Thermaltake CL-P021-CA12RE-A Riing Silent 12 PRO CPU Cooler Instruction Manual

Thermaltake CL-P021-CA12RE-A Riing Silent 12 PRO CPU Cooler

Application for

FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2

Parts list

1. Cooler x 1
2. Thermal Grease x 1
3. Bracket x 1
4. Back-plate x 1
5. Nuts x 4
6. Screws x 4 (9.6mm)
7. Screws x 4 (13.6mm)
8. Screws x 4 (16.6mm)
9. Mounting Plate x 1
10. 12cm Fan x 1
11. Fan clip x 2
12. Screws x 4 (10mm)

Installation Preparation

1. Before Installation, please verify the CPU platform and select the appropriate holes for your CPU socket.

2. Hole A for LGA1366/1156/1155/1151/1150/775 & AMD FM2/FM1/AM3+/AM3/AM2+/AM2

3. Hole B for LGA 2011

4. Put the buckle(K) and the fan( J) together with the screws (L).
   Install FM2/FM1/AM3+/AM3/AM2+/AM2 Clip

5. When you install Back-plate (D) make sure the side with the foam is facing the motherboard.

6. Insert the four Screws (G) through the Back-plate (D) and the motherboard and secure them with Nut (E). Place Bracket (C) onto the Nuts(E) and secure it with Screw (F). Make sure the Tt logo on the Bracket (C) is upward facing.
   Note:
   If the Bracket (C) is not firmly secured, please slightly loose the screws (G) and fasten the screws (F) again.

7. Apply a thin layer of Thermal Grease (B) onto the CPU.

8. Screw the Heat-sink (A) onto the motherboard with the Mounting Plate (I) tightly.

9. Following the step2, make the buckle(K) and the fan(J) fixed on the cooler(A)

10. Connect the 4-pin wire to the motherboard’s CPU fan connector.

11. Installation is done.

Please visit our Support Section for more technical support or update at
www.thermaltake.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>