Audizio 50W Nimes Stereo HiFi System Instruction Manual

Audizio 50W Nimes Stereo HiFi System

Instructions

Congratulations to the purchase of this Audio product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

• Prior to using the unit, please ask for advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
• The unit contains voltage-carrying parts. Therefore do NOT open the housing.
• Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
• Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
• The unit is not suitable for continuous use.
• Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
• When unplugging the unit from a mains outlet, always pull the plug, never the lead.
• Do not plug or unplug the unit with wet hands.
• If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
• If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
• To avoid fire and shock hazard, do not expose the unit to rain and moisture.
• All repairs should be carried out by a qualified technician only.
• Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
• During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
• If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
• To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
• Do not repeatedly switch the fixture on and off. This shortens the life time.
• Keep the unit out of the reach of children. Do not leave the unit unattended.
• Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
• Do not force the controls.
• This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
• If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
• If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
• If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
• Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
• Keep away from electronic equipment that may cause interference.
• Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
• Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
• Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
• The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
• Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Audizio cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

FRONT PANEL

1. POWER ON/OFF
   Standby on/off

2. SOURCE
   Switch between FM/CD/BT or aux in

3. BACK BUTTON
   Previews track, or searching manual FM sender

4. FORWARD BUTTON
   Next track, or searching FM sender

5. PLAY/PAUZE/FM SCAN
   Push to do a automatically search

6. STOP

7. MEMORY
   Push to select on of the storage senders

8. VOLUME +

9. VOLUME –

10. AUDIO IN

11. USB

12. PHONES

13. SPEAKERS

14. CD TRAY

15. DISPLAY

16. RC SENSOR

REMOTE

1. STANDBY/ON
2. SLEEP (PRESS REPEATEDLY TO ADJUST)
3. EQ (PRESS REPEATEDLY FOR PRESET)
4. PLAY / PAUSE / FM SCAN
5. PREVIOUS TRACK / STATION
6. X-BASS ON/OFF
7. PRESET/FOLDER LEFT
8. MUTE (TOGGLE MUTE ON/OFF)
9. SOURCE (PRESS REPEATEDLY FOR SELECTION)
10. MONO/ST. (FM)
11. CLOCK / TIMER
12. PLAY MODE (REPEAT & RANDOM MODES)
13. NEXT TRACK / STATION
14. MEMORY (STATION PRESETS)
15. FOLDER (TOGGLE FOLDER MODE MP3)
16. STOP
17. PRESET/FOLDER RIGHT
18. VOL-
19. VOL+

GETTING STARTED

1. Unpack the digital radio and remove all packing materials.
2. Completely unwind the power cord and plug it into the wall outlet.

TIME SETTING

• Press the ON/STAND-BY button to turn the power off.
• Press and hold the CLOCK/TIMER button 2 seconds, to adjust the day.
• Press [ ] Or [ ] to choose 12h / 24h display format and confirm with CLOCK/TIMER.
• To set the hour, use [ ] Or [ ], then press CLOCK/TIMER.
• Repeat, to set the minutes.

time operating

In this example, the clock is set for the 24-hour (0:00) display.

• Press the CLOCK/TIMER Button once to turn the TIME function on. The TIME indicator will appear in the DISPLAY.
• Press the CLOCK/TIMER button 2 seconds, Operation again CLOCK/ TIMER button until ”ON” Appears.
• Press [ ] Or [ ] to select Timer set and press the CLOCK/TIMER button.
• Press [ ] Or [ ] to select “OFF”, and press the CLOCK/TIMER button.
• Set the time to finish as in steps 3 and 4 above.
• To select the timer playback source (TU, CD, USB), press the or button. Press the CLOCK/ TIMER button.
• Adjust the volume using the VOLUME (+ or -) on the main unit or VOL +/- on the remote control, and then press the CLOCK/TIMER button. Do not turn the volume up too high.
• The indicator lights up and the unit is ready for timer playback.

SLEEP OPERATION

This function allows you to program the system to switch off itself after a set period of time. You can set your sleep time in power on mode:

• To activate the sleep function, press the SLEEP button on the remote, the display will show “SL 90, 80, 70, 60, 50, 40, 30, 20, 10, 00” .
• When the display shows your desired sleep time, release the button, the sleep timer is now activated. The display will show “SL10” is to indicate “10 minutes” sleep time and so on. When the sleep time counts to zero, the unit will go off.
• To cancel sleep, press the SLEEP button once again until you see ‘’SL00’’, the sleep function will turn off.

