Orbegozo HPE 8075 ELECTRIC PRESSURE COOKER Instruction Manual

Orbegozo HPE 8075 ELECTRIC PRESSURE COOKER

IMPORTANT SAFETY INSTRUCTIONS

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must never play with the appliance. Cleaning and user maintenance must never be carried out by children without supervision.
• Children should be supervised to ensure that they do not play with the appliance.
• Keep the appliance and the cable cord out of the reach of children less than 8 years old.
• WARNING: In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
•  If the supply cord is damaged it must be repaired by the Authorized Service Agent.
• Never pull on the cord when unplugging.
•  Do not use the unit with a damaged cord or plug, or if it is not working properly.
•  Do not handle the appliance with wet hands.
• Never immerse the appliance in water or any other liquid.
•  Make sure the appliance has been unplugged before cleaning.
•  This appliance must be installed following the national regulations for electrical installations.
• This appliance is for household use only.
•  In case you need a copy of the instruction manual, you can find it in www.orbegozo.com
•  WARNING: In case of misuse, there is a risk of possible injury.
  •  CAUTION: The surface can remain hot during or after use.
  •  Ducts in the pressure regulator allowing steam to escape should be checked regularly to ensure they are not obstructed. The container should not be opened until the pressure has decreased sufficiently.
  •  Never use the cooker along with inflammable products or in a humid location.
  •  The amount of water added to the inner tank should be determined in line with step 2 of operation.
  •  Never damage the sealant washer or replace it with other rubber washer or tension washer.
  •  Never twist the inner steel ring with hand or other tools. If the steel ring slips off place, stopping using the cooker until replacement is conducted.
  •  The anti-block case should be kept clean by cleaning regularly.
  •  Never attempt to uncover the cooker when the floating valve is flopping.
  •  Never apply any weight on the pressure discharging valve or replace it with other materials.
  •  Never block the periphery of the clamping position to ensure safety.
  •  The surface of the cooker and the heating plate should be clean, never use the inner tank to cook on the thermal sources or have it replaced by others cookers.
  •  The inner tank is coated with anti-sticking materials. To avoid scratch, wooden or plastic ladles are recommended.
  •  Be sure to keep your hand or face away from the air exit hole of the pressure limiting air relief valve when the cooker is turned on.
  •  The maximum length for keeping warm is 8 hours. However, the duration less than 6 hours is recommended to ensure excellent cooking effect.
  •  Large amount of steam discharging from the periphery during operations an abnormal phenomenon and the relief valve is working for protection. Unplug the power cable. Get it repaired in the maintenance shop of our company prior to use.
  •  In case of alarming during operation and displaying the following trouble code, have it repaired in our maintenance shop prior to use.
  •  When moving the cooker, hold the ears of cookers instead of the handle
  •  Dismantling or replacement by using accessories other than ours is not recommended

• *  Do not touch hot surfaces. Use handles or handholds.

  •  To avoid electric shock, do not immerse cord or plug in water or other liquid.
  •  Unplug from outlet when not in use and before cleaning. Let cool before putting on or taking off parts.
  •  The use of accessories not recommended by the manufacturer may cause injuries.
  •  Do not use outdoors (this point may be omitted if the product is designed specifically for outdoor use).
  • Do not let cord hang over edge of table or counter, or touch hot surfaces.
  •  Always disconnect first the plug from the pot, and then plug the cord into the outlet of the wall. To turn off, turn any control to “off” then remove plug from wall outlet.

FEATURES

Electric pressure cooker, a brand-new kitchen tool developed using our latest technology, the product has a combined merits of the pressure cooker, electric cooker and braising cooker. Featured by programmable temperature and pressure control, this cooker is proud of new and distinctive structure and outlook design, reliable and safe to operate, powers saving and quality cooking. An ideal cooking tool for modern family and a substitute for conventional pressure cooker.

•  Combined functions of cooking, stewing and braising
•  You do not need to set the pressure and time but select the menu; the cooker will do it automatically.
•  Custom Menu: You can adjust the cooking time from 0 – 99 minutes on your demand.
•  Power Failure Memory: Cooker resumes original sequence when power is supplied again.
•  Time & Power Saving. Power and time saved by over 60% and 40% respectively than common electric cookers.
•  Airtight cooking retains nutrition and original taste.
•  Non-sticking inner tank, easy to clean. Stainless lid and outer tank ensure long service life.
•  Following built-in safety devices:
  •  The cooker cannot gain pressure when the lid is not well closed and the lid cannot be opened when the inner pressure is too high.
  •  Relief function. When temperature and pressure inside the cooker go beyond the normal value, the pressure discharging valve will discharge the steam to regulate.
  •  De-pressure Function: When pressure limit device inside cooker fails and pressure goes beyond the limit, cooker automatically de-pressure around lid to avoid an explosion.
  •  Temperature Limit: power automatically cut off when temperature inside cooker goes beyond pre-set temperature

PRODUCT STRUCTURE

1. Handle
2. Lid
3. Pressure Discharging Valve
4.  Floating Valve
5.  Floats
6.  Inner Tank
7.  Outer Tank
8.  Tank Handle
9.  Upper Ring
10.  Control Panel
11.  Power Cable
12.  Spoon
13.  Lid Holder
14.  Water Collector
15.  Outer Shell
16.  Heating Plate
17.  Base
18. Sealant Washer of floating valve
19.  Anti-blocking case
20.  Sealant washer
21.  Sensor

TECHNICAL SPECIFICATIONS

Model| Power| Voltage Frequency| Capacity| Diameter| Work Pressure| Limited Pressure| Keep Warm Temp.| Preset Timer
---|---|---|---|---|---|---|---|---
HPE 8075| 1200-

