JOCEL JSR002211 CLOTHES DRYER Instruction Manual

Table of Contents

CAUTIONS

Whenever this machine is being used or not, make sure to keep it at least 1.5M away from the water or fire source. Clean with a damp cloth instead of water rinsing.
Make sure the power supplying socket is earth contact.
When using, please make sure clothes have already been spin-dried by washing machine or screw-dried by hands, so as to reduce water dews dropping down to make floor dap. Meanwhile, less water also ensures improving electricity isolate status and shortens clothes drying period to save energy.
Never touch the metal parts on the wind outlet so as to avoid getting burnt.
Keep children and disabilities away from this machine when it is working.
Clothes to be dried should be able to endure 70 degrees above,
Drying capacity up to10Kg maximum.
Wind-outlet and entry should keep good ventilation.
This machine is not suitable for repair by non-professionals.

This appliance avoids clothes friction, goffer or damage.
PTC heating element, is different from the traditional heating method, to ensure maximum safety. Double heating protection.
Avoid re-pollution: clothes isolated from outside space, exempt from dust and insect contacts, eliminate bacilli.
Multi-function in one: clothes dryer, room warmer, and clothes bureau.
Energy saving: save energy compared with the traditional similar appliance.
High efficiency: it takes 1 to 3 hours to dry clothes.
Convenient to carry: small, light, easy to disassemble, and convenient to carry for travel.

PTC heating element features safe, energy saving, long using life, and erosion proof. This appliance adopts the working principle of:

Fan to form a positive air pressure inside the cover.
Enter air to be heated by the PTC element, then come inside the cover.
Clothes, in static status, are processed by the hot wind, then moisture be get rid of and impel outside the cover.

Insert 3 pcs of standing feet into correspond holes on the bottom of the motor unit.
Fit the connector onto the upper supporting tube (groupware), and screw it clockwise until reaches position.
Fit the water-proof plate onto the lower supporting tube, then fix the lower supporting tube, then fix the lower supporting feet onto the motor unit, and screw it clockwise to ensure reaching the position.
Insert the hanger groupware into the upper supporting tube, then put down the aluminum hangers to a level position.
Put the clothes onto the clothes racks, put on the cover and close with a zipper.

DISASSEMBLING
To disassemble this machine, just follow the above installation steps contrarily.

Insert the power plug into the power socket that should be with earth contact.
Rotate the switch, and the machine goes on working, ate the meantime, the power indicator illuminates.
Rotate the switch to LIGADO (on) position and set the time for drying clothes.
Rotate the switch to DSLIGADO (off) to turn off the motor.
Rotate the switch knob anti-clockwise to set it to work without a time limit.

Nº	Problem	Possible cause

1

| ****

Drying time too long (>180mn)

| 1. Clothes too thick.

2. Clothes not spin-dried by washing machine or screw-dried by hand.

3. Cover not close appropriately wind leaking.

2

| ****

Machine suddenly stop when working

| 1. Wind-entry or outlet blocked by clothes or other things, machine startup protection process.

2. Having exceeded set time

3

| Power indicator doesn’t illuminate, machine do not work.| 1. Power cut.

2. Power socket fuse melt break.

3. Machine fuse melt break.

The warranty is valid only on the presentation of the invoice of purchase.
This WARRANTY is limited exclusively to parts substitution ineffective due to faulty manufacture, made in our workshops.
The elimination of several faults of the scope of the guarantee is made for repair or replacement of defective parts, according to the discretion of our technical services. Defective parts are our property.
Are not covered under warranty damage caused by transportation, neglect or poor use, improper assembly or installation, as well as external influences such as: lightning strikes or power, flooding, humidity, etc..
Lose warranty, all appliances that are not being used according to the instructions, or connected to FEEDING NETWORKS do not guarantee a constant voltage of 220/240V.
The warranty does not cover damages for personal injury or damage caused directly or indirectly in any capacity whatsoever.
This warranty terminates when it is found to have been undergoing repairs, alterations or interventions by any person not authorized by Joel.

With the modification or disappearance of the nameplate of the appliance.
Exceeded the period of 2 years for home appliances and 06 months for industrial appliances, the warranty expires and assistance will be made by charging the costs of manpower, according to current fees.