URC UR2-211 Universal Remote Easy Clicker User Guide

: June 5, 2024
: URC

URC UR2-211 Universal Remote Easy Clicke

Introduction

This remote control is designed to operate most Digital, Analog Cable boxes, IPTV set top boxes and TVs.

Replacing Batteries

Before you program or operate the remote control, you must install two new AA alkaline batteries.

STEP1

Remove the battery com partment cover from the back of your remote control.

STEP2

Check battery polarity carefully, and install the batteries as shown in the illustration below.

STEP3

Replace the battery com partment cover.

Button Functions

URC UR2-211 Universal Remote Easy Clicke 2

Programming the Remote Control

Note
When you are instructed to press a [DEVICE] button, that means you should press either the CBL or TV button, depending on which device you are programming the remote to operate.

A Ouick Set Up Method

Set up tahle af codes

STEP 1

Turn on the component you want to program. To program your TV, turn on the TV.

STEP2

Press and hold the DEVICE.key for 5 seconds until the Device LED will blink once and stays on. Continue to hold the [DEVICE] key and press the number key assigned to your brand in the Quick Set up Code Table and release both [DEVICE] key and the number key to save the code. The Device LED will blink twice to confirm that the code is stored.

STEP 3

Point the remote control at the component.

STEP 4

Press the power button. If it turns off, it is programmed for your component. If it does not turn off, use the Pre-Programmed 3-Digit code Method or Scanning Method. Repeat the steps above for all components (CBL, TV).

Quick Set up Code Table

CBL

Quick Number	Manufacturer/Brand
0	PACE DTA
1	SA/CISCO, SAMSUNG, PACE DIGITAL
2	MOTOROLA DIGITAL
3	MOTOROLA DTA
4	EVOLUTION DTA
5	CISCO IPTV
6	ADB IPTV
7	TECHNICOLOR
8	AMINO 140/540 IPTV
9	MOTOROLA IPTV

TV

Quick Number	Manufacturer/Brand
0	SANYO
1	SONY
2	SAMSUNG
3	LG
4	TOSHIBA
5	PANASONIC
6	PHILIPS
7	HITACHI
8	SHARP
9	VIZIO

MANUAL PROGRAMMING

The remote control can be programmed by entering a three-digit code number that corresponds to particular brands and models of equipment. The three-digit code numbers are listed in the code tables.

STEP 1

Turn on the equipment that you want the remote con-trol to operate Cable Box or TV.

STEP 2

Press the DEVICE button and the OK/SEL button simultaneously for 3 seconds. The corresponding device LED will turn on indicating that it is ready to be pro-grammed. The LED will remain on for 30 seconds. The next step must be entered while the LED is on.

STEP 3

Point the remote control toward the equipment and enter the three digit code number assigned to your brand from the code tables. If there are more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.

Note
You can verify that you have selected the correct code by pressing the POWER button. The equipment should turn back on. Then try all of the functions on the remote control i.e. volume, mute, etc to ensure you have the correct code. If any of the functions do not operate as they should repeat .

STEP 4

Store the three digit code by pressing the same DEVICE button once again. The device LED will blink twice to confirm that the code has been stored.

Auto Search Method

None of the three digit code numbers assigned to your brand of equipment works, or the code table does not list your brand, you can use the Auto Search Method to find the correct three digit code number for your equipment by following steps

STEP1

Presson the equipment that you want the remote control to operate Cable Box or TV.

STEP 2

Press the DEVICE button and the OK/SEL button simultaneously for 3 seconds. The device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 30 seconds. The next step must be enter-ed while the LED is on.

STEP 3

Press the CH5 or CH6 button one at a time or keep it pressed. The remote will emit a series of Power ON/OFF code signals. Release the [CH5] or CH6 button as soon as the equipment turns off.

Note
You can verify that you have selected the correct code by pressing the POWER button. The equipment should turn back on. Then try all of the functions on the remote control i.e. volume, mute, etc to ensure you have the correct code. If any of the functions do not operate as they should, repeat The Device LED will blink twice to confirm that the code has been stored.

