TOOLKISS HDTK-TD-02 Sliding Frameless Tub Door Instruction Manual

TOOLKISS HDTK-TD-02 Sliding Frameless Tub Door

| Reversible For a Left or Right Door
---|---

PACKAGE CONTENT

PART#

|

DESCRIPTION

|

QTY

---|---|---
A| Bottom guild| 1
B| Water seal| 1
c| U channel-1| 1
D| Magnetic door seal strip| 2
E| Door panel| 1
F| Handle| 1
G| F shape seal| 2
H| Anti-Jump Assembly| 2
I| Roller| 2
J| Wall Bracket Assembly| 1
K| Top T「ack Assembly| 1
L| Glass holders| 2
M| Stopper| 1
N
。| U channel-2| 1
O| Fixed panel| 1

HARDWARE CONTENT

TOOL REQUIRED

SAFETY INFORMATION

CAUTION

Please carefully read the following important safety information before handling or installing this shower. There is a risk of serious injury while handling this product. To minimize these risks, please note:

• Always wear safety glasses and gloves while
• Always read and follow all the steps in the installation
• Inspect all contents and glass for damage before
• Extreme caution should be taken while handling the glass during installation as the tempered glass may shatter if in contact with a hard surface.
• Handle the tempered glass with caution! Improperly handling the glass can cause it to break suddenly  in small pieces  (never in pointed fragments).
• Always take all precautions not to touch the tempered glass with any tools during the installation, or after
• Do not cut or modify the tempered glass as it will shatter if cut.
• Carefully remove product from packaging and keep packaging until installation is complete.
• Inspect all parts for damage; if there is damage to the unit prior to installation, please contact customer service at the number provided in this guide.
• Install the shower on a floor that is level and able to accommodate the weight of the unit and an occupant.
• Consult local building codes and compliance standards prior to installation and ensure conformity.
• After installation, and from time to time, check the glass for fit and finish to ensure that nothing has come loose since installation.
• Keep this installation manual for future reference.

NOTE : Heavy product! You will need at least two people to install this unit  properly.

INSTALLATION INSTRCUTIONS

Check both of the ∇finished walls for plumb and the threshold for level

NOTE : This model requires a minimum 2-3/8″ of flat threshold space for installation.

Measure “W” and cut the alu threshlod same length as “W -1 9/16”.

U channel-2 Installation

Roller & Stopper Installation

Wall Bracket Assembly Installation

Fixed panel Installation

Top Track Assembly Installation

Wall Bracket Assembly Installation

Bottom guild Installation

Door panel Installation

Magnetic strip Install to door panel

Determine the C % D position

U channel-1 Installation

Anti-Jump Assembly & Handle Installation

SEALING

Ensure that the Shower door closes tightly and opens smoothly.
Apply a g。。d quality silicone sealant along the wall Jamb(C) and Water seal (B)
Allow 24 hours for silicone to d叩before use.
Measure ”X” and cut the Water seal(B) same length as “X”

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>