inventor FS405B Floor Standing Fan 50W User Manual
- June 5, 2024
- inventor
Table of Contents
inventor FS405B Floor Standing Fan 50W
CAUTION For safe operation please read and follow the below
Instructions carefully.
WARNING
-
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
-
To avoid the risk of electrical shock, do not immerse the unit, cord or plug in water or any other liquids.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. -
When the appliance is not operating, and, prior to cleaning, please unplug from the power socket.
-
When assembling the fan, make sure that the protective fan grill covers are properly installed.
-
After the fan assembly, do not remove the rotor blade guard.
-
Do not disassemble the rotor blade guard to clean the rotor blades.
-
Use a slightly damp cloth to clean the fan enclosure and rotor blade.
-
Do not allow any water or other liquid to enter the motor housing.
-
Do not dispose this product as unsorted municipal waste. This appliance requires special treatment for disposal. It is prohibited to dispose of this appliance in domestic household waste. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, contact the retailer, it is possible they may dispose of it at a recycling facility.
RULES FOR SAFE OPERATION
- While the fan is operating, no sharp objects, such as pencils, should be inserted through the protective grill. Be extra cautious when handling and be certain no fingers penetrate beyond the protective grill area, this should be strictly avoided at all times.
- Be certain that the fan is disconnected when repositioning from one location to another.
- Be certain that the fan is on a stable surface while operating, to avoid accidental tipping.
- Be extra cautious when operating near a window as rain may cause electric shock.
- This device is intended for domestic use only.
INSTALLATION INSTRUCTIONS
Name of components
ASSEMBLY OF CHASSIS & COLUMN UNIT
-
Unscrew the 7-shape Bolt from the Extension Pole (Fig.1).
-
Insert the extension pole into the chassis and tighten the 7-shape Bolt (Fig.2).
-
From the extension pole loosen the height adjustment ring and adjust the internal pole to the desired height. (Fig.3)
( Note: If you can’t find the internal pole, check if it is housed inside the extension pole. You can pull it out from the extension pole.) -
To attach the motor housing section to the internal pole, loosen the thumb screw on the bottom of the motor housing section. Place the motor housing section on the internal pole and tighten the thumb screw in alignment with the groove on the internal pole. (Fig.4)
CAUTION: Height adjustment ring must be fully fastened before the assembly of the motor housing section to the internal pole. -
Usage of the remote control hook: Clip the hook to the internal pole along with the opening, with the straight face of the accessory facing up. The hook can be moved up and down along the pole (Fig.5). The hook hole of the remote control may be linked to the hook for storage when not in use. (Fig.6)
GRILL & FAN BLADE ASSEMBLY
- Unscrew the spinner clockwise (or take the spinner out from the bag) and the plastic nut counterclockwise to remove both of them. Fix the rear grill to the motor housing, then tighten the plastic nut again. (Fig.7)
- Insert the fan blade into the motor shaft, and make sure the retaining pin on the motor shaft is fitted into the slot of the fan blade. Turn the spinner counterclockwise to tighten the blade.(Fig.8)
- Fasten the front grill and the rear grill by the grill clip and then tighten the fan grill locking screw and nut. (Fig.9)
OPERATION INSTRUCTIONS
Remote Controller (Fig.10)
-
“ ” On/Off Pressing the “ ” key will turn on. The fan will start at normal mode. Press the “ key again to turn off the fan.
-
” Fan Speed
While the fan is operating, by pressing the “ ” key will change the fan speed. Available fan speed settings: 0-1-2-3 (Off-Low-Medium-High). -
“ ” Timer
While the fan is operating, by pressing the “ ” key, you can set up the timer to turn off the fan. While the fan is turned off, by pressing the “ ” key, you can set up the timer to turn on the fan. You can select from 0.5 to 7.5 hours by pressing the “ ” key again (each press increases the timer by 0.5 hours).
The respective timer indication(s) on the display will light up. You can add the light timer indications to read the selected/remaining time until the unit turns on/off.
