JOCEL DF-150A7-7 Oil Filled Radiator Instruction Manual

DF-150A7-7/DF-200A7-9/DF-250A7-11 Oil-Filled Radiator
Instruction Manual

Congratulations to you on the selection of this Oil Filled Heater. Please read this manual before using it.

BRIEF INTRODUCTION TO THE PRODUCT

This Oil filled Heater features a unique design model and pleasant & novel style, equipped with an LED display function to switch between two kinds of heat with different powers; a high-sensitivity temperature control device to control the surface temperature as well as room temperature and automatically keep constant temperature; truckles on the baseboard to move along any directions; dual security protection, anti-superheating protection device (to reset piece temperature controller), electronic temperature limiter (to control room temperature) and thermal cut-off protector (to keep the electric appliances safe under abnormal conditions). Thus, the product can be used conveniently, safely, and reliably to be quiet with no noise and no pollution to the environment and also make the internal environment clean, moistened, and comfortable, so as to be the ideal heating apparatus in offices and family rooms such as medical institutions, schools, scientific research units, etc.

STRUCTURE AND PERFORMANCE FEATURES

TECHNICAL PARAMETERS

USE INSTRUCTION

1. Open the package box, take out the machine body and check if it is intact.
2. Installation scheme:
3. Installation method:

1. After opening the box, put the oil heater upside down on the floor. If you hear the oil flow inside the heater, is normal.
2. Fix the truckles on the baseboard (referring to the installation drawing), traverse the climb through both ends of the baseboard and machine body, and screw down the screw caps on the climb.

4. Power on:

1. Before using the heater, please make sure all power sockets are 220V- 240V/-50/60HZ, with a bearable current greater than 15A.
2. You can adjust the temperature with a range of 15℃-35℃; the timer with a time range of 0h-24h; the power can be adjusted between high and low heat.
3. Power on the mechanical switch on one side. Once a “bip” is heard, the current ambient temperature shall appear on the display panel.

5. Operation:
   Press the “MODO” (mode) key once, the timing symbol will appear on the display, you can adjust the timer by pressing the (“+” or “—”) key within the range of 0h-24h. If you don’t press any key for 10 seconds, the display will appear at the ambient temperature. Press the “MODO” (mode) key twice and the temperature symbol will appear on the display, you can adjust the temperature by pressing the (“+” or “—”) key, the temperature can be adjusted within the range of 15℃-35℃. After de adjustment press the “MODO” (mode) key again to activate deselection, if you don’t press any key in 10 seconds, the immediate ambient temperature will appear on the display.
   Press the key, and the heat operating symbol will appear on the display, which means the machine is operating under low heat status. When pressing the key again, the machine stops heating.
   Press “Potencia” (power) key, the symbols of low heat position and high heat position shall work alternatively. Under low heat operating status, the low heat indicator is on and the indicator lights on each side of the display panel flicker with the upper part being red; under high heat operating status, both symbols of low heat position and high heat position shall be on, when the indicator lights on each side of the display panel flicker with the middle part being yellow and the upper and lower pars being red. ◼ When the machine is under heating status, press the “Modo” (mode) key, to adjust the timer or the temperature.
   Press the **** key only the temperature sign and the current ambient temperature are left on the display panel when the machine stops heating and is in idle status.

SAFETY DIRECTIONS

• Open the package box, take out the machine body and check whether the machine body is intact.

• When the machine is put in place according to the installation instructions and requirements, connect the power supply with an alternating current of 220-240V for the power socket and power supply; 50/60Hz; current strength ≥15A.

• Under normal operation status, never let the exposed skin contact with the machine surface so as to avoid burning.

• Try not to use the machine when children, animals, persons of low act ability and lack of self-control ability are present with nobody taking care of them.
  A reliable grounding device must be equipped with a power socket.

• During the operation, never put the power cord on the heating machine’s body surface. Never press the power cord with heavy objects.

• Do not use the radiator to dry clothing.

• It is forbidden to cover the radiator with any clothing, containers, or any other things or place it under cabinets or shelves. No barriers are to be put between the radiator and ventilation air.

• The machine should be away from all flammable substances. Never let children or disabled persons close to the machine.

• Please do not install the machine under the power socket for use.

• It is forbidden to use this heater outdoors.

• Never install the machine in any places where water may splash, i.e. bathtub, water pool, etc.

• In case of any product failures, please contact after-sales service points for inspection and repair. It is not allowed to disassemble the machine privately or replace it with fittings incompliant with safety requirements.

• Any damages to the power cord of the product should only be replaced by designated personnel of the Technical Service Center to ensure security.

• As there is a certain amount of special oil inside the machine, if it is necessary to open the oil tank for repair, it must be conducted by the manufacturer or after-sales service department. Any oil spillover or leakage should be immediately notified to the Service Center.

• The removal regulations for oil after the product is abandoned must be obeyed.

• According to relevant security clauses, the minimum distance between the machine and floor as well as walls should be at least 150mm.

• If a power cord, plug cap, or other connection accessories are not available for the heat abstractor, corresponding ones should be added according to the installation instructions during installation.

• When the machine is not to be used, close the switch firstly and then cut off the power (pull out the power plug).

• When moving or cleaning the machine, do pull out the power plug. When disconnecting the machine, close the switch first and then pull out the plug by seizing it. Never suddenly pull the power cord.

• To avoid current overload, please do not use the same socket with other electric appliances so that fires caused by overload can be prevented.

• Warning: to avoid overheating, it is forbidden to cover the heat abstractor with any objects so as to prevent unexpected risks.

• The oil heater should be placed horizontally and cannot be reversed during the operation.

TECHNICAL ASSISTANCE
Telef. 00 351 252 910351
Fax: 00 351 252 910367
E-mail: assistencia@jocel.pt
http://www.jocel.pt

References

• JOCEL Electrodomésticos

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>