Goldair GPCV330 2000W Electronic Panel Heater with WiFi Instruction Manual

: June 5, 2024
: GOLDAIR

Table of Contents

Goldair GPCV330 2000W Electronic Panel Heater with WiFi
General Care and Safety Guide
CONTACTS
CUSTOMER SUPPORT
Components
Assembly
Assembly and Installation
Operating Your Heater
Operating Your Heater
WiFi Downloading and Setting up APP
Pairing APP to Device
Operating Your Heater
CARE AND CLEANING
Three Year Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Goldair GPCV330 2000W Electronic Panel Heater with WiFi

General Care and Safety Guide

YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.

CAUTION

In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety
Children should be supervised to ensure that they do not play with the appliance
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

WARNING: You must not cover this appliance. Covering this appliance presents a fire risk and will activate the safety fuse; permanently disabling the unit.

Do not use this appliance in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant supervision is provided.
To reduce the risk of fire, keep textiles, curtains, or any flammable material a minimum distance of 1 meter from the air outlet.
Use only the voltage specified on the rating label of the appliance.
Keep all objects at least 1 meter from the front, sides, and rear of the appliance.
This appliance is intended for household use only and not for commercial or industrial use.
Indoor use only.
Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock, or injury.
Do not use the appliance if it has been dropped or damaged. The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
Never use the appliance to dry clothes.
Always unplug appliances when not in use.
When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
Do not use it if there are visible signs of damage to the appliance.
Do not connect the appliance to the mains supply until completely assembled and adjusted.
Ensure hands are dry before handling the plug or main unit.
Ensure the appliance is on a flat, stable, heat-resistant surface.
Do not operate with the cord set coiled up as a heat build-up is likely, which could be sufficient to become a hazard.
Carry out regular checks of the supply cord to ensure no damage is evident
Do not operate this appliance with a damaged cord, or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Take to a qualified electrical person for examination,
electrical service or repair.
Do not twist, kink, or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
It is recommended that this appliance is plugged directly into the wall socket. Power boards are not rated to supply power to high-wattage appliances.
A correctly specified, an undamaged extension cord may be used with this appliance provided it is used in a safe manner.
Do not remove the plug from the power socket until the appliance has been switched off.
Do not remove the plug from the power socket by pulling the cord, always grip the plug
Do not place the cord under the carpet or cover it with rugs or furniture. Arrange the cord so it cannot be tripped over.
Don’t place appliances on bedding or on thick & long carpet where the openings may get blocked.Switch off and use the handle provided when moving
Do not place appliance close to a radiant heat source
Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
Do not sit on the appliance.
Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
Do not operate in areas where petrol, paint, or other flammable liquids are used or stored.
Do not use this appliance in the immediate surroundings of a bath, a shower, or a swimming pool or other liquids.
The appliance must not be immersed in any liquids
There are no user-serviceable parts installed in the unit
Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards
This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc are stored
If your appliance does not work or is not working properly, contact the place of purchase or the Customer Services Team

CONTACTS

Model No: GPCV330
Supply: 220-240VAC 50/60Hz
Wattage: 2000W
CLASSIC
Approval: TUVO22337EA
QC Passed: PO#-WwYY
MADE IN CHINA

CUSTOMER SUPPORT

NEW ZEALAND PH: 0800 232 633
AUSTRALIA PH: 1300 465 324

Components

Before using this appliance, it must either be wall mounted or have the feet fitted This appliance has been supplied with 1-way screws’ for permanent installation of the feet This is a safety requirement for the New Zealand and Australian market

Goldair-GPCV330-2000W-Electronic-Panel-Heater-with-WiFi-
FIG-1

SCREW PACK
8 x SCREWS including 2 x ONE
WAY SCREWS TO ATTACH
FEET
WALL MOUNTING
4 x LONG SCREWS
4 x WALL PLUGS

Assembly

Before using this appliance, it must either be wall mounted or have the feet fitted The screw pack to attach the feet to your appliance will be taped to either one of the feet for your appliance, or taped to the plug.

FREE STANDING

Ensure the appliance is unplugged and power switches are off
Carefully turn the Main Body upside down on a scratch-free and stable surface Be careful to prevent damage to the cosmetic finish or your floor surfacing
Align the screw hole on the Feet Bracket with the screw hole on the base of the appliance
Attach feet with the screws provided and ensure the bracket sits firmly in place (do not over-tighten)
Set appliance upright and plug into a standard 240 volts AC electrical outlet.

Assembly and Installation

NOTE: Your Goldair Panel Heater should be installed with at least 100mm clearance from the floor and any other surrounding parts including other appliances, side walls, and soft furnishings. There must be at least 1m clearance from the top of the heater to ceilings or shelves.

WARNING: Do not run the power cord behind the heater.

WALL-MOUNTED HEATERS ARE ONLY TO BE MOUNTED ON WALLS THAT COMPLY WITH CURRENT AS/NZS SPECIFICATIONS & BUILDING REGULATIONS

WALL MOUNTED

Make sure the appliance is unplugged and power switches are off
Position the panel appliance within one meter of a wall socket Do not mount in front of or below the wall socket Ensure there is at least 100 mm clearance on all sides of the appliance
Assemble the bracket with the screws provided see image 1
Position the mounting screws on the wall per below mounting guide and check they are horizontal with a spirit level Ensure the bottom of the heater is at least 100 mm from the floor and drill holes as required Fix the bracket to the wall
Slot the back of the appliance onto the mounting screws The bottom mount is on there to keep the heater at the correct distance from the wall You do not need to put a screw in the bottom mount
Plug the appliance into a standard 240 volts AC electrical outlet.

