AXIS T8154 60 W SFP Midspan Installation Guide

AXIS T8154 60 W SFP Midspan
Installation Guide

T8154 60 W SFP Midspan

Legal considerations
Video and audio surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.
Liability
Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at www.axis.com/patent.htm and one or more additional patents or pending patent applications in the US and other countries.
Equipment modifications
This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user- serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.
Trademark acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC, and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies.

Regulatory information
Europe

**** This product complies with the applicable CE marking directives and harmonized standards:

• Electromagnetic Compatibility (EMC) Directive 2014/30/EU. See Electromagnetic compatibility (EMC) on page 4.
• Low Voltage (LVD) Directive 2014/35/EU. See Safety on page 5.
• Restrictions of Hazardous Substances
  (RoHS) Directive 2011/65/EU. See Disposal and recycling on page 5.
  A copy of the original declaration of conformity may be obtained from Axis Communications AB. See Contact information on page 5.

Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill applicable standards for:

• Radio frequency emission when installed according to the instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.

USA
This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The product shall be connected using a shielded network cable (STP) that is properly grounded.

Canada
This digital apparatus complies with CAN ICES-3 (Class A). The product shall be connected using a shielded network cable (STP) that is properly grounded.
Europe
This digital equipment fulfills the requirements for RF emission according to the Class A limit of EN 55022. The product shall be connected using a shielded network cable (STP) that is properly grounded. Notice! This is a Class A product. In a domestic environment, this product may cause RF interference, in which case the user may be required to take adequate measures.
This digital equipment fulfills the requirements for RF emission according to the Class A limit of EN 55032. The product shall be connected using a shielded network cable (STP) that is properly grounded. Notice! This is a Class A product. In a domestic environment, this product may cause RF interference, in which case the user may be required to take adequate measures.
This product fulfills the requirements for emission and immunity according to EN 50121-4 and IEC 62236-4 railway applications.
This product fulfills the requirements for immunity according to EN 61000-6-1 in residential, commercial, and light-industrial environments.
This product fulfills the requirements for immunity according to EN 61000-6-2 industrial environments.
This product fulfills the requirements for immunity according to EN 55024 office and commercial environments.
Australia/New Zealand
This digital equipment fulfills the requirements for RF emission according to the Class A limit of AS/NZS CISPR 22. The product shall be connected using a shielded network cable (STP) that is properly grounded. Notice! This is a Class A product. In a domestic environment, this product may cause RF interference, in which case the user may be required to take adequate measures.

Safety
This product complies with IEC/EN/UL 60950-1, Safety of Information Technology Equipment. If its connecting cables are routed outdoors, the product shall be grounded either through a shielded network cable (STP) or another appropriate method.
Disposal and recycling
When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste.
Europe

**** This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly.
This product complies with the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
China

This product complies with the requirements of SJ/T 11364-2014, Marking for the restriction of hazardous substances in electrical and electronic products.

Contact information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com

Warranty information
For information about Axis’ product warranty and thereto related information, go to www.axis.com/warranty/

Support
Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through
the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

• download user documentation and software updates
• find answers to resolved problems in the FAQ database. Search by product, category, or phrase
• report problems to Axis support staff by logging in to your private support area
• chat with Axis support staff
• visit Axis Support at www.axis.com/techsup/

Learn more!
Visit Axis learning center www.axis.com/academy/ for useful training, webinars, tutorials, and guides.

Safety information

Read through this Installation Guide carefully before installing the product.
Keep the Installation Guide for future reference.

Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates a situation which, if not avoided, could result in damage to property.

Other message levels

Important
Indicates significant information which is essential for the product to function correctly.
Note
Indicates useful information which helps in getting the most out of the product.

Safety instructions

WARNING
The Axis product shall be installed by a trained professional and in compliance with local laws and regulations.

NOTICE

• The Axis product shall be used in compliance with local laws and regulations.
• The product shall be grounded either through a shielded network cable (STP) or another appropriate method.
• To use the Axis product outdoors, or in similar environments, it shall be installed in approved outdoor housing.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to shocks or heavy pressure.
• Avoid exposing the Axis product to vibration.
• Do not install the product on unstable poles, brackets, surfaces, or walls.
• Do not install the product on vibrating poles, brackets, surfaces, or walls.
• Use only applicable tools when installing the Axis product.
• Using excessive force with power tools could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners.
• Use a clean cloth dampened with pure water for cleaning.
• Use only accessories that comply with the technical specification of the product. These can be provided by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.

