Asiarf AWV03SR3 WiFi Router Instructions
- June 5, 2024
- AsiaRF
Table of Contents
INSTRUCTIONS
As illustrated,
- Place the device beside your existing wifi router, and power it on.
- Connect the two devices with the attached cable. Do pay attention to plugging one cable head into the WAN port of the new device, and the other head to the LAN port of the existing router.
- Find the wifi name and the password from the bottom label of the new device, connect it, and enjoy your internet. 4.12111 could not plug in the telecom line.
- USB type-A connector is unfunctional.
Configuration
- Connect the Ethernet cable to the LAN port and your notebook/computer.
- Power up.
- Open Internet Explorer from your notebook/computer
- Enter: http://10.10.10.254
- Enter the Username and Password. If this is the first time use then enter “admin.’ and “admin” on both username and password.
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help,
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules, Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference. and (2) this device must accept any interference received,
including interference that may cause undesired operation,
IMPORTANT NOTE
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Country Code selection feature to be disabled for products marketed to the
US/CANADA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>