BaByliss G804E Hair Removal Machine User Manual

BaByliss G804E Hair Removal Machine

Please read the following instructions carefully before using the appliance.

PRODUCT FEATURES

• Depilation head with optimized capture system (1)
• 40 tweezers – optimal effectiveness on relatively short hair (0.5 mm)
• Precision head 16 tweezers: for ultra-precise depilation of the armpits and bikini line (2)
• 1 pedicure head: 2 anti-callous rollers (3)
• 2 speeds – speed I for gentle epilation, speed II for ultra-effective epilation (4)
• Removable heads – easy maintenance – Washable in water (5)
• Mains operated
• Protective cover, cleaning brush, pouch, adapter

USE ON THE MAINS
Plug the appliance into the mains and set to the position I.
IMPORTANT! Only use the adapter that is supplied with the ap-pliance.

CHANGING THE HEAD

• Press the button on the back of the appliance to release the head (Fig. 1).
• Fasten the desired head by pressing the appliance base until it clicks into place.

EPILATION

Epilation of the legs:

1. Switch the appliance on and choose speed I or II.
2. Keep the appliance perpendicular to the surface to be epilated.
3. Always use both hands: with one hand, carefully pull the skin smooth, then using the other to move the appliance. Do not make circular movements or go backwards and forwards.
   Move the epilator slowly. Please note: if the appliance is pressed too firmly against the skin, it may be slowed and less effective.

Epilation of sensitive areas:
We recommend using the precision head to depilate sensitive areas. Its design intelligently reduces the number of tweezers for more precise depilation.
If hair is long (more than 1 cm), we recommend cutting it with scissors before using the epilator.

1. To epilate armpits, move the epilator from bottom to top, then, the-reafter, from top to bottom.
2. To epilate the bikini line, carefully pull the skin taut, moving the ap-pliance from the outside inwards.

COMPLETE ANTI-CALLOUS TREATMENT

With its two rollers, the pedicure kit eliminates all callouses and dead skin effectively, for the long-lasting beauty of perfect feet.

Before use

• Check that the skin of the feet is perfectly clean and slightly damp. Do not apply cream or moisturiser.

• Check that the roller is correctly positioned on the pedicure head Use
  Advice for use
  For perfect results, use the appliance on slightly damp skin. Do not use the appliance right after bathing.
  Treatment takes place in 2 steps:
  Step 1: Exfoliating roller (large grain) associated with quick speed to effectively eliminate callouses with long-lasting results.
  Step 2: Gentle finishing roller (fine grain) and slow speed for ultra- soft, extra supple skin.

• Switch the appliance on.

• Gentle roll over the soles of the feet to gradually remove callouses and dead skin.
  Note:

• If the appliance is pressed too firmly against the skin, it may be slowed and less effective.

• Do not spend more than 3-4 seconds continuously on any one area.

• Stop use if the skin becomes irritated or inflamed.
  After use
  • Rinse feet to eliminate any residual dead skin. Dry feet thoroughly. Apply a moisturizing cream to the feet and massage feet for as long as necessary to allow the cream to penetrate.
  Changing the roller
  Only use BaByliss original exfoliating rollers to replace it. Change the exfoliating roller when the appliance appears to be less effective. Use the side grips to remove the cover (Fig.2). Release the roller by lowering the right side of the device fixing mechanism (Fig.3). Remove the roller (Fig.4). Position the new roller from the left (the longest metal stem) (Fig.5). Fasten into place, lifting the right side of the device (Fig.6). Check that the two stems are correctly inserted into the relevant holes. Replace the cover (Fig.7).

IMPORTANT

• Only use the epilator for epilation, in accordance with the instructions for use.
• Do not epilate on open wounds, cuts, burns, warts, moles, sunburnt skin or varicose veins. Do not use in the event of skin irritation or infection, like psoriasis or eczema on the legs.
• • Do not use to epilate the face, hair on your head, chest, eyebrows, eyelashes or genitalia. The appliance can only be used on the legs, bikini line, arms and armpits.
• Do not use the pedicure kit on open wounds, cuts, warts or moles. Do not use in the event of skin irritation or infection (psoriasis or eczema).

MAINTENANCE

• Clean with a little brush between the discs after each epilation.
• We recommend regular disinfection of the appliance head and accessories, using alcohol.
• For proper hygiene, the epilation head can be removed and easily rinsed under running water. Do not immerse the appliance completely in water.
• If you need to clean the appliance shell, use a cloth soaked with a gentle detergent.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>