EPSON TM-P80II POS Printer User Manual

EPSON TM-P80II POS Printer User Manual

FCC Compliance Statement for Users in the USA

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC/ISED Compliance Statement

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This device complies with part 15 of FCC Rules and innovation, Sciences and Economic Development Canada’s licence exempt RSSs. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research.
TM-P80II (M382A/M382C) has been tested and found to comply with FCC/I4&% radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the I4&% radio frequency (RF) Exposure rules.

Innovation, Science and Economic Development Canada (ISED) Notices

The device for operation in the band 5150-5350 MHz is for indoor use only.

Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Supplier’s Declaration of Conformity
According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers:

We: EPSON AMERICA, INC.
Located at:
3131 Katella Ave.
Los Alamitos, CA 90720
Telephone: 562-981-3840

Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.906 Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trade Name: EPSON
Type of Product: Thermal Printer
Model: M382A/M382C

Simplified EU Declaration of Conformity:

Hereby, Seiko Epson Corporation declares that this equipment Model: M382A/ M382C is in compliance with directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address.
https://www.epson.eu/conformity

Radio Equipment Information:

This product intentionally emit radio wave described as follows.

1. frequency band in which the radio equipment operates; see *1
2. maximum radio-frequency power transmitted in the frequency band in which the radio equipment operates; see *2

5150 – 5350 MHz
5470 – 5725 MHz| 20 dBm (EIRP)
23 dBm (EIRP)
30 dBm (EIRP)

Indication of the manufacturer and the importer in accordance with requirements of directive 2011/65/EU (RoHS)

Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502, Japan
Web site: https://www.epson.com/
Importer: EPSON EUROPE B.V.
Address: Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA
Amsterdam Zuidoost The Netherlands
Web site: https://www.epson.eu/

For Users in the United Kingdom

Hereby, Seiko Epson Corporation declares that the radio equipment type supplied herein is in compliance with the relevant statutory requirements.
The full text of the declaration of conformity is available at the following internet address: https://www.epson.eu/conformity

The following standards are applied only to the printers that are so labeled.(EMC is tested using the Epson power supplies.)
Europe: CE Marking
North America: FCC Class B, CAN ICES-3 (B)/NMB-3 (B)
Oceania: Radio communications (Electromagnetic Compatibility) Standard , Class B

References

• Epson Global Portal

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>