LUCIDE LC0643 Bentoo-LED Spotlight Installation Guide
- June 5, 2024
- LUCIDE
Table of Contents
LUCIDE LC0643 Bentoo-LED Spotlight
Thank you for purchasing a Lucide original! This manual will hopefully guide you easily through the installation process. We aim to inspire and illuminate our clients by offering trendy, high-quality and affordable lighting. Welcome to the community of #illuminatesyourworld
General
- Dimensions LxWxH: 8cm x 8cm x 11cm
- Main material: Aluminum
- Color: White
- Style: Modern
- Shape: Cylinder
- Weight: 0,40kg
Specifications
- Dimmable: Yes
- Light direction: Downlight
- Adjustable in height: Not In Height Adjustable
- Directional: Not Directional
- Cable: No Cable On Product
- Sensor: Without Sensor
- Control: Light Switch Control
- Power supply: Adapter/Power Grid
- IP-Class: 20
- Electric Class: 1
- Number of light sources: 1
- Lamp socket: GU10
- Maximum wattage: 5W
- Power requirements: 220-240V~50Hz
- Lumen: 320Lm
- Beam angle (if directional): 40°
- Color Rendering Index: 80
- Expected lifetime: 25000h
- Warranty: 2 Years
For more specifications of this product please visit www.lucide.com
**Dimensions
**
Installation
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician. Always isolate the power before commencing installation, maintenance or repair. In case of doubts, please contact a qualified electrician. Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products. During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician. This is to avoid all risks. Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).
Explanation of the symbols that can appear on the fixture
This item
is only suitable for indoor use, and exclusive bathroom (except if a higher IP
degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment
must be collected for reuse and recycling. Electrical and electronic equipment
marked with this symbol indicating a separate collection of such equipment
must be returned to a municipal waste collection point.
Class
I: The item has an earth connection. The earth wire (green-yellow) needs to
be connected to the earth connection (marked with this symbol).
Class
II: The item is double insulated and must not be connected to the earth
wire.
Class
III: The item is only suitable for a lower voltage supply and must not be
connected to the earth wire.
IP 20: Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced
immediately.
Please
respect the minimum distance from the bulb to inflammable objects.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>