1400

W

| 230V~50Hz| 8L| 23.5 cm| 0~70kpa| 90kpa| 60~80ºC| 1~24h

1| Timer| With this function you can adjust the time : 1-Press the timer knob

2-Adjust the time with the knob + and – 3-Select the function

---|---|---
2| Functión menú| You can choose between four different programs:

1.  Rice( Arroz): 12 minutes

2.  Soup ( Sopa) :15 minutes

3.  Meat(Carne): 15 minutes

4.  Cake( Pastel):30 minutes

In all the programs you can adjust the time by yourself with the knobs + and –

3| Time adjustble| This knobs lets adjust the booth cooking time and timer
4| Keep warm / cancel| This function keep the meal warm once the cooking finish, display will show “bb”. Moreover, you can cancel any function with this knob.
5| Time for

manual cooking

| With this function you can choose the time for the manual cooking: 1º Press the knob ”Tiempo de coccion manual”

2º With the knob + and – adjust the time .

DIRECTIONS

1.  Open the lid: hold firmly the handle, turn the lid clockwise until it loosens.

2.  Take out the inner tank and fill in food and water. Food and water should be no higher than 4/5 and no lower than 1/5 of the height of inner tank, and for expandable food, no higher than 3/5.

3.  Clean the inner tank and heating plate before put in the inner tank. Be sure no dirt or smear on the heating place and outer tank. After that, turn slightly the inner tank to make it well fit to the heating plate.

4.  Put on the cover.

   •  Check the sealant washer; make sure it has been put on the inner steel ring.
   •  Turn the sealant washer to make sure it well fit to the steel ring.
   •  Cover up the lid and turn it counter-clockwise until it gears with a clamping sound.

5.  Put the pressure discharging in its position. Then set it to “seal” point. Be sure that the floating valve is in down position.

6.  Press the menu button (press “rice” for rice cooking, for example) and the indicator lights up.

7.  For function menu, please refer to cooking instructions to set proper pressure keeping time. Press the “optional pressure holding time” button and the timer increases by 10 min. The maximum time setting is 99 minutes and after that, it begins a new cycle (optional pressure holding time denotes the time pressure sustained after it gets to desired working pressure).

8. After time setting, press “function menu” button. The timing indicator will flash and the “function menu” indicator lights up. If you have pre-set the time, the timer will decrease each time by 10 min. When the countdown ends, the display shows “00”, the timing indicator goes out and the cooking begins.

9. In case of no time pre-set, press the menu button or “function menu” button, the indicator will light up,
   denoting the start of the cooking.

10. Pressure holding process begins when pressure inside is high enough:

    •  If you press any menu button on the panel, the display will show “P000”.

    •  If you press the “function menu button”, the display will show “P000”. (00 denotes pressure holding time; for example, if you se 15 minutes, the display will show 0P15), and the pressure holding time decreases in 1 minute internal.

    • When pressurizing is over, it will deliver three rings, the working indicator will go out and the display shows “0000”, reminding the end of cooking and start of keep

    • warm process. The “keep warm” indicator flashes if pressure inside is high; the indicator just remains on if the pressure is low.
      Press “keep warm/cancel” button to cancel parameter setting or current working status.

    • Press once more time to cancel the “keep warm” status and the indicator goes out.

11. “Keep warm” indicator flickers to indicate the food is ready. The display shows “bb”. Press “keep warm/cancel” to cancel and you can take food now.

    •  Set the pressure limiting air relief valve to “exhaust” and discharge the air until the float controlled valve drops.

12.  When the fluid food such as congee is cooked, the pressure discharging valve cannot be taken up immediately after the “keep “arm” indicator begins to flash. What until the floating valve is no longer floating or the food may puff off with the steam. A wet towel on the lid can speed up the cooling.

13.  It is recommended that the steam is discharged when the indicator is on without flashing. The pressure is much lower at this time.

14.  Unplug the power cable.

15.  Hold and turn the handle clockwise until the lid comes to the clamping position and take up the lid.

CLEANING

•  Unplug the power cable prior to cleaning.
•  Brush the bottom of the cooker with a mop. Never steep the cooker into water or spray water on it.
•  Take off and clean the water collector and wash it with a wet towel.
•  Clean the inner side of the cooker, including the sealant washer, pressure discharging valve, antiblocking case, steam relief pipe, floating valve with water and clean it with a mop.
•  Use a sponge or nonmetal soft brush to clean the inner take and clean it with a mop.
•  Clean the seat of pressure limiting air relief valve and water drain hole with a small brush, so that water can be freely discharged

No.| Symptom| Diagnosis| Solution|
---|---|---|---|---
1| Difficult to cover| The sealant washer is not well placed.| Place the seal washer in a proper position.
Floating valve stuck on the bar.| Push the bar slightly
2| Difficult to

uncover

| The floating valve is not down in place.| Slightly press the valve with chopsticks.
3| Steam| Sealant Washer is not in.| Put in the sealant washer
 | leaking| Dirty in the sealant washer| Clean the sealant washer.
---|---|---|---
Damage sealant washer| Replace the sealant washer.
The lid is not well fixed.| Fix the lid in line with standard.
4| Floating valve leaking| Dirt in the sealant washer, or floating valve.| Cleaning the sealant washer of the floating valve.
Damage to the sealant washer| Replace the sealant washer.
5| The floating valve cannot rise| Insufficient food in the cooker| Add food and water the line with directions.
Leakage in the lid or pressure displaying| Send it to the maintenance shop.

Disposal of old electrical appliances.

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

DECLARATION OF CONFORMITY:

This device complies with the requirements of the Low Voltage Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU.

References

• Orbegozo Electrodomésticos | Todo para tu hogar y cocina

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>