THOMSON Computer Speakers User Manual

THOMSON Computer Speakers

Sound installation mode

• Keep the product dry and do not place it in humid places to avoid affecting the internal Circuit of the product.
• Do not place the product in a place exposed to sunlight or high temperatures. High temperatures shorten the life of electronic components and distort some plastic parts
• Do not put the product in too cold a place, so as not to damage the internal circuit board
• Do not attempt to disassemble the product, especially for non-professionals. which may damage the product.
• Do not drop, strong vibration hits the product with a hard body tO avoid damage to the internal circuitry.
• Do not use strong chemicals or cleaner to clean the speaker
• Do not scratch the product surface with a sharp to avoid damage to the shell and affecting the appearance.
• Do not use a power supply with high voltage to avoid damage to the product or possible danger. And automatically terminate product warranty service.

Connection Method

PC Connection Method

Tips: All lines need to be connected at the same time to use, connected to the back of the computer sound quality is better (not recommended to insert the host in front)

Cell phone/MP3/MP4/Tablet Connection Method

Tip: Must use 5V 600 mA or higher charging head

Consumers who use the power adapter for power supply should purchase one that meets the CCC certification and the standard requirements.

Power Supply (this machine has no internal batteries and needs to be

plugged in to use)

• Insert the USB plug of this machine into the USB socket of the computer or the USB
• The SOcket of the mobile phone charger (DC5V— 600mA or higher) (1000mA or higher sound quality is better).

Turn On

• After powering on, the speaker will automatically turn on. after that, the speaker will sound

• Audio input mode” beep, the light on the speaker will light up.

• Microphone hole: In AUX mode., it can be plugged into a microphone (the rod audio had on speaker needs to be plugged into the red hole of the computer).

• Audio output hole: In the AUX node, it can be plugged into audio devices, such as headphones, speakers, etc. (the green audio head on the speaker needs to be plugged into the green hole on the computer).

• Multi-function knob: Clockwise rotation to increase the volume, counterclockwise
  rotation to reduce the volume, short press the knob to switch between AUX in input and Bluetooth, and long press for power on /off.

• Indicator light: Light up after pOwer on. After entering Bluetooth mode, it is fast flashing

• when waiting for Bluetooth connection, and slow flashing when Bluetooth connection is Successful.

Bluetooth Connection Method

1. After the “Audio input mode” beep. press the knob to switch to Bluetooth mode, open the phone/tablet and other Bluetooth devices can be connected to the speaker at any time. Cell phone connection method: open the phone Bluet0oth settings (different phone brands, Bluetooth open in different ways) into the search, match the device “D333. After the connection pairing. the initial pairing password is “O000”. After a successful Connection, the speaker will emit a “Bluetooth Connection success beep.
2. Due to different brands of cell phones, the Bluetooth version is not the same, therefore the search and pairing time will be different. t takes about a minute under normal circumstances.

AUX(AUX in)

This machine has the function of amplifying the output of external audio sources (such as cell phones, computers, tablets, MP3 players, CD players, Walkman, radio, etc.). Insert the 3.5 audio plug (round) of this large speaker into the headphone output socket of the Computer. cell phone, or tablet, and then insert the USB power supply plug of this machine into the USB socket(1000mA or higher with better sound quality) of the computer or cell phone charger (DC5V — 600mA or higher). After powering on, the speaker will sound source input mode” beep. and it can be played.

Solutions to Common Problems

Multiple connection pairing is unsuccessful:

1. Restart and pairing.
2. Turn off other Bluetooth devices because their interference causes searching difficulty.

Sound is low or distorted:

1. If the Charger current is insufficient, replace another charger.
2. Source volume is small, adjust the volume to appropriate.

Music in Blueloolh mode is interrupted:

1. Check if The effective connection distance of the speaker is exceeded, or if there is an obstacle between the speaker and the mobile phone

Note: This machine does not have a Bluetooth calling function. When playing music with Bucktooth on your mobile phone, you can answer a call directly With your Mobic phone.

Product Specifications

Note: for the different paring devices and using situations, the Connection distance is different.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital] device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interterence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oft and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver iS is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 ot the FCC Rules. Operation is subject to thhe following two conditions: (1) the device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

• This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

This product has been manufactured and sold under the responsibility of MAXIALENT INDUSTRIAL Limited. Thomson and the Thomson logo are trademarks used under license by MAXTALENT INDUSTRIAL Limited. Further information at www.maxtdigital.com/THOMSON. Any other product, service, company, trade, or product name and logo referenced herein are the property of their respective owners.

• Manufacturer: Shenzhen Qiuyu Electronic Co. Ltd
• Website: www.maxtdigital.com/THOMSON
• Support: sorvicc@maxtdigital.com
• Made in China
• V1.0

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>