Akuvox EC32 Elevator Controller User Guide
- June 5, 2024
- Akuvox
Table of Contents
Akuvox EC32 Elevator Controller
Installation
Configuration
- Access the Akuvox Intercom website: launch a browser and type in the IP address of R29/R20A then enter the username and password to login. (username/password:admin/admin by default)
- Set up Lift access control function: on web UI of R29/R20A, go to the path: Intercom > Lift Control > Akuvox EC32 Action and fill the username and password of EC32.
- Setting user access rights: on web UI of R29/R20A, go to the path: Intercom > Card Setting or go to the path: Intercom > Private Key (R29 only) or go to the path: Intercom > Face (R29 only) to set up the Lift Floor Number for the corresponding user.
- Access the EC32 website: launch a browser and type in the IP address of EC32 then enter the username and password to login. (username/password: admin/888888 by default)
- Set up relays’s delay time: on web UI of EC32, go to Config page to set the Intercom open time as your need.
- Disable Auto reboot: on web UI of EC32, go to Hardware > Device > Restart everyday page to disable the auto reboot. This Setting is enabled by default.
Notice Information
Information contained in this document is believed to be accurate and reliable
at the time of printing. This document is subject to change without notice,
any update to this document can be viewed on Akuvox’ s website:
http://www.akuvox.com © Copyright 2021 Akuvox Ltd. All rights reserved.
AKUVOX (XIAMEN) NETWORKS CO., LTD.
ADD: 10/F, NO.56 GUANRI ROAD, SOFTWARE PARK II, XIAMEN 361009, CHINA
www.akuvox.com
Unpacking
Before you begin using the device, please check the version you got and ensure
that the following items are included in the shipped box: 
Note： Please prepare four M4x20 self-tapping screws or longer M4 self- tapping screws by yourself.
Device Wiring
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>