celsius CELCV250 2000W Convector Heater Instruction Manual

CELCV250 2000W Convector Heater
Instruction Manual

Model: CELCV250

General Care and Safety

Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

WARNING: You must not cover this appliance. Covering this appliance presents a fire risk and will activate the safety fuse; permanently disabling the unit.
WARNING: Do not use this appliance in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any flammable material a minimum distance of 1 metre from the air outlet.

• Use only the voltage specified on the rating label of the appliance.
• Keep all objects at least 1 metre from the front, sides and rear of the appliance.
• This appliance is intended for household use only and not for commercial or industrial use.
• Indoor use only.
• Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
• Do not use the appliance if it has been dropped or damaged.
• The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
• Never use the appliance to dry clothes.
• Always unplug appliances when not in use.
• When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
• Do not use if there are visible signs of damage to the appliance.
• Do not connect the appliance to the mains supply until completely assembled and adjusted.
• Ensure hands are dry before handling the plug or main unit.
• Ensure the appliance is on a flat, stable, heat-resistant surface.
• Do not operate with cord set coiled up as a heat build-up is likely, which could be sufficient to become a hazard.
• Carry out regular checks of the supply cord to ensure no damage is evident
• Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions or has been dropped or damaged in any manner. Take to a qualified electrical person for examination, electrical service or repair.
• Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
• It is recommended that this appliance is plugged directly into the wall socket. Power boards are not rated to supply power to high-wattage appliances.
• A correctly specified, an undamaged extension cord may be used with this appliance provided it is used in a safe manner.
• Do not remove the plug from the power socket until the appliance has been switched off.
• Do not remove the plug from the power socket by pulling cord; always grip plug.
• Do not place a cord under the carpet or cover it with rugs or furniture. Arrange the cord so it cannot be tripped over.
• Don’t place appliances on bedding or on thick & long carpets where the openings may get blocked.
• Switch off and use the handle provided when moving
• Do not place the appliance close to a radiant heat source.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
• Do not sit on the appliance.
• Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove the plug from the mains supply before cleaning.
• Do not operate in areas where petrol, paint, or other flammable liquids are used or stored.
• Do not use this appliance in the immediate surroundings of a bath, a shower, a swimming pool, or other liquids.
• The appliance must not be immersed in any liquids.
• There are no user-serviceable parts installed in the unit.
• Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
• This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc. are stored.
• If your appliance does not work or is not working properly, contact the place of purchase or the Customer Services Team.

Assembly Instructions

WARNING: Heater must not be used without the feet fitted. This appliance has been supplied with1 way screws’ for permanent installation of the feet. This is a safety requirement for the New Zealand and Australian market.

ASSEMBLY OF HEATER

• Carefully turn the Main Body upside-down on a scratch-free and stable surface. Be careful to prevent damage to the cosmetic finish or your floor surfacing.
• Attach the feet to the base of the heater by aligning on the bottom ends of the heater side moldings.
• When the screw holes on the feet and heater body are aligned then fix the screw in place. Use two screws for each foot.

Operating Your Heater

Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions.
WARNING: In order to avoid overheating or fire, do not cover the heater.
WARNI N G: Keep all objects at least 1 meter from the front, sides, and rear of the appliance.
WARNING: Do not use this heater with a programmer, separate timer, remote-control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
WARNING: Never leave this heater unattended when in use. Ensure the heater is on a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the off position, insert the power plug into the main outlet and switch it on.
CAUTION: Ensure the power cord is not tight because if pulled it may partially pull the plug from the socket. A partially inserted plug will overheat the plug and socket and could result in fire.
Note: When the appliance is turned on for the first time, it may release a slight odor or smoke. This odor or smoke is a normal occurrence caused by the initial heating of the internal heating elements and should not occur again.
Check that the heat control switch is set to Off position before plugging the heater intothe mains supply. For greater economy, use the High Heat setting initially and then switch to the Low Heat setting.
HEAT CONTROL
The control switch positions are:

TURBO SWITCH
In addition to the three heat sett,ings there is a fan with a separate On/Off switch located on the control panel. The fan function is for distributing heat into the room at a faster rate.

