HIMEDIA Q5S 4K HDR Smart TV Box User Guide
- June 5, 2024
- HIMEDIA
Table of Contents
HIMEDIA Q5S 4K HDR Smart TV Box
Remote Control
Learning function instruction for Five Grey TV buttons
- Press the [SET| button for 3 seconds until the red LED light stays lit up. Now, this remote is in Learning Mode. It would quit Learning Mode automatically after 15 seconds if no button clicked.
- Place the TV remote with this Box remote head to head, and keep the distance at 1 inch.
- Click the Power button on Box remote (designed for TV), red LED light would start to flash; now click the power button on the TV remote. The red LED light would quickly flash 3 times, that means Duo as Deen successfully mapped.
- If you want to map other buttons from the TV remote to Box remote, please repeat step 3.
- Click JSEll Dutton to quit this Box remote learning mode.
Connecting to the Power Supply
- Connect the barrel connector of the AC adapter to the SMART TV BOX’s DC IN.
- Connect the plug of the AC adapter to a power outlet.
Audio and Video Connections
Connecting to your TV via HDMI
- Connect the HDMI cable to the SMART TV BOX’s HDMI output.
- Connect the other end of the HDMI cable to an HDMI input on your TV.
- Go to Settings -Playback-HDMI Output-Auto
Goto Settings-Playback-SPDIF 0utput-LPCM
Go to Settings-Playback-HBR Degrade Output-RAW5.1
Connecting to Home Theater Receiver or Sound System(5.1CH)
- Connect the HDMI cable to the SMART TV BOX’s HDMI output and connect the other end of the HDMI cable to an HDMI input on your TV.
- Connect the coaxial optical cable to the SMART TV BOX’s digital audio output and connect the other end of the coaxial optical cable to a digital audio input on the home theater receiver or sound system.
- Go to SettingsPlayBack -HDMI Output-LPCM
Go to Settings PlayBackSPDIF Output RAW
Go to Settings PlayBack HBR Degrade Output RAM5.1
Connecting to Home Theater Receiver or Sound System(7.1CH)
- Connect the HDMI cable to the SMART TV BOX’s HDMI output and connect the other end of the HDMI cable to an HDMI input on the home theater receiver or sound system.
- Connect the second HDMI cable to the HDMI output on the home theater receiver or sound system and connect the other end of the second HDMI cable to an HDMI input on your TV.
- Go to Settings-Playback-HDMI Output-RAW
Go to Settings-Playback-SPDIF Output-RAW
Go to Settings-Playback–HBR Degrade Output–RAW7.1
Network Connections
Wired
- Connect the network cable to the SMART TV BOX’s LAN port and connect the other end of the network cable to an available port on a LAN switch, router or networked wall plate.
- Go to Settings Network >Ethernet to adjust wired settings.
- Please turn off Wi-Fi when using Ethernet.
Wireless
- Go to Settings NetworkWi-Fi to adjust wireless settings.
- Please turn off Ethernet when using Wi-Fi.
Getting Started
How to put on or remove apps from the home page?
- PUT ON: Press the “+” button on the Home page-> Select the apps you want to put-> Press the “OK” key on the remote control-> Press the “Complete” button to finish put on
- Remove: Press “My Apps” > Select the apps you want to remove from the Home page-> Press “OK key on the remote control-> Press the “Cancel” button to remove
How to set one apps as default start one or Close it?
- Press “My Apps” -> Select the apps you want to default start-> Press the “Menu” key on the remote control-> Press the “Default Start” button Same way going here to “Close Start” or “Uninstall” one apps
- Remind: You could go to Google Play or any other third-party stores to download all of your favorite android based applications and install them onto the Himedia box.
Firmware Upgrade
Firmware Upgrade by Recovery Mode(user data will be cleared)
- Download a new firmware and place the firmware onto the R00T directory of a USB drive.
- Plug the USB drive into an empty USB HOST on the SMART TV BOX.
- With the SMART TV BOX turned off, use a paper clip or pen point to press and hold the small pinhole restore button on the SMART TV BOX
- While pressing the restore button, turn on the SMART TV BOX. Continue to hold the restore button for 5 more seconds, then release it.
- The SMART TV BOX ill begin upgrading the firmware from the USB drive.
- Wait for the SMART TV BOX to complete the upgrade. Please be patient as it may take around 5 minutes to complete.
- When finished, The SMART TV BOX will auto reboot.
Fireware Upgrade from Settings Menu(user data will not be cleared)
- Download a new firmware and place the firmware onto the R0OT directory of a USB drive.
- Plug the USB drive into an empty USB HOST on the SMART TV BOX.
- Go to Settings Upgrade Local upgrade to select/click the letter of the USB drive.
- The SMART TV BOX will begin upgrading the firmware from the USB drive.
- Wait for the SMART TV BOX to complete the upgrade. Please be patient as it may take around 5 minutes to complete.
- When finished, The SMART TV BOX will auto reboot.
FCC Statement
FCC ID: RRJQ5S FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. This device and its antenna(s) must not be co-located or operating
in conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator and your body: Use only the supplied antenna. In the event of any contradiction between this quick guide and the actual functions of a specific model, the actual functions shall prevail.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>