MAYFLASH W009 Wireless Wii U Pro Controller to PC or PS3 Adapter User Manual
- June 5, 2024
- MAYFLASH
Table of Contents
MAYFLASH W009 Wireless Wii U Pro Controller to PC or PS3 Adapter
Features
- Wirelessly connects your Wii U Pro controllers to your PC\PS3 or Amazon Fire TV. srh WIiesspenomance
- Supports the builtin Vibration Feedback with no delays.
- Sipnorts “Games for Windows” proprietary input protocol.
- Functioning distance of 2 yu protOcol.
- Plug and Play on PS3. No Turbo function and no Vibration
- Feedback when used on PsS3. Input Switch with 2 input protocol modes for extra versatility.
- Direct Input (standard HID protocol) supports 4 controllers at the same time.
- Xinput (Xbox 360 controller protocol) supports one controller per individual adapter.
- Supports Amazon Fire TV under the Xinput mode (info: The Dinput mode does not support Fire TV).
- All buttons (except for the “Power” button), shoulder triggers, analog sticks, and their “click-in” tops are fully functional.
- Compatible with Windows 98,XP,Vista and Windows 7 and Windows 8(32 bit and 64 bit adapter. om version5) ).
HOW TO SET UP (For PC)
- Step 1: Instal the driver software from the included CD.
- Step 2: Pug the adapter into an empty USB slot on your PC.
- Step 3: For the initial syncing,. press the “SYNC” button on the adapter itself and on the Bottom ot your controller, you tind that the blue LEDs on your controller and the red LED on the adapter will flash quickly. Once the syncing process is complete, ne Lebon the adapter and your controller will Stay it. set to DinNPO mode, the “Player Number LEDs on your controllers will light up in the order.
- Step 4:Switch to “DINPUT or XINPUT mode by using the switch located on the side.
- Step 5. To disconnect all controllers and turn oT the adapter, press the Power button on your controller Seconds.
HOW TO SET UP (For PS3)
- Step 1: Switch to “Dinput mode by using the switch located on the side.
- Step 2: Plug our adapter to your PS3 USB port
- Step 3: For the initial syncing., press the “SYNC button on the adapter itself and on the bottom of your controller, you’ll find that the blue LEDs on your controller and the red LED on the adapter will flash quickly, Once the syncing process is complete, the LED on the adapter and your controller will stay lit.
- Step 4: To disconnect all controllers and turm off the adapter, press the Power button on your controller for 2 seconds.
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.