PROGRAMMING OF ALL BUTTONS

This allows you to program the All Off button so it can send up to two power On/Off commands with one button press.

STEP 1

Press the CBL button.

STEP 2

Press the All OFF button.and the [OK/SEL] button simultaneously for 3 seconds. The CBL will turn on for 30 seconds.

STEP 3

Press the first Device button. you want to store in the [ALL OFF] button and then the [POWER] button. Repeat this for other Device until you have stored all the desired power commands into the ALL OFF button.

STEP 4

Press the CH5 button to save the power commands you stored. The CBL button will blink twice to confirm the Device have been saved.

PROGRAMMING VOLUME CONTROL

By default, the VOL+, VOL- and MUTE keys operate through your TV. If you would like those keys to operate those functions on a different device, follow these steps.

STEP 1

Press the OK/SEL button and CBL button simultaneously for 3 seconds. The device LED will turn on for 30 seconds. The next step must be performed while the LED is on.

STEP 2

The VOL+ button. The device LED will blink.

STEP 3

Press the DEVICE button.corresponding to the device that you would like the volume and mute buttons to control. The device LED will blink twice to confirm the programming.

Note
If you wish to have the volume and mute keys operate your Cable Box, press the CBL button.

PROGRAMMING CHANNEL CONTROL

By default, the CH5, CH6 keys operate through your Cable Box. If you would like those keys to operate those functions on a different device, follow these steps

STEP1

Press the OK/SEL button and [CBL] button simultaneously for 3 seconds. The device LED will turn on for 30 seconds. The next step must be performed while the LED is on.

STEP 2

Press the VOL button. The device LED will blink.

STEP 3

Press TV button. The device LED will blink twice to confirm the programming.

MEMORY LOCK SYSTEM

This remote control is designed to retain programmed memory for 10 years — even after batteries are removed from the remote control. For additional information about your remote control, go to www.universalremote.com

Set up Code Tables

CBL

Manufacturer/Brand	Set- Up Code Number
SCIENTIFIC ATLANTA	003 251
PACE	001 003 204 206 217 002
MOTOROLA	001 206 253
ADB	254 255 315 259
Amino	219 260 249 256 257 261 235
ARRIS	192 216 140
AT&T	251
BELL FIBE	205 229
BT Vision	232 960
CHANNEL MASTER	006
CINCINNATI BELL	194 220
CISCO	003 005 007 002 251 316
COMCAST	195 002
CONFLUENT	196
Cox Digital Cable	223
DigitalMultimediaTechnology	222
DIGITAL STREAM	580
DIRECTV	238
Dish Network	122
Duoson	218
DVB(DigitalVideoBroadcasting)	193
Entone	221 155 258 213
EVOLUTION	189 215
Foxtel	228
HOMECAST	004
Horizon	225
Humax	231
Innovative Systems	262
Layer3	226
MINERVA	178

Manufacturer/Brand	Set Up Code Number
MOTOROLA DSR	148
MOXI	111
MYRIO	254 255
NAGRAVISION	201
NBOX	181
NOW TV	314
Optimum	236 237
Pico Digital	224
SAMSUNG	003
Sky	240 241
Spectrum	231
SUDDENLINK	579
TECHNICOLOR	365 002
THOMPSON	365 002
TRANSPARENTVIDEOSYSTEMS	193
Virgin Media	959
WEGENER	250
WINDSTREAM	212
ZeeVee	227

