the TIME BUTTON, and keep them depressed until minute digits to be preset the displayed.

ALARM

  1. To set the Alarm time, press the Alarm Set Button (5) and Minutes Set Button (10), or Hour Set Button (9), together until the required alarm time is displayed.
  2. Set the ON/OFF/AUTO/BUZZ Switch (1) to BUZZ, the Auto indicator (3) will illuminates. The alarm is now set to activate at the required time.
  3. The alarm can be temporarily stopped for 9 minutes by pressing the Snooze/Sleep off But-ton (4). This can be repeated up to 5 times.
  4. The alarm will activate again after 24 hours uniess the ON/OFF/AUTO/BUZZ Switch (1) is set to „OFF“.

ALARM OFF
When the alarm works, just press the ALARM OFF“ Button to end Alarm working.

SLEEP

  1. Set the ON/OFF/AUTO/BUZZ Switch (1) to „OFF“ or „AUTO“.
  2. Press the Sleep Set Button (7) and Minute Set Button (10) together. The sleep time will be displayed and count down from 59 minutes to zero. Release the buttons when the required sleep time is displayed.
  3. The radio will now operate until the sleep time has elapsed or may be switched off by pres-sing the Snooze/Sleep Off Button (4).

RADIO

The AM bands use an internal directional serial. Rotate the radio for best reception. For best FM reception ensure that the FM cord antenna is complately uncoiled and extended. Rear side of cabinet.

  1. Set the ON/OFF/AUTO/BUZZ Switch (1) to „ON“ position.
  2. Set the Waveband Switch (23) to the required waveband.
  3. Adjust the Tuning Control (13) to select the desired station.
  4. Adjust the Volume Control (11) is required.
  5. To turn off the radio, set the ON/OFF/AUTO/BUZZ Switch (1) to „OFF“. If the radio does not switch off this may be caused by inadvertent operation of the Sleep Set Button (7). To can-cel this press the Snooze/Sleep Off Button (4) once.

CLEANING

Clean the cabinet with a soft cloth moistened with water or mild detergent. Do not use solvents such as alchol, benzine or thinners, as they may damage the cabinet finish. Make sure to dis-connect the mains lead from the supply before cleaning. Please retain these instructions for future reference.
NOTE:

  • PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM.
  • MAXIMUM PROJECTION DISTANCE IS 2M.
  • THE LED DIGITAL CLOCK AND THE PROJECTION CLOCK MUST BE SET SEPARATELY.

NOTE:

  • The socket outlet shall be installed near the apparatus and shall be easily accessible.
  • The ventilaion should not be impeded by covering the ventilation openings with items, such as  newspapers, table-cloths, curtains, etc.;
  • No naked flame sources, such as lighted candles, should be placed on the apparatus.

We reserve the right to change technical specifications.

WARNING: Do not use this product near water, in wet areas to avoid fire or injury of electric current. Always turn off the product when you don’t use it or before a revision. There aren’t any parts in this appliance which are reparable by consumer. Always appeal to a qualified authorized service. The product is under a dangerous tention.

Liquidation of old electrical and electronic devices

This symbol appearing on the product, on the product accessories or on the produ-ct packing means that the product must not be disposed as household waste. Please transport the product to the respective collection point where the electric and electronic device will be recycled. Collection points for the used electric and electronic devices exist in the European Union and also in other European count-ries. By proper liquidation of the product you can prevent possible negative impacts on environment and human health, which might otherwise occur as a consequence of improper manipulation with the product. Recycling of materials contributes to protection of natural resources. Therefore please do not throw the old electric and electronic devices in the household wastes. For more detailed information please contact your local autho-rity, any service company liquidating household waste or the store where you have bought the product.
Weight (netto) 510g

Documents / Resources

| HYUNDAI RAC 878 BG Projection Radio Clock [pdf] Instruction Manual
RAC 878 BG, RAC 878 SG, Projection Radio Clock, RAC 878 BG Projection Radio Clock
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals