AIGOSTAR 300000RRD Electric Grill with Stand Instruction Manual

AIGOSTAR 300000RRD Electric Grill with Stand

IMPORTANT SAFEGUARDS

1. The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Keep it awa rom sources of heat, direct sunlight, humidity (never dip it into any liquid), and sharp edges. Do not use the appliance if you have wet hands. If the appliance is humid or wet, unplug it immediately. Do not put it in water.
2. When cleaning or putting it away, switch off the appliance and allow the unit to cool down. Always pull the plug out of socket II on the plug itself, not the cable) if the appliance is not being used, and remove the attached accessories.
3. If you leave the workplace, always switch the machine off or remove the plug from the socket (pull on the plug itself, not the cable).
4. To protect children from the dangers posed by electrical appliances, make sure that the cable is not hanging low and that children do not have access to the appliance.
5. Check the pliance and cable for damage on a regular sis. Do not use the appliance if it is damaged.
6. Do not try to repair the appliance on your own. Always contact an authorized technician. To prevent exposure to danger, faulty cables should only be replaced by the manufacturer, our customer service, or by a qualified person, and with a cable of the same type.
7. This appliance can be used by children aged 8 years and above and by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning the safe use of the appliance, and understand the hazards inved, Children must not play with the appliance. Cleaning and user maintenance shall not be carried out by children without supervision.
8. The appliance is not intended to be operated by means of an external timer or separate remote-control system.
9. Use only original spare parts. 1 O.Caution: During operation, the temperature of the exposed surface may be very hot, Danger of burns.
10. Caution: Charcoal or similar fuels must not be used for this device.
11. Keep at an ade uate safe distance from inflammable jects sue as furniture, drapes, etc. Keep at a minimum distance of at least 15 cm from the wall.
12. Place the unit on a flat and heat-resistant surface.
13. Never let any water get into the fat and oil.
14. Distribute weight evenly on the grill shelf. Maximum weight: 2 kg.
15. WARNING: In order to avoid overheating, this appliance must not be covered by any solid or flexible material such as an aluminum tray, aluminum foil, or trays made of other heat-resistant material. The use of such items or materials on the grill would impair the safety of your product and could lead to serious damage.

SPECIFICATION

PRODUCT STRUCTURE DIAGRAM

1. Grill grid
2. Heating element
3. Thermostat
4. Indicator light
5. Oil-collecting tray
6. Plastic outline border
7. Upper supporting leg*4
8. Middle grid
9. Long lateral baffle*2
10. Short lateral baffle*2
11. Screw*4
12. Gasket*4
13. Butterfly nut*4
14. Lower supporting leg*4
15.  Plastic tube foot pad*4

STAND ASSEMBLY

1. Insert the 4 lower supporting legs into the plastic feet.
2. Insert the upper supporting legs into the lower supporting legs.
3. Align the holes of a long lateral baffle, a supporting leg unit (the bulging side of the supporting leg unit should face inwards), and a short lateral baffle. Screw together, and fix with a gasket and butterfly nut. Do not screw the butterfly nut in too tight.
4. Assemble the rest of the supporting leg units in the same way, then put the middle grid on the stand.
5. Fit the grill grid into the top of the stand.

BEFORE FIRST USE

1. First, remove the heating element.
2. Remove any packaging material that may be present.
3. Clean the grill grid and oil-collecting tray with a moist cloth.
4. Turn the oil-collecting tray upside down to dry.
5. Assemble the grill as shown in the OVERVIEW OF COMPONENTS.
6. Before using the grill for the first time, fill the tray with water and select the HIGH thermostat position. Wait 15 minutes before removing the protective film from the heating coil. The presence of smoke is normal. Make sure that sufficient ventilation is available.

OPERATION

1. Insert the plug in a properly installed 220-240V~50/60Hz protective contact socket.

2. Pour 1.5 L of cold water into the tray between the MIN and MAX marks.
   Note: The water prevents excessive heat radiation in the area of the standing surface of the grill, you should always grill fatty food with water present . However, when grilling the food without grease (such as fruits and vegetables), there can be no water in the tray.

3. Set the thermostat for the desired use: a low or medium temperature is required for warming or reheating, the thermostat will go off when the desired temperature has been reached, then go on and off in cycle. A high temperature is required for rapid cooking and grilling, the thermostat will heat all the time. The MAX temperature can reach 200°C.

4. Lay the food directly on the grill grid. Never place plates, trays, or aluminum foil beneath the food. The grilling time depends on the thickness of the food. Pierce thick foods with metal skewers to grill them more quickly. Turn over the food from time to time.

5. The height of the grill grid can be varied as shown in the graphic below.

6. If the water level drops below the MIN mark after continuous use, pull the plug out of the socket and let the device cool down before filling with water to the MAX mark. Do not pour any cold water over the hot heating element or damage may result.

7. Switching off: Turn the thermostat to OFF and pull out the plug.

TROUBLESHOOTING

CLEANING AND MAINTENANCE

1. Always pull the plug out of the main socket before cleaning and wait until the unit has cooled down.
2. Clean the unit with a slightly dampened cloth. Never dip the heating element in the water!
3. The gridiron oil-collecting tray can be cleaned in soapy water.
4. Never use a steel brush or other objects which may scratch.
5. Assemble all the parts after cleaning.
6. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. The product is subject to technical changes without prior notice.

DISPOSAL

As responsible retailer, we care about the environment. As such, we urge you to follow the correct disposal procedure for the appliance and packaging materials. This will help conserve natural resources and ensure that the appliance is recycled in a manner that protects the health and the environment. You must dispose of this appliance and its packaging according to local laws and regulations. Because this appliance contains electronic components, the appliance, and its accessories must be disposed of separately from household waste when the appliance reaches its end of life. Contact your local authority to learn about disposal and recycling. The appliance should be taken to your local collection point for recycling. Some collection points accept appliances free of charge.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>