T nB UMREFLECT2 LED Reflection Kit Instructions

T nB UMREFLECT2 LED Reflection Kit

OUR Thank

Congratulations on your purchase and thank you for the trust you have placed in T’nB.
Our products comply with the all relevant regulations and standards. Before using this equipment, we recommend that you read the instructions and safety instructions carefully and keep this manual for future reference.

PRODUCT AND CONTENT DESCRIPTION

This product is intended to improve the visibility of the wearer, day and night, in the light of headlights. These accessories should be worn over any other clothing and should not be covered by a backpack. Product reserved for non-professional use.

A]: LED Clip
(1) ON/OFF button
[B]: Reflective armband

A) CLIP LED USER MANUAL

TYPE OF EQUIPMENT: LED1.

The product has been evaluated according to Protocol HDVL-001 of 10.2021

SAFETY INSTRUCTIONS:

• The power supply of your device must correspond to the original specifications initially provided.
• Never use your device underwater or in excessively humid places.
• Do not place flammable objects, explosive substances or dangerous objects near your device.
• Keep the product out of the reach of children.
• Never look directly into the light beam from the lamp. Do not point the lamp directly into the eyes of any person or animal.
• This product contains a button cell battery. Swallowing the coin cell battery can cause severe internal burns in just 2 hours and can lead to death.
• TnB declines all responsibility in the event of damage resulting from improper use of theproduct or use with a device with incompatible electrical characteristics.
• No warranty can be applied in case of misuse.

STORAGE cONDITIONS;

• Only use/store your product in an environment where the temperature is between -10°C and 40°C.
• Do not expose the clip to direct sunlight or excessive heat when storing or transporting. Indeed, this could cause cracks and deterioration, which will lead to a reduction in the lifespan and effectiveness of the product.

CONDITIONS OF EMPLOYMENT:

• Do not disassemble your product or attempt to repair or modify it yourself.
• Handle the product with care.
• The LED of this accessory in no way replaces the mandatory standard lighting.
• Protection is provided only in the switched-on state and at maximum intensity.

CLEANING/MAINTENANCE CONDITIONS

Never clean the clip with solvents or abrasive products.

REVISION CONDITIONS;

• Do not use the product if it has been knocked or damaged. Before using the accessory, check that all the elements are present and that no anomaly appears to the touch. Any anomaly or degradation visible or noted to the touch can lead to a loss of performance that can be dangerous. It is then necessary to stop using it because it will no longer be able to provide correct body protection, and to replace the accessory immediately. Example of degradation: loss of effñciency of the LED.. Please note that only faultless protections are able to offer the required level of protection.
  We advise you to replace this accessory after a lifetime of 5 years from the production date (shown on the label stuck on the product).

DISPOSAL/RECYCLING CONDITIONS

• At the end of its life, the product must be returned to a dedicated collection point: the clip must be returned to a collection point dedicated to electrical/electronic products, it must not be thrown in the trash.

CHARACTERISTICS
LED light:1 CR2032 button battery. The battery should be replaced when it no longer works.

LOADING &INSTALLATION

• The LED clip works with a CR2032 button battery.
• Attach the product to all your accessories: helmet, cap, bag, shoes..
• The reflective armband slips directly on your sleeve, around your ankle…

USE

• Press the ON/OFF button (1) of the LED clip [A] to turn it on. The light flashes rapidly.
• Press a second time to switch to slower flashing.
• Press a third time to switch to a solid light. Pres one last time to turn it off.

B) REFLECTIVE ARMBAND USER INSTRUCTIONS

TYPE OF EQUIPMENT: B2-Adapted to darkness

The product has been assessed according to EN 17353:2020.

SAFETY INSTRUCTIONS:

• Keep the product out of the reach of children.
• T’nB declines all responsibility in the event of damage resulting from improper use of the product or use with a device with incompatible electrical characteristics.
• No warranty can be applied in case of misuse.

STORAGE CONDITIONS:

• Only use/store your product in an environment where the temperature is between-10°C and 40°C.
• Do not expose cuffs to direct sunlight or excessive heat when storing or transporting. Indeed, this could cause cracks and deterioration, which will lead to a reduction in the lifespan and effectiveness of the product.

CONDITIONS OF EMPLOYMENT:

• Do not disassemble your product or attempt to repair or modify it yourself.
• Handle the product with care.
• Modification of a product such as the printing of logos may compromise the minimum characteristics defined for the surfaces and performance of the product.

CLEANING/ MAINTENANCE CONDITIONS

• Do not wash armbands

• Do not bleach

• Do not tumble dry

• Do not iron

• No dry cleaning
  REVISION cONDITIONS

• Do not use the product if it has been knocked or damaged. Before using the accessory, check hat all the elements are present and that no anomaly appears to the touch. Any anomaly or degradation visible or noted to the touch can lead to a loss of performance that can be dan- gerous. It is then necessary to stop using it because it will no longer be able to provide correct body protection, and to replace the accessory immediately. Example of degradation: torn fabric, unstitched part, loss of effectiveness of the elastic bands… Please note that only faultless protections are able to offer the required level of protection.

• Care should be taken to keep the Velcro* strips clean and to avoid the deposit of large particles of dust in order to preserve their adhesiveness.

• If the adhesiveness of the Velcro® strips decreases, they must be replaced.

• We advise you to replace this accessory after a lifetime of 5 years from the production date (shown on the label sewn on the product).

DISPOSAL/RECYCLING CONDITIONS
At the end of its life, the product must be returned to a dedicated collection point: the armband can be thrown directly into the trash or taken to a recycling center for textile products.

CHARACTERISTICS

• 2 Armbands of 12 x 4 cm.
• Unique size
• Composition: 3M PVC and Polyester

USE
For Type B2 devices, at least two Type B2 devices must be used to ensure 360° viewing (viewing
from all sides). They should be placed on the left side and on the right side of the torso.

NEED HELP?
Concerned about the satisfaction of our customers, you can contact us at info@t-nb.com.
Maintenance, troubleshooting, miscellaneous information about this product, please visit our
website: www.t-nb.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>