EATON Condulet Body Elbow Explosion proof Iron Alloy User Guide
- June 5, 2024
- EATON
Table of Contents
EATON Condulet Body Elbow Explosion proof Iron Alloy User Guide
Applications
Condulet LBY elbows are installed in conduit systems to:
- Act as service entrance elbows between service entrance and vertical weatherhead conduit runs
- Make 90° bends in conduit systems where space is limited
- Act as pull outlets
- Provide access to conductors for maintenance and future system changes Condulet ET short radius tees are installed in conduit systems:
- In concealed conduit runs allowing single conduit stub up to outlet boxes located above or below main conduit run; eliminates separate feed and return conduits to flush floor box or junction box
Features
LBY elbows have:
- Maximum volume for bends within a compact overall size
- Screw-on cover for ease of installation and removal
- Cover openings on an angle, permitting conductors to be pulled straight through either hub
- Taper tapped hubs and integral bushing for standard threaded conduit ET short radius tees have:
- Compact size, small radius of bend for use in concealed or open conduit systems; particularly suited for use in shallow floors or partitions
- Taper tapped hubs and integral bushing for standard threaded conduit
Certifications and compliances
- UL standard: UL514B
- Fed. Spec.: W-C-586a
Standard materials
- LBY elbows – Feraloy iron alloy
- ET tees – Feraloy iron alloy
Standard finishes
- Copper-free aluminum – natural
- Feraloy iron alloy – electrogalvanized and aluminum acrylic paint
Options
Description/Suffix
Material – copper-free aluminum ……… SA
Available on LBY elbows only
Ordering information
Dimensions (in inches)
www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2022 Eaton 23
Read User Manual Online (PDF format)
Loading......