Homifyco 71908W-HMF Luckyear Office Chair Instruction Manual
- June 17, 2024
- Homifyco
Table of Contents
ASSEMBLY INSTRUCTIONS
71908W-HMF Luckyear Office Chair
MODEL NO(71908W-HMF)
NOTE:
If there is any issue with our chair, please contact After-Sales Support with
your order number at [email protected]
, we will solve it for you immediately !
E-Mail:[email protected]
if you encounter any problems during installation or use. please feel free to
contact us by email and we do happy to help you.
Dear Customer
Thank you for purchasing the Luckyear Office Chair!
To help you install the chair more conveniently, we have prepared an
installation video for you, which you can view on the Amazon product page of
this chair, or directly via this link：
https://www.amazon.com/live/video/02568e4c8ca34f84bad87027fec037b2?ref=cm_sw_al_vZonIuT1SjmKS.
This office chair comes with a 5 years product guarantee, if you have any
question about chair, you can contact ours after service team, we will deal
with it for you within 24h.
After Service Team Email:
[email protected]
If you have any suggestions for ours chairs, welcome to write to us, we would
be glad to hear from you.
All the best
Luckyear Team
Components
| ITEM | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Leg | 1 |
| B | Backrest | 1 |
| C | Seat | 1 |
| D | Armrest | 2 |
| E | Seat Plate | 1 |
| F | Caster | 5 |
| G | Cylinder | 1 |
| H | Dust Cover | 1 |
| J | Screw (M6 x35mm) | 4 |
| K-1 | Screw (M6 x20mm) | 2 |
| K-2 | Screw (M6 x35mm) | 2 |
| L-1 | Screw (M6 x35mm) | 2 |
| L-2 | Screw (M6 x35mm) | 2 |
| M | Decoration Cap | 4 |
| N | T Allen Wrench | 1 |
Step 1 Step 2.
Warm Tips： When fixing these screws,
please gently tighten the screw to the corresponding hole (do not completely
tighten them, only 50%). After all screws are fixed to the corresponding
holes, then completely tigten them one by one.
Step 3.
Warm Tips When fixing these screws, please gently tighten the screw to the
corresponding hole (do not completely tighten them, only 50%).
After all screws are fixed to the corresponding holes, then completely tigten
them one by one.
Step 4.
Function
Notice & Safety
- If you have any question, please contact us by [email protected].
- Please read the instructions completely before assembly.
- Do not stand in this chair or use the chair as a step ladder, use it as a chair only.
- This chair is designed for one person weighing up to 300Ibs.
- Do not use chair unless all bolts, screws are firmly secured. Check all bolts, screws and knobs every 90 days. If any part is loose, tighten the corresponding screws in time.