LUCIDE 08208 Fix Wall Lamp Installation Guide
- June 5, 2024
- LUCIDE
Table of Contents
08208 Fix Wall Lamp
Installation Guide
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting.
Welcome to the community of #illuminatesyourworld
Item number: 0 820 8/ 0 1/ 31
EAN code: 54112120 82831
FIX W ALL
RECOMMENDED LUCIDE
LIGHT SOURCE
4 90 16/ 0 5/ 60
Dimmable: Yes
Included: No
General
Dimensions LxW Hx: 19cm x 3,2cm x 22cm
Main material: W ood
Color: W hit e and Light wood
Style: Modern
Shape: Triangle
Weight: 0 ,40 kg
Specifications
Dimmable: No
Light direction: Around (Diffuse)
Adjustable in height: Adjustable In Height (After Installation)
Directional: Not Direct ional
Cable: Yes, Cable W it h Plug On Product
Cable length: 290 cm
Sensor: W it hout Sensor
Control: On/ Off Sw it ch – In The Cord
Power supply: Adapter/ Power Grid
IP-Class: 20
Electric Class: 1
Number of light sources: 1
Lamp socket: E27
Maximum wattage: 60 W
Power requirements: 220 -240 V~50 Hz
Warranty: 2 Years
For more specifications of this product please visit www.lucide.com
FIX WALL
|
---|---
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture. The manufacturer does not accept any
responsibility for damage caused by improper installation and service.
Installation should always be done by a qualified electrician. Always isolate
the power before commencing installation, maintenance, or repair. In case of
doubts, please contact a qualified electrician. Please pay attention to
locations where the item can be installed (indoor, outdoor, and bathroom (for
outdoor and bathroom installation, please see further). Indoor items cannot be
used in humid places. Do not put the item in contact with water or any liquids
or inflammable products. Always respect the minimal distance (indicated on the
light) to inflammable products. During installation, make sure that the cables
will not be squeezed or damaged by sharp edges. If the external flexible cable
is damaged, it needs to be replaced exclusively by the manufacturer, his
service agent, or a qualified electrician. This is to avoid all risks. Because
the temperature of the item and the bulbs can get very high, they must cool
down before being touched. Always use the correct bulb (respect type and
maximal wattage as indicated on the product).
Explanation of the symbols that can appear on the fixture
| This item is only suitable for indoor use, exclusive bathroom
(except if a higher IP degree permits that the item can be used in the
bathroom).
---|---
| Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling. Electrical and electronic equipment marked
with this symbol indicates a separate collection of such equipment must be
returned to a municipal waste collection point.
| Class I: The item has an earth connection. The earth wire (green-yellow)
needs to be connected to the earth
connection (marked with this symbol)
| Class II: The item is double insulated and must not be connected to the
earth wire.
| Class III: The item is only suitable for a lower voltage supply and must not
be connected to the earth wire.
| IP 20: Protection against contact with a finger
| If the protection glass is damaged or broken, it needs to be replaced
immediately.
| Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration:
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 2 years from the date of purchase by
the end user, if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchase by the end user.
- Normal wear and tear, discoloring as a result of normal use.
- Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product.
For warranty claims the customer needs to hand over the defective fixture/part and the original purchase ticket.
Further explanations can be found on our website.www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com
tel: +32(0)3 366 22 04
www.lucide.com
| |
---|---|---
https://qrcodes.pro/PEN8Q4| https://qrcodes.pro/mJ5x94|
https://qrcodes.pro/ctf05b
Follow us for the latest lighting trends!