TV

Manufacturer/Brand	Set Up Code Number
ADMIRAL	072 081 160 161 096
AD NOTAM	672
ADVENT	147 224
AFFINITY	680
AIWA	238 141 145
AKAI	031 070 146 004 148 124 226 104 108 615
AKIO	103
ALARON	028
ALBATRON	253
AMARK	112 127
AMERICA ACTION	043
AMERICAN HIGH	236
AMPRO	073 167 245
ANAM	043 054 056 080 112 236
AOC	058 070 004 112 616
APEX	572
APEX DIGITAL	015 150 036 037 424
AQUAVISION	164 686
ASTAR	164
AUDIOVOX	076 103 043 035 224 228 078
AUVIO	689
Avera	761
AVION	223
AXESS	711
AXION	043
BAYSONIC	043
BELL&HOWELL	072
BENQ	600
BRADFORD	043
BROKSONIC	231 252 096 170
BYDESIGN	254
CAIRN	162
CANDLE	070 002 003 004
CANON	236
CAPEHART	058
CARVER	164
CELEBRITY	001
CETRONIC	043
CIELO	101
Ciil	732
CINERAL	103 120

Manufacturer/Brand	Set Up Code Number
CITIZEN	070 002 003 004 101 103 127
CLASSIC	043
COBY	640 641 671 004
CONCERTO	004
CONTEC	043 051
Continu-us	161 746 747
CORONADO	127
CRAIG	043 054 028 239
CROSLEY	164
CROWN	043 127
CURTIS MATHES	070 004 101 127 236 011 072 081 120 164
CXC	043
DAEWOO	076 103 112 004 127 016 043 044 125 120

235 249

151 153 154 231 236 238 247 252 168 121

514

056 074 091 155 232 233 236 239 245 081

120

Manufacturer/Brand	Set Up Code Number
127 158 236 238 587 614 749
HP	027 039 098
HQ	238 046
HUMAX	122
HYPERION	609
HYUNDAI	049 067
ILO	055 096
INFINITY	164
INFOCUS	215 225 046 532 595 726 733
INKEL	129
INSIGNIA	068 069 078 096 100 164 168 229 026 454

604 617

INSTANTREPLAY| 236
INTEQ| 073
JBL| 164
JCB| 001
JCL| 236
JCPENNEY| 004 008 024 030 065 070 101 127 160 156

234 236 239 247

164 094 160 056 236 238 243 205 028 138

168 035 211 077 050 218 594

200 450 550

MONIVISION| 253
MOTOROLA| 081
MTC| 070 004 062 101 238 239
MULTITECH| 238 043
NAD| 015 025
NEC| 070 130 134 040 056 007 019 024 004 182

140 575 717 758

NEXUS| 620 078
NIKEI| 043
NIKKO| 103
NIKO| 175

Manufacturer/Brand	Set Up Code Number
NORCENT	211
NORWOOD MICRO	079
NTC	103
NUVISION	084 567 667
OLEVIA	219 004 161 144 160
ONKING	043
onn.	898
ONWA	043
OPTIMUS	080
OPTOMA	029 032
OPTONICA	019 081
ORION	096 201 203 204 205 231 252 028
PANASONIC	080 164 190 034 056 234 236 244 230 248

524 624 607 664 801

PEERLESS-AV| 723 763
PENTAX| 236
PHILCO| 070 003 004 024 056 059 060 063 064 127

164 236 238 243

PHILIPS| 164 004 005 038 093 127 070 003 059 236

238 243 247 199 218 144 161 594 773

PILOT| 247
PIONEER| 023 025 135 176 004 018 070 183 191 208

214 182 660

PLANAR| 728 742 787 788
POLAROID| 015 024 031 046 086 092 097 224 228 006

110 026 118 119

074 152 232 233 236 238 239 081 588 713

070 237 239 461 578 655

238 247 052 164

496 692 735

SHERWOOD| 129 128
SIGNATURE| 072 238
Silo| 001

Manufacturer/Brand	Set Up Code Number
Skyvue	744
SKYWORTH	164 895
SOLE	177 178
SONY	001 608 651 126 139 236 240 241 602
SOUNDESIGN	003 004 028 043 238
SOVA	004 169 174
SOYO	163
SPECTRICON	112
SPECTRONIQ	004
SQUAREVIEW	052
SSS	004 043
STARLITE	043
SUNBRITE	608 001 635 605 772
SUPERSCAN	168
SUPRE MACY	002
SUPREME	001
SV2000	168
SVA	046
SYLVANIA	070 003 052 059 060 063 064 127 160 164