THERMOSTATIC CONTROL

1. Rotate the thermostat knob clockwise until you reach the maximum position.
2. When the room reaches a temperature that is comfortable for you, slowly turn the knob anti-clockwise until the heater just turns off (you will hear a click).
3. The heater will now cycle on and off to maintain the comfort level you have set.
4. Take note of this setting position for future use.

TIMER
The appliance will always be on when the slide switch is in the “I” position.
The appliance will always be off when the slide switch is in the “O” position.
To set the Timer; set the MODE switch to the Timer position
. (This function can only be used once a heat level has been selected; see thermostat section).
You must set the time prior to programming the Timer. To do this; turn the outer dial of the timer in a clockwise direction until the time of the day (24-hour clock) corresponds with the triangular marking. For example, if it is 2 pm (1400 hours) then set the triangular mark in line with 14. One complete turn of the dial corresponds to 24 hours.
There are 96 “riders”, positioned around the dial, each rider represents 15 minutes. Where all the “riders” are pushed to the outside of the timer the appliance will be ON continuously.
To set a specific time for example: If you want the appliance to be on from 6 pm to 10 pm, then set all the riders from 18 to 22 (1800 hours to 2200 hours) to the outside of the rim and all other riders to the inside of the timer. The unit will then turn on automatically at 6 pm and off again at 10 pm.

SAFETY DEVICES
This appliance has three protection devices:

• Tilt Switch – this will automatically turn the appliance off if the appliance is not in the correct operating position.
• Resettable Thermal Link – this will automatically disconnect the power to the appliance at a pre-set overheat temperature. After cooling down it will reset and power on again. If this occurs, investigate what is causing the appliance to overheat.
• Thermal Fuse – this disconnects the appliance permanently in case of overheating. (It is nonresettable).

CAUTION: The appliance generates heat during use. Precautions must be taken to prevent the risk of burns, scalds, fires or other damage to persons.

CARE AND CLEANING

• The heater requires regular cleaning to ensure trouble-free operation:
• Unplug the heater from the mains supply before cleaning.
• Ensure that the heater has been allowed to cool down completely before cleaning.
• The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
• Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
• Never use solutions such as petrol, thinners or polishing agents.
• Ensure the heater is dry before plugging back into the main supply.
• Do not attempt to dismantle the appliance.
• There are no user-serviceable parts. For service or repair, contact an authorized electrical service technician.

PROOF OF PURCHASE
To receive a warranty retain the receipt as proof of purchase.
TECHNICAL SPECIFICATION
Model No: CELCV250
Supply: 220-240VAC 50Hz
Wattage: 1700-2000W
SUPPORT AND TECHNICAL ADVICE

Celsius – New Zealand
Monday – Friday 8 am-5 pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@celsius.co.nz| Celsius – Australia
Monday – Friday 8 am-5 pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@celsiusforhome.com.au
---|---

One Year Warranty

Thank you for purchasing this Celsius product. Your product is warranted against faults and manufactured when used in normal domestic use for a period of one year. In non-domestic use Celsius limits the voluntary warranty to three months.
Celsius undertakes to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and remedies available to you under the law in relation to the goods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
In New Zealand, this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).

Celsius – New Zealand
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.celsius.co.nz| Celsius – Australia
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 465 324
www.celsiusforhome.com.au
---|---

Celsius One Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name:
Address:
Place Of Purchase:
Date Of Purchase:
Model Number:
Name Of Product:
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.

Documents / Resources

| celsius CELCV250 2000W Convector Heater [pdf] Instruction Manual
CELCV250, 2000W Convector Heater, Convector Heater, CELCV250, Heater
---|---

References

• Celsius Heating & Cooling – CelsiusNZ
• Celsius Heating & Cooling – CelsiusNZ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>