Skullcandy Sesh ANC True Wireless Earbuds User Guide
- June 5, 2024
- Skullcandy
Table of Contents
- Download the Skullcandy App
- Auto Power – On/Off
- Power-On
- Power-Off
- Pairing Mode
- Pair New Device
- Play/Pause Answer/End
- Volume Up
- Volume Down
- Track Forward ****
- Track Back
- Activate Voice Assistant
- Noise Cancellation
- Stay-Aware Mode
- EQSwitch
- Re-Sync Earbuds
- Find With Tile™
- Clear Paired Device
- Charge Earbuds
- Charge the Case
- FCC Compliance Statement
- 1 YEAR GLOBAL WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Skullcandy Sesh ANC True Wireless Earbuds
Download the Skullcandy App
Auto Power – On/Off
Power-On
Both Earbuds
Power-Off
Both Earbuds
Pairing Mode
Left Earbud or Right Earbud
*On Mode
Pair New Device
“Sesh ANG”
PalrNewDevlce
Play/Pause Answer/End
Left Earbud or Right Earbud *On Mode
Play/Pause or Answer/End
Volume Up
Right Earbud
Volume Up
Volume +
Volume Down
Left Earbud
Volume Down
Volume –
Track Forward ****
Right Side
Track Forward
Track Back
Left Side
Activate Voice Assistant
Left Earbud or Right Earbud
Activate voice .Assistant
Noise Cancellation
Left Earbud or Righit Earbud
*Stereo Mode
Active Noise Canceling (ANC) Qn/Off
Stay-Aware Mode
Left Earbud or Right Earbud
*Stereo Mode
Ambient mode
EQSwitch
*In App Only*
Skullcandy App Required**
Change equalizer modes
Re-Sync Earbuds
Both Earbuds
*On Mode*
Bluetooth Disconnected**
Re-sync earbuds
Find With Tile™
Both Earbuds
*Tile App Required
Pair Tile™
Clear Paired Device
Both Earbuds
*On Mode*
Bluetooth Disconnected**
Reset Device
Charge Earbuds
Earbud LED
*Red – Charging*
Blue – Fully Charged**
Charge Earbuds
Charge the Case
Charge Case
Contains Li-ion battery. Battery must be recycled or disposed of properly.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
thefollowlng two conditions: (1) this device may not cause harmful
interference, and (2) this devioe must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could vold the user’s authority to operate the equipment.
This equipment has been tested and fournd to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential Installation. This equlpment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful Interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by tum.Ing the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radlo/1V technician for help.
ISED Compliance Statement
This device contains licence-exempt transmltter(s)/recelver(s) that comply
with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).Operation is subject to the following two conditions! (1)This device may not cause lnterference.(2)Thls device must accept any Interference, including interference that may cause undesired operation of the device.
ISED SAR Compliance Statement
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. Tors transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter.
Toe portable device Is designed to meet the requirements for ·exposure to
radio waves established by the ISED. These requirements set a SAR limit of 1.6
W/kg averaged over one gram of tissue. The highest SAR value reported under
this standard during product certification for use when properly worn on the
head.
FCC SAR Statement
This equipment complies w fth FCC radiation exposure limlts set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by the Federal Communications Commission (USA). These
requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The
highest SAA value reported under this standard during product certlflcatlon
for use when properly worn on the head.
CAUTION
Risk of explosion if the bttery is replaced by an incorrect type; disposal of
a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion; leaving a battery in an extremely
high temperature surrounding environment that can result in an explosion or
the leakage of :flammable liquid or gas; a battery subjected to extreamly low
air pressure that may result ln an explosion or the leakage of flammable
liquid or gas.
Made in Vietnam.
Sesh ANC
MODEL: S2TEW
S2TEWL
FCC ID: Y22-S2TEW
IC: 10486A-S2TEW
1 YEAR GLOBAL WARRANTY
Skullcancly power accessories are backed by a 1-year warranty. If it doesn’t
work the way we promised, we’ll make ft right. For claims, questions, orTenns
& Conditions:
U.S. & Canada only: visit Skulcandy.coovwarranty or cal 1~88-MYSKULL
All other OCK.Jntries: visit Skullcandy.com/support/internatuonal-
support
Many electrical items can be repaired or recyclad, saving natural resources
and the erwironment. If you do not recyde. electrical equipment wlll and up tn
landfil where hazardous substances leak out and cause soil and water
contamination – harming Welldone and also human health. To remind you tnat ad
efectrical equipment can be recycled, It is now marked with a crossed out
wneeled bin symbol. Please do not throw any electrical equipment (including
those marked with crtossed out wheeled bin symbol in your bin.
Many Local Authorities wil have containers that collect batteries for
recycling. Public buildings and your workplace may also have containers. If
you do not recyde, batteries will end up in lanc.tfil whem hazardous
substances will leak out and cause soil and water contamination – harming
Wildlife and also human health. eatteries containing hazardous materials such
as merc (Hg), cadmium (Cd) or lead (Pb) are marked with their chemical symbols
as well. This symbol means lhat according to local laws and ragLJatlons the
battery shal be dfsposed of separately from household waste. When this product
reaches its end of life, take It to a collection point designated by b cal
authorities or return to purchase location or recycling or disposal.
Questions? Visit: www.skullcandy.com
Americas
Skullcandy, Inc.
6301 N Landmark Dr.
Park City; UT 84098 U.S.A.
Skullcandy.com
Europe
Skullcandy Europe BV
Postbus 425
5500AK Veldhoven Nederland
Skullcandy.eu
Mexico
Skulcandy Mexico S de AL de CV
Aristoteles 218
Polanco IV Seccion. Miguel Hidalgo
11550, MxicoCity, Me,<lco
Skullcandy.mx
Canada
Skullcandy Canada ULC
329 Railway St. Unit 205
Vancouver, BC. V6A 1 A4 Canada
Skullcandy.ca
Skullcandy UK LTD
Andrews House
College Road
Guildford
GU14QB
Skullcandy.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>