MAYFLASH N64, Game Cube, SNES, SFC to HDMI Converter User Manual
- June 4, 2024
- MAYFLASH
Table of Contents
N64, Game Cube, SNES, SFC to HDMI Converter
User Manual
Introduction
We want to say thank you for choosing MAY FLASH N64/Game-Cube/SNES/SFC to HDMI Converter and congratulation you on your decision. We are sure that our product will provide you with a great deal of gaming pleasure for years to come. These instructions contain valuable information about operating and configuring the device. Please keep this manual in a safe place for future reference. If you find any issues or have any difficulty operating the device, please reach out to us at [email protected] and we will be more than happy to help you out.
How to Work
Plug and Play! No need to install any drivers.
Specifications
| Power consumption: | Below 2W |
|---|---|
| Video input Mode: | Includes all the display modes of the N64/GameCube/SNES/SFC |
console (NTSC, PAL )
HDMI output Mode:| Outputs pure digital HDMI video/audio signals
Input Connector:| AV Multi Out Plug
Output Connectors:| HDMI Connector & 3.5mm Stereo Audio Jack
Note: MAY FLASH N64/GameCube/SNES/SFC to HDMI Converter is not upscale.
The HDMI output resolution of this converter is 1080p. But please make sure
your cable is an HDMI Male to A Male Cable and the connected monitor has HDMI
ports!
- It will NOT be compatible with HDMI to mini HDMI Cable, HDMI to VGA Cable, and HDMI to DVI Cable. Otherwise, there will be no sound, no picture, no signal, or other incompatible situations.
- If the connected monitor has no audio output, please use the extra 3.5 mm audio jack to connect a speaker or headphones.
- Please don’t change the video output resolution of the game console. If there is no signal or other errors, please reset the video output resolution of the game console to the default.
- If there is no signal, please check if the connections between the converter and game console, and TV monitor are working properly. Or try to clean your console and game cartridge.