celsius CELDF170 30cm Copper Desk Fan Instructions
- June 5, 2024
- celsius
Table of Contents
celsius CELDF170 30cm Copper Desk Fan
INTRODUCTION
Thank you for choosing this Celsius product. This Celsius appliance has bee designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.
General Care and Safety Guide
- Use only the voltage specified on the rating plate of the appliance.
- Keep all objects at least 1 Metre from the front, sides and rear of the appliance
- This appliance is intended for household use only and not for commercial or industrial use.
- Use this appliance only as described in this manual. An other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Always unplug appliance when not in use.
- When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the CDB Customer Services Team.
- If your appliance does not work, or is not working properly, contact the place of purchase. Repair work on the appliance by unqualified persons can cause serious risk to the user.
- Ensure hands are dry before handling the plug or the main unit.
- Carry out regular checks of the supply cord to ensure no damage is evident.
- Children should be supervised to ensure that they do not play with the appliance.
- Ensure that the cord is fully extended (not coiled) while in use.
- Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade of the fan during operation to reduce the risk of injury to person and/or damage to the unit.
- Switch off and use handles provided when moving.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they are supervised or have been given instruction concerning the use of the fan by a person responsible for their safety.
- It is recommended that this fan is plugged directly into the wall socket.
- A correctly specified, undamaged extension cord may be used with this fan provided it is used in a safe manner.
- Never place appliance close to radiant heat source.
- Never operate in areas where petrol, paint or other flammable liquids are used or stored.
- Never use the appliance to dry clothes.
- Never insert or allow foreign objects to enter an ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
- Never use abrasive cleaning products on this appliance Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
- Never connect the appliance to mains supply until completely assembled and adjusted.
- Never remove plug from power socket until the appliance has been switched off.
- Never remove plug from power socket by pulling cord – always grip plug.
- Never twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
- Never use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids. The appliance must not be immersed in any liquids.
- Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments and other residential type environments
- Never use this appliance outdoors.
- Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged inany manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary. If the supply cord is damaged, it must be replaced by th manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
Components
- Front Grill
- Blade
- Rear Guard Fixation Screws
- Rear Grill
- Motor Shaft
- Motor
- Oscillation Pin
- Control Switch
- Knob
- Pipe
- Base
- Ring
- Base Locking Screw
Assembly
The fan head and the pipe are assembled. Unscrew the fastener & ring and base
locking screw from the pipe. Insert the pipe through the hole in the centre
of the base and twist into position. Secure the pipe to the base with the
fastener, ring and base locking screw, in that order. (See picture)
Fasten
the rear grill onto the motor with the four rear grill screws provided.
Install the fan blade onto the motor shaft by tightening the blade screw.
Centre the front grill by aligning the logo on the grill hub so it is
horizontal and parallel to the floor. Then secure the front and rear grills
completely together by snapping grill clips into place. Lastly, tighten the
grill
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety precautions outlined Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance.
Fan control switch
The control switch positions are:
- 0 = Off
- 1 = Low speed
- 2 = Medium Speed
- 3 = High Speed
- Place the fan on a dry, level and sturdy surface.
- Plug the power cord into the socket, makingsure the speed control is at off position.
- To operate the fan, turn speed control dial clockwise until desired wind speed is achieved.
- Adjust tilt by turning neck piece assembly (9) and tilting body to the desired wind direction (i.e. Either upward or downward).
- To activate the oscillation function, push down the oscillation pin (7) on the top of the motor.
- The fan will then oscillate until the pin is pulle back up.
Cleaning
- To avoid risk of electric shock, before cleaning, you MUST ALWAYS switch off and unplug the fan before cleaning.
- Use only a soft, damp cloth to gently wipe the fan and dry well.
- Do not immerse the fan in water and never allow water to enter the motor housing.
- Do not use harsh chemicals to clean the fan.
One Year Warranty
Thank you for purchasing this Celsius product. Your product is warranted
against faults and manufacture when used in normal domestic use for a period
of one year. In non-domestic use Celsius limits the voluntary warranty to
three months. Celsius undertake to repair or replace this product at no charge
if found to be defective due to a manufacturing fault during the warranty
period. This warranty excludes damage caused by misuse, neglect, shipping
accident, incorrect installation, or work carried out by anyone other than a
qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and
remedies available to you under law in relation to the goods or services to
which this warranty relates. In Australia, our goods come with guarantees that
cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. In New Zealand this warranty is
additional to the conditions and guarantees of the Consumers Guarantee Act
(1993).
- Celsius – New Zealand
- CDB Media
- PO Box 100-707
- N.S.M.C
- Auckland, 0745
- Phone +64 (0)9 917 4000
- Phone 0800 232 633
- www.celsius.co.nz
- Celsius – Australia
- CDB Goldair Australia Pty
- PO Box 574
- South Morang
- Victoria, 3752
- Phone +61 (0)3 9365 5100
- Phone 1300 465 324
- www.celsiusforhome.com.au
References
- Celsius Heating & Cooling – CelsiusNZ
- Celsius Heating & Cooling – CelsiusNZ
- Celsius Heating & Cooling – CelsiusNZ
- Celsius Heating & Cooling – CelsiusNZ