For instance, if the required timer setting is 6.5 hours, the “ ” key must be pressed repeatedly until the timer indication 0.5h, 2h and 4h are light at the same time.
During the Timer operation, the light timer indications will change every 0.5 hours to indicate the remaining operation time.
To deactivate the Timer function and restore the continuous operation of the fan, press the “ ” key repeatedly until all timer indications are not light. -
“ ” Swing
While the fan is operating, pressing the “ ” key will start the horizontal swing of the fan. Press the “ ” key again to turn off the horizontal swing function. -
“ ” Mode
While the fan is operating, by pressing the “ ” key, you select between the 3 different modes of operation (Normal-Natural-Sleep). The selected mode indication on the display will light up.-
“ ” Normal operation of fan.
While the unit operates under Normal mode you can press the Fan Speed key to select between the 3 available fan speeds (Low-Medium-High). -
“ ” Natural
Under Natural mode, the fan will continuously increase and decrease the fan speed to provide a more natural wind feeling. -
“ ” Sleep
Under Sleep mode, the fan will provide air for more comfortable sleep, while working more silently.
-
-
“ ” Silent
While the fan is operating, by pressing the “ ” key, the fan will enter the Silent function.
While the unit operates under Silent function only the Silent indicator will be light on the display, and the keys Fan Speed and Mode will not be operational (the rest of the keys will still be operational).
To turn off the Silent function and return to the previous operation settings of the fan, press the “ ” key again.
Batteries (not included in the packing)
Slide the battery compartment cover. Insert the batteries, and make sure that
the batteries are placed as shown in Fig.11.
Slide back the battery cover.
NOTES: Use manganese or alkaline batteries of type “AAA”. Do not use
rechargeable batteries.
WARNING!
Do not dispose of batteries in fire, batteries may explode or leak. Do not mix
old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel- cadmium)
batteries.
Always safely dispose of used batteries.
Remote Control Operation
To operate the fan with the remote controller, always point the remote
controller at the display of the fan, then press the keys.
The remote controller will work at distances of up to roughly five meters and
a maximum angle of ±15º.
Control Panel (Fig.12)
The keys of the control panel of the fan have the same operation as described in the Remote Controller section.
Tilt Adjustment
To adjust the tilt of the air flow upwards or downwards, push the motor housing lightly to the desireddirection.
Height Adjustment
To adjust the height of the fan, loosen the height adjustment ring, carefully raise or lower the top section of the fan and firmly retighten the height adjustment ring.
Overheat Protection
To protect from damage due to overheating for any unexpected reason, the fan is equipped with a thermal fuse that burns out and turns off the fan.
MAINTENANCE INSTRUCTION
This fan requires limited maintenance. Do not attempt to fix on your own. Always refer to qualified personnel if any service is required.
- Prior to cleaning and assembling, the fan must be unplugged.
- To ensure adequate air circulation to the fan’s motor, vents at the rear of the fan motor should be free of dust at all times. Do not disassemble the fan in order to remove the dust.
- The exterior parts of the device may be wiped with a soft and damp (with a mild detergent) cloth.
- The use of any abrasive detergent or solvents, gasoline, or paint thinner for cleaning purposes should be avoided as this may result in damaging the surface of the fan.
- Water or any other liquids in the motor housing or interior parts of the fan must be avoided at all times.
CLEANING
- Prior to performing any cleaning the device must be unplugged.
- All plastic parts of the device should be cleaned with a soft moist cloth and with mild soap. Thoroughly clean any soap excess with a dry cloth.
All the pictures in the manual are for explanatory purposes only. The actual
shape of the unit you purchased may be slightly different, but the operations
and functions are the same.
The company may not be held responsible for any misprinted information. The
design and the specifications of the product for reasons, such as product
improvement, are subject to change without any prior notice.
Please consult with the manufacturer at +30 211 300 3300 or with the Sales
agency for further details. Any future updates to the manual will be uploaded
to the service website, and it is advised to always check for the latest
version.
Scan here to download the latest version of this manual. www.inventorappliances.com/manuals