Goldair-GPCV330-2000W-Electronic-Panel-Heater-with-WiFi-
FIG-32

Operating Your Heater

Always choose a safe location for the heater, keeping in mind the safety precautions outlined Ensure all packaging has been removed from the unit before use please follow the below instructions.

In order to avoid overheating or fire, do not cover the heater.
Keep all objects at least 1 meter from the front, sides, and rear of the appliance
Do not use this heater with a programmer, separate the timer, remote control system, or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
Never leave this heater unattended when in use
Ensure heater is on a flat, stable, heat-resistant surface Once the heater is in a safe operating position and all switches are in the off position, insert the power plug into the mains outlet and switch on

CAUTION: Ensure the power cord is not tight because if pulled it may partially pull the plug from the socket. A partially inserted plug will overheat the plug and socket and could result in a fire.

Note: When the appliance is turned on for the first time, it may release a slight odor or smoke This odor or smoke is a normal occurrence caused by the initial heating of the internal heating elements and should not occur again.

Operating Your Heater

HEATER CONTROL PANEL

Display
Temperature
Heat Setting
Timer
Power Ensure

Ensure the power switch is in the OFF position before plugging the unit in

WARNING: Do not use this heater until it is fully assembled according to the free-standing or wall mounting instructions within this manual

OPERATION

Plug in the unit and switch on the main power switch, The power indicator will light up
Press the Power button 5 to turn the unit on The current room temperature will be displayed.

HEAT SETTING

Press the Heat Setting button 3 to change between Low and High power

SETTING THE TEMPERATURE

Press the Temperature button 2 to select the desired temperature from 15 35 C Each press of the button will increase the temperature by 1 degree until it reaches 35 degrees and then it will start at 15 degrees again After a few seconds the display will return to showing the current room temperature

SETTING THE TIMER

Press the Timer button 4 to set the timer The set time is displayed Press the Timer button to increase the timer in one-hour increments The timer has a range of to 24 hours The unit will turn off once the timer completes its countdown.

WiFi Downloading and Setting up APP

This APP is supported only on 2.4GHz Wi-Fi channels. Please ensure your phone is 2.4GHz capable

Note this device will only work within your home WIFI system.
This does not operate on 3G or 4G internet connections.
You will need a connection to your home Wi-Fi.

Download the Goldair mobile APP

Open the APP Store or Google Play on your mobile phone.
Open ‘Search’ and enter ‘Goldair’
Click ‘GET’ and begin to download and install.

Once downloaded to your phone open the APP

Tap REGISTER near the bottom of the screen.
Read and agree to the Privacy Policy.
Add your email address.
Tap ‘Obtain verification

You will then receive an email with a verification code.

Enter the verification code from your email.
Create a password.
Then tap confirm.

If you haven’t received a verification code via email, tap the resend button, and when the verification code is received follow above steps. Your APP is now registered and ready for pairing to your device.

Pairing APP to Device

Details for pairing, this heater to the Goldair App can be found at the below website link. Either scan the QR code below or enter the website into your browser

Goldair-GPCV330-2000W-Electronic-Panel-Heater-with-WiFi-
FIG-8

Pairing Mode

To connect to the Goldair app you must ensure that your device is in pairing mode which is where the Wifi Icon is flashing. Most products will be in pairing mode after switching the device on but if it is not:

Put the device on STAND BY mode (ON at the wall but the device is OFF)
Hold down the heat setting button for around 5 seconds or until the Wifi icon begins to flash.

Operating Your Heater

SAFETY DEVICES
This appliance has two protection devices

Resettable Thermal Link this will automatically disconnect the power to the appliance at a pre-set overheat temperature After cooling down it will reset and power on again If this occurs, investigate what is causing the appliance to overheat

CAUTION: The heater generates heat during use Precautions must be taken to prevent the risk of burns, scalds, fires, or other damage to persons

CARE AND CLEANING

The heater requires regular cleaning to ensure trouble-free operation
Unplug the heater from the mains supply before cleaning
Ensure that the heater has been allowed to cool down completely before cleaning
The common cause of overheating is deposits of dust or fluff in the appliance
Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills
Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt
Never use solutions such as petrol, thinners, or polishing agents
Ensure the heater is dry before plugging back into the mains supply
Do not attempt to dismantle the appliance
There are no user-serviceable parts For service or repair, contact an authorized electrical service technician.

Three Year Warranty

Thank you for purchasing this Goldair Select product Your product is warranted against faults and manufactured when used in normal domestic use for a period of three years In nondomestic use Goldair limits the voluntary warranty to three months Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone other than a qualified electrical service technician PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTYThe benefits given to you by this warranty are in addition to other rights and remedies available to you under the law in relation to the goods or services to which this warranty relates In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure In In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act 1993.

Goldair New Zealand