Oase Wall Spout LED Set Instruction Manual
- June 3, 2024
- Oase
Table of Contents
Oase Wall Spout LED Set
Original manual. This manual belongs with the unit and must always be passed on together with the unit.
WARNING
- This unit can be used by children aged 8 and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised or have been instructed on how to use the unit in a safe way and they understand the hazards involved. Do not allow children to play with the unit. Only allow children to carry out cleaning and user maintenance under supervision.
Further operating instructions are available for download as PDF files on the Internet: www.oase.com/manual
The following additional topics are addressed in the operating manual:
- Symbols on the unit
- Cleaning and maintenance
- Technical data
- Disposal
Intended use
Only use the product described in this manual as follows:
- As spotlight
- While adhering to the technical specifications.
The following restrictions apply to the unit:
- Do not use for commercial or industrial purposes.
Safety information
Electrical connection
- Special regulations apply for electrical installation in outdoor spaces. Only a qualified electrician may perform the electrical installation.
- The qualified electrician has the necessary professional training, knowledge and experience to perform electrical installation in outdoor spaces. The electrician can detect potential dangers and knows how to adhere to regional and national standards, regulations and directives.
- For your own safety, please consult a qualified electrician.
- Only use the power pack included in the scope of delivery.
- Only plug the unit into a correctly installed outlet.
- Only connect the unit if the electrical data of the unit and the power supply match.
- Ensure that the unit is protected via a fault current protection device with a rated fault current of max. 30 mA installed in the mains. If necessary, contact a qualified electrician.
- Protect open plugs and sockets from moisture.
Safe operation
- Do not look directly into the light source.
- Do not use the unit, if electrical lines or the housing are damaged.
- A damaged connection cable cannot be replaced. Dispose of the unit.
- Do not carry or pull the unit by its power cable.
- Route lines in such a way that they are protected from damage and do not present a tripping hazard.
- Should problems occur, please contact the authorised customer service or OASE.
Product Description
- LED spotlight
- Power pack (LED driver)
Assembly and start-up
A, B, C
- Position the power pack at least 2 m from the edge of the pond.
- Connect the connection cable of the spotlight to the socket on the power pack and handtighten the union nut.
Switching on the unit: Insert the power plug of the power pack into the socket. The unit switches on immediately.
Switching off the unit: Pull the power plug of the power pack.
OASE GmbH
Tecklenburger Straße 161
48477 Hörstel | Germany
+49 (0) 5454 80-0
+49 (0) 5454 80-9353
info@oase.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>