FISCHER 084.010 Electric Knife Sharpener User Manual
- June 5, 2024
- Fischer
Table of Contents
FISCHER 084.010 Electric Knife Sharpener
NOTICE
- To ensure and extend the use time of the motor, while starting the power, do not press the grinding wheels too hard that the motor is not able to run.
- To ensure and prolong the use time of the motor, avoid the overload using of the machine.
- Before using, clean the remaining drops of water or oil on the knife to avoid the attachment of oil on the grinding wheels so that it will have a longer life span.
- When using this machine to sharpen any blunt knife for the first time, it is normal and necessary to sharpen several times.
TWO STEPS OF FAST SHARPENING
lnstructions:
Put the knife into the sharpener nicks, pull backward from the front. The two
sharpening nicks on the left are equipped with rough grinding wheels; the ones
on the right are equipped with fine grinding wheel. Remember this! Sharpen
your knife on the left first and then sharpen it on the right and do this in
tums. Do not use any water to assist your sharpening!
A. THE FIRST STEP :
Use the two sharpening nicks (with rough grinding wheel) on the left:
Put the knife into the sharpening nicks on the left and press a little! But do
remember to operate it in tums:
Once on the left and once on the right!
(If the knife is very blunt, you can do it one or two more.)
B. THE SECOND STEP:
Use the two sharpening nicks (with fine grinding wheel) on the right:
The same as the first step: once on the left and once on the right! But
remember not to press it too hard! Try to keep a light hand!
NOTES:
After these steps have been done, we can try if the knife is sharp enough. If
you consider it is still not very sharp, you can do it one or two more times.
Use a sharpening steel to remove any remaining particles and to give an extra
fine cutting edge 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>