Transportation
NOTICE

• When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.

Package contents

• AXIS T8154 60 W SFP Midspan
• Power cable
• Printed materials
  – Installation Guide (this document)

Hardware overview

For specifications of the hardware components, see Technical specifications on page 15.

1. Port LED
2. Power LED
3. SFP slot for optical fibre SFP module (SFP module not included)
4. RJ45 and PoE port
5. RJ45 port
6. Power connector (100-240 VAC input)
7. Power cable

How to install the product

1. Connect the midspan to the network switch in one of the alternative ways:
   NOTICE
   Use a shielded network cable (STP) CAT5 or higher.
   – A: via an Ethernet RJ45 cable that is connected to the midspan’s RJ45 port (DATA IN).
   – B: via an optical fibre cable attached to an SFP module that is connected to the midspan’s SFP slot (DATA IN).

2. Connect the midspan (DATA PWR OUT) to the camera’s RJ45 port using an Ethernet RJ45 cable.

3. Connect the midspan to a grounded (earthed) mains power outlet (100–240 VAC) using the supplied power cable.

4. Verify that the midspan LEDs indicate the correct statuses. See LED indicators on page 15.

Further information

• For the latest version of this document, see www.axis.com
• For useful online trainings and webinars, see www.axis.com/academy

Optional accessories
For a complete list of available accessories for this product, go to www.axis.com
Warranty information
For information about Axis’ product warranty and thereto related information, go to www.axis.com/warranty/

Technical specifications

You can find the latest version of the technical specifications at www.axis.com
LED indicators

succeeded and the port is providing load
Green, blinking| No remote device is connected or the PoE load has dropped below the minimum level
Red, static| A remote device is connected but PoE negotiation has failed or the port is overloaded or shorted

Operating conditions

(non-condensing)
Operating up to 30 W| -10 °C to 55 °C
(14 °F to 131 °F)| Max 90% RH
(non-condensing)

Power consumption

Maximum available output power
(High Power over Ethernet)| 60 W
Nominal output voltage| 56 V DC

Ethernet Interface

Input (DATA IN)
Ethernet 10/100/1000Base-T| RJ45 female socket
---|---
Input (DATA IN)
SFP 100/1000Base-T| SFP slot
Output (DATA & POWER OUT)
Ethernet 10/100/1000Base-T, 55 V DC| RJ45 female socket, with DC voltage on wire pairs 1–2, 3–6, 4–5 and 7–8

Troubleshooting

cable and check the power LED indicator status during the power-up sequence.
Verify that the power inlet voltage is between 100-240 V AC.
Verify that the power inlet cable is intact/functional.
The remote device connected to the midspan does not power up| Verify that the remote device is designed for PoE operation.
Verify that the remote device is connected to the midspan’s DATA PWR OUT port using a standard STP CATS or higher, straight-wired network cable with four pairs.
If an external power splitter is in use, verify that it works.
Verify that there is no short circuit on any of the twisted pair cables or RJ45 connectors.
If possible, connect the remote device to different midspan.
Symptom| Corrective action
---|---
The remote device connected to the midspan powers up but there is no data link| If using an Ethernet RJ45 cable, verify that it is a standard STP CATS or higher, straight-wired network cable with four pairs.
If using an Ethernet RJ45 cable, verify that its length between the network switch and the remote device is less than 100 m (330 ft).
If using an optical fibre cable, verify that the cable and the SFP module are of the correct type and that the cable is intact/functional.
If possible connect the remote device to different midspan.

Installation Guide
AXIS T8154 60 W SFP Midspan
© 2017 – 2021 Axis Communications AB
Ver. M2.2
Date: July 2021
Part No. 1596169

References

• Axis Communications - Leader in network cameras and other IP networking solutions | Axis Communications
• Technical support, Axis products | Axis Communications
• Warranty | Axis Communications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>