ALTOMATICSTATION SEARCHIEMSTANI

You can use the FM Scan function to automatically scan for new digital radio stations and remove inactive stations.
Press and hold the PLAY / PAUSE / FM SCAN button on the stereo system or on the remote control for 2 seconds to select [Scan]. Scan will be displayed during the automatic station scan. When the automatic station scan is finished, the last station listened to will be tuned in. If the last listened station is not available, the first station in the alphabetical list is tuned in.
To manually tune in a specific radio station, tap the [ ] Or [ ] button on the stereo or remote control repeatedly.
STATION STORE
Calling up saved stations
If you are in radio mode, you can call up the stored radio stations by repeatedly pressing PRESET LEFT or PRESET RIGHT on the remote control. When you access the preset stations for the first time, [P01] blinks on the display.

AUX MODE

• Use a connection lead to connect the portable audio player etc. to the AUDIO IN socket
• Press the ON/STAND-BY button to turn the power on.
• Press the SOURCE button on the remote control or main unit repeatedly to select AUDIO IN function.
• Play the connected equipment. If volume level of the connected device is too high, sound distortion may occur. Should this happen, lower the volume of the connected device. If volume level is too low, increase the volume of the connected device.
  The AUDIO IN terminal allows you to connect various devices such as an MP3 player, cassette player, minidisc player, DVD player, etc.

CO PLAYER

• Switch the unit on and switch it to CD mode with SOURCE Button.
• Open the CD tray by pressing the upper left corner („Open/Close“) and insert a CD with the top facing you.
• The CD will play as soon as the device has read the contents. This may take a few seconds.

Repeat and random mode

• Press PLAY MODE on the remote control to select REPEAT1 (plays the current track in a loop), REPEAT ALL (plays the entire CD in a loop) or RANDOM (plays the tracks on the CD in random order). A logo is displayed in the top right corner of the display.
• Press PLAY MODE again to return to normal play mode.

Programmed play (Playlist)
You can choose up to 32 selections for playback in the order you like. NOTE: Program can only be set in STOP mode.

• While in stop mode, press MEMORY on the remote control to enter the programming mode.
• Press [ ] Or [ ] on the remote control to select the desired track.
• Press MEMORY to save the track number.
• Repeat for other tracks. Up to 32 tracks can be programmed. If you want to check the programmed tracks, press the MEMORY button repeatedly.
• Press the play button to start playback.

LISB

Folder mode

1. Select USB mode using SOURCE button on the unit or the remote control.
2. Connect a USB mass storage device (USB stick, MP3 player) that contains MP3 files, this will take a few seconds.
3. Use the FOLDER button on the remote control to switch to FOLDER mode, “FOLD” will appear in the display.
4. Use the left/right arrow key on the remote control to select the desired folder that already stored in the USB device.
5.  Navigate with BACK or FORWARD or PLAY/PAUSE button on the unit or on the remote control.

BT STEREO PAIRING

BT wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 10 meters.
Pairing with BT devices:
Press the ON/STAND-BY button to turn the power on.
Press the SOURCE button (remote control or unit) to select BT function.
(“—-” flashes)Perform a pairing procedure on the source device to detect this unit. “Audio Nimes” will appear in the detected devices list (if available) in the source device. (Refer the source device operating manual for details).
Notes
Place the devices to be paired within 1 meter (3 feet) of each other when pairing.
Select “Audizio Nimes” from the source list. If Passcode* is required, enter “0000”. The passcode may be called PIN Code, Passkey, PIN number or Password.
The pairing indicator (conn) will appear once the unit is successfully paired with the source device.(Pairing information is now memorized in the unit.) Some audio source devices may connect with the unit
automatically after pairing is completed, otherwise follow the instructions in the source device operating manual to start connection.

GLOBAL FUNCTION

MUTE
The Volume is muted temporarily when pressing the MUTE button on the remote control. Press
again to restore the volume.
X-BASS
When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and “X-BASS” indicator will appear. To cancel the extra bass mode, press the X-BASS button on the remote control.
EQ
When the EQ button on the remote control, the current mode setting will be displayed. To change to a different mode, press the EQ MODE button repeatedly until the desired sound mode appears (“CLASSIC, POPS, JAZZ, ROCK”).

References

• Audizio – always a square deal
• Samen zijn we open. Samen staan we sterk. - Stichting Open
• Samen zijn we open. Samen staan we sterk. - Stichting Open
• Homepage - Wecycle
• Homepage - Wecycle

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>