Miele STB 201, STB 205 Turbobrush Instruction Manual
- June 8, 2024
- Miele
Table of Contents
Turbobrush Operating Instructions
Warning and Safety instructions
The Turbobrush complies with statutory safety requirements. Improper use can,
however, lead to personal injury and damage to property.
To avoid the risk of injury to yourself and others and of damage to the vacuum
cleaner and to the Turbobrush, please read these instructions carefully before
using it for the first time.
Keep these instructions in a safe place and ensure that new users are familiar
with the content. Pass them on to any future owner.
Always disconnect the vacuum cleaner from the mains supply when you have
finished using it, before changing over accessories, as well as for
maintenance work and cleaning.
Switch the vacuum cleaner off at the wall socket and unplug it.
Correct application
Correct application
-
The Turbobrush must only be used for household purposes to vacuum and brush dry floor surfaces. Do not use on people or animals.
Any other use, modification or alteration to the brush is at the owner’s risk and could be dangerous. -
This Turbobrush can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the consequences of incorrect operation.
Safety with children
- Children under 8 years of age must be kept away from the vacuum cleaner and the Turbobrush unless they are constantly supervised.
- Children 8 years and older may only use the vacuum cleaner and Turbobrush unsupervised if they have been shown how to use them safely and recognise and understand the consequences of incorrect operation.
- Children must not be allowed to clean or maintain the vacuum cleaner and Turbobrush unsupervised.
- Please supervise children in the vicinity of the vacuum cleaner and Turbobrush and do not let them play with them.
Technical safety
- Before using the Turbobrush, check for any visible signs of damage. Do not use a damaged appliance or damaged accessories.
- Do not immerse the Turbobrush in water. Clean all parts with a dry or slightly damp cloth only.
Correct use
- Switch the vacuum cleaner off immediately during pauses to avoid danger.
- Never touch the roller brush while it is rotating.
- Do not use the Turbobrush at head level. Long hair, ties, scarves, etc. could become entangled in the roller brush.
- Keep the Turbobrush away from curtains, clothing, etc. as these could be vacuumed in and become entangled in the roller brush.
- Do not vacuum up any inflammable or combustible liquids or gases and do not vacuum in areas where such substances are stored.
- Do not vacuum any surfaces where there is a danger of items being sucked up or becoming entangled in the roller brush.
- Do not vacuum up any water, liquid or damp dirt. Wait until any freshly cleaned or shampooed carpets or floor coverings are completely dry before attempting to vacuum.
- Do not vacuum up ashes or coals, whether glowing or apparently extinguished.
Miele cannot be held liable for damage caused by incorrect use or operation or by non-compliance with these Warning and Safety instructions.
Turbobrush features
The Turbobrush is operated by the suction power of the vacuum cleaner. It has
a rotating roller brush which is very effective at picking up thread, hairs
and fluff.
Four rollers maintain the brush 1.5 mm away from the floor.
Recommended use
The Turbobrush is particularly suitable for vacuuming thread and hair from cut
pile carpeting.
The normal floorhead or one of the Miele floorbrushes should be used for
cleaning hard floors, such as tiled or parquet floors.
It is also important to observe the flooring manufacturer’s cleaning and care instructions.
The following should not be vacuumed using the Turbobrush:
– Floor surfaces with a variable or uneven profile. The brush might come into
contact with the floor and cause damage.
– Carpets such as Saxony with very long pile, berber or sheepskin rugs and
valuable hand-knotted carpets, e.g. Persian or similar. There is a danger of
the threads being pulled out.
Using the Turbobrush
- To achieve the best effect, pass the Turbobrush slowly backwards and forwards over the carpet or floor covering.
For carpets with fringes always draw the Turbobrush from the carpet across the fringe towards the rest of the floor.
Fitting the Turbobrush
Model STB 205
This Turbobrush is intended for use with Miele vacuum cleaners.
- Instead of the usual floor attachment, fit the Turbobrush to the suction tube. Ensure that the locking device engages.
Model STB 201 Vario
This Turbobrush has an adapter, enabling it it be used with non-Miele vacuum
cleaners. The adapter fits suction tubes with a diameter of between 30 and 38
mm. Only use the Turbobrush with high performance vacuum cleaners.
Opening the air adjustment slide
The brush is operated by the suction power of the vacuum cleaner. With deeper,
dense pile carpets the roller brush may rotate more slowly. This is caused by
the carpet pile creating a seal around the the mouth of the Turbobrush and
hindering the flow of air. This will affect how well the carpet is brushed.
- To increase the airflow, open the air adjustment slide (left hand illustration). In all other situations the air adjustment slide should be closed, to benefit from the full suction power.
- Close the air adjustment slide (right hand illustration).
Always disconnect the vacuum cleaner from the electrical supply for cleaning and maintenance work on the Turbobrush. Switch off at the wall socket and remove the plug.
Removing threads and hairs
- Cut any threads or hairs that have become entangled on the roller brush with a pair of scissors. Then run the vacuum cleaner to vacuum up the bits.
For more obstinate tangles or blockages inside the Turbobrush, the cover can be opened. Any large particles can then be easily removed.
- Loosen the locking screws on the underside of the brush with a coin and take off the roller cover.
- Remove any dirt in the brush compartment interior and from the roller brush.
- Put the roller cover back on and close it.
- Tighten the locking screws.
Miele & Cie. KG
Carl-Miele-Strane 29
33332 GLItersloh Germany
Tel.: 05241 89-0
Fax: 05241 89-2090
Internet: www.miele.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>