EPEVER WiFi 2.4G RJ45 C Adapter User Manual
- June 5, 2024
- EPEVER
Table of Contents
WiFi 2.4G RJ45 C Adapter
User Manual
※ Thanks for selecting the EPEVER WiFi 2.4G RJ45 C adapter; please read this
manual carefully before using the product.
※ Please keep this manual for future reference.
Overview
Through a local 2.4G WiFi network, the EPEVER WiFi 2.4G RJ45 C can transmit
all operational data from the EPEVER solar controller, inverter, or
inverter/charger to the
EPEVER cloud server in real-time. Users can remotely monitor the connected
devices and program parameters via the EPEVER server platform, and mobile APP.
Features
- Applicable to EPEVER controllers, inverters, or inverter/charger with RJ45 port
- Use immediately after connecting, easy and convenient operation
- Directly powered by the communication port
- Up to 30 meters of communication distance
- Support the “Local” and ” EPEVER Cloud ” working mode.
- One key to restoring the factory settings
Appearance
❶RJ45 connector: Connect to the RJ45 port of the controller, inverter, or inverter/charger. RJ45 Pin Definition：
| Pin | Definition | Pin | Definition |
|---|---|---|---|
| 1 | +5VDC | 5 | RS485-A |
| 2 | +5VDC | 6 | RS485-A |
| 3 | RS485-B | 7 | GND |
| 4 | RS485-B | 8 | GND |
Working processes
① Connect the WiFi adapter to the RJ45 port of the EPEVER controller,
inverter, or inverter/charger.
WARNING: The WiFi adapter is not available to the LS-B series. If the
WiFi adapter is installed in a metal confined space, the signal transmission
will be influenced, depending on the material and tightness of the metal
confined space.
② Add the WiFi adapter into the EPEVER cloud by the PC or mobile APP. Take the
APP as an example to introduce remote monitoring through the mobile phone.
- Scenario 1: There is a local 2.4G WiFi network. The WiFi adapter can upload the collected data to the EPEVER cloud automatically.
Step1: Turn on the WiFi switch on the mobile phone, and connect to the local WiFi network (2.4G WiFi network is a must).
Step2: Open the EPEVER Pair APP and
Click the “EPEVER Cloud” icon.| Step3: Click the “Wifi On Cloud” icon.| Step4:
Connect to the WiFi network as prompts (take “Search for hotspots” as an
example).
Step5: Input password or tick “Original password,” click the “Connect” icon.|
Step6: Input WiFi password, and click
“Write” to connect.| Step7: After showing 100%, click “Confirm.”
(Optional)Step8: Add the connected controller, inverter, or inverter/charger to the cloud platform via the PC or APP. Detail operations refer to the EPEVER Cloud User Manual.
Step9: On the APP home page, click “EPEVER Cloud” to log in for the remote
monitor.
Note: The remote monitor can also be operated by
PC—https://iot.epsolarpv.com.
- There is no local 2.4G WiFi network. The WiFi adapter cannot upload the collected data to the EPEVER cloud.
Step1: Turn on the WiFi switch, open the APP and click “Local.”| Step2: Click the WiFi adapter as prompts. Then enter the local monitoring (only the downloaded models can be monitored).
Specifications
| Model/Parameter | EPEVER WiFi 2.4G RJ45 C |
|---|---|
| Working voltage | 5V± 0.5V(Powered by RS485 corn. port) |
| Power consumption | Peak emission: 5V©100mA Idle: 5V©40mA |
| Enclosure | IP54 |
| Communication method | RS485 |
| Communication parameters | 9600-115200Bps, 8N1 |
| Communication protocol | EPEVER loT communication protocol V1.1 |
| Corn. port standard | EPEVER general communication standardV1-1.0 |
| Working frequency | 2.4 — 2.4835GHz |
| Environment temperature | -40°C— 85°C |
| Dimension | 63 19 10mm |
| Net weight | 7.7g |
HUIZHOU EPEVER TECHNOLOGY CO., LTD
TEL: +86-10-82894896/82894112/+86-752-3889706
Website: www.epever.com
Any changes without prior notice!
Version number: V1.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>