T-nB CBKID3 KIDY Decibel Limiter Bluetooth Headphone Instructions
- June 3, 2024
- T-nB
Table of Contents
T-nB CBKID3 KIDY Decibel Limiter Bluetooth Headphone
Congratulations on your purchase and thank you for the trust you have placed in TnB. Our products comply with the all relevant regulations and standards. Before using this equipment, we recommend that you read the instructions and safety instructions carefully and keep this manual for future reference.
OVERVIEW
- Charge indicator
- USB Port
- LED
- 3.5-mm jack audio connector
- Micro
- ON/OF- Play/pause
- Volume + – next track
- Volume– Previous track
IMPORTANT SAFETY INSTRUCTIONS
- No guarantee will apply in case of misuse.
- TnB accepts no liability it the safety instructions are not respected
- Handle the device witn care.
- The power supply of your device must match the initially specified characteristics
- The socket of the electrical equipment must be located near the said equipment and easy to get to.
- Keep the device away from flammable objects, explosive substances or dangerous objects.
- Use and store your device in an environment where the temperature is between 0’T and 40.
- Store your device Out or the reach of children.
- This device is not designed to be used by persons (including children) whose physical, sensory or mental capacities are reduced, or persons without experience or knowledge, except it they are receive priornstructionon using the device by a person in chargeottneir safety disaster
- Stop using your device if it has been bit or damaged any yourself.
- To avoid the risk of electric shock, disconnect your device from the mains and from any other device before cleaning it or when not in use.
- Only use the supplied accessories and connectors. The use of any other type of accessory not intended for this purpose may irremediably damage your device.
- Take sure the appliance is switched off and cold before cleaning. Do not use any product or lubricant which may damage the appliance
- TnB accepts no liability for damage caused by misuse of the product or by use with an incompatible electrical device.
- Unless otherwise stated, never use your device in rain, in damp places or near a water source. nessne e near credit cards or other data storage devices.
- Avoid using your wireless devices near sources of interference, such as power supply cables, microwave ovens, fluorescent lamps, wireless video cameras and wireless domestic telephones.
- To improve the quality and the strength of the wireless signal, reduce the number of devices
- Operating on the same wireless frequency.
- Switch off the helmet/earphones after use and tidy it/them away in a suitable place to avoid damage, Scratches and warping
- Do not set the volume to a high level before switching on the product. Slowly increase the volume to avoid damaged cause by a high volume.
- Do not use the helmet/earphones in a dangerous place or in a location where you cannot hear outdoor sounds.
CHARGING YOUR HEADSET
- To recharge your headset, use the micro USB charging cable provided with your product.
- The charge indicator light will be red during charging. Once completely charged, the charging indicator light will turn blue. Ihe charging time is around2 hours if the product was completely discharged.
PAIRING
- Stage 1 : Press and hold the “ON button” to switch on the headset. A voice will say “Power on'” It then will automatically switch to Bluetooth mode and will be ready to be connected to a device.
- Stage 2 : Ensure that your telephone or your Bluetooth device is switched on. Open the Bluetoo- th menu of your smartphone or computer and select TNB KID in the list of Bluetooth devices.
- Stage 3: The headset will emit a sound and the LED will stay blue once pairing has been successful. If pairing fails, switch off the headset and hold down the “ON” button and restart the pairing process from the beginning.
FUNCTIONS
- Press and hold the “ON button” to switch the headset on or off
- Press “ON” briefly to Play/Pause
- Press briefly on +/-to turn the volume up/down
- Press and hold the +/-to go to the next or previous track
- When you receive a call, press “ON” briefly to reply or hang up
- When you receive a call, press and hold “ON” to reject the cal.
- To dial the last number, double click the “ON” button.
PASSIVE MODE
You can use TNB KIDS as a wired headset to save battery power. Connect 3.5 mm/3.5 mm jack audio cable between the connector of your headset and your telephone or any other audio source. Plugging in an audio cable deactivates the wireless function.
BATTERY LOW
If the headset battery is low, a warning BEEP will sound every 60 seconds. Aftera while, the headset will switch off by itself.
FEATURES
- Bluetooth version : 5.0
- Integrated battery: Lithium ion, 3.7 V, 150 mAh battery
- Play time : 11 hours (50% volume level)
- Charging time: 2 hours
- Sensitivity: 85 dB (limited for children)
- Frequency range : 20 Hz 20 KHz
- Impedance: 32
- Range : 10m
Direct current
- To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals.
- Prolonged listening at full volume can damage the user’s ear.
NEED HELP?
Concerned about the satisfaction of our customers, you can contact us at info@t-nb.com. For maintenance, troubleshooting, miscellaneous information about this product, please visit our website: www.t-nb.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>