ECOFLOW DELTA Pro Portable Power Station User Manual
- June 6, 2024
- ECOFLOW
Table of Contents
EcoFlow DELTA Pro
User Manual
DISCLAIMER
Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the terms of use and disclaimer at https://ecoflow.com/pages/terms-of-use and stickers on the product before use. Users take full responsibility for all usage and operations. Familiarize yourself with the related regulations in your area. You are solely responsible for being aware of all relevant regulations and using EcoFlow products in a way that is compliant.
Specifications
General Info
Net Weight | Approximately 99lbs |
---|---|
Dimensions | 25×11.2×16.4in |
Capacity | 3600Wh, 48V |
Certification | cTUVus FCC Telec |
Wi-Fi | Supported |
Bluetooth | Supported |
Output Ports
AC (x5) | Pure Sine Wave, 3600W total (surge 7200W), 120V~ (60Hz) |
---|---|
USB-A (x2) | 5V 2.4A, 12W Max per port |
USB-A Fast Charge (x2) | 5V 2.4A 9V 2A 12V 1.5A, 18W Max per port |
USB-C (x2) | 5/9/12/15/20V 5A, 100W Max per port |
Car Charger | 12.6V 10A, 126W Max |
DC5521 Output (x2) | 12.6V 3A, 38W Max per port |
Anderson Output | 12.6V 30A, 378W Max |
- A car charger shares power with the DC5521 output port, offering a maximum output of 126W.
Input Ports
AC Charge | LFP |
---|---|
AC Input Voltage | 1 year (after a full charge) |
Solar Charger | 3500 cycles to 80%+ capacity |
Car Charger
Battery Info
Cell Chemistry | LFP |
---|---|
Shelf Life | 1 year (after a full charge) |
Cycle Life | 3500 cycles to 80%+ capacity |
Protection | Over Voltage Protection, Overload Protection, Over Temperature |
Protection, Short Circuit
Protection, Low Temperature Protection, Low Voltage Protection, Overcurrent
Protection
Environmental Operating Temperature
Optimal Operating Temperature | 68°F to 86°F |
---|---|
Discharge Temperature | 14°F to 113°F |
Charge Temperature | 32°F to 113°F |
Storage Temperature | 14°F to 113°F( optimal: 68°F to 86°F ) |
- Whether the product can be charged or discharged depends on the actual temperature of the battery pack.
Add-ons (sold separately)
DELTA Pro Smart Extra Battery | Up to two units |
---|---|
EcoFlow Smart Generator | |
DELTA Pro Remote Control | Wired or wireless |
Double Voltage Hub | |
EV X-Stream Adapter | Charge from electric vehicle charging |
Safety Instructions
Usage
- Do not use the product near a heat source, such as a fire source or a heating furnace.
- Avoid contact with liquids of any kind. Do not use in the rain or high humidity.
- Do not use around strong static electricity or magnetic fields.
- Do not disassemble in any way or puncture.
- Avoid using wires or other metal objects that may result in a short circuit.
- Do not use third-party components or accessories. Consult official EcoFlow channels if you need to replace any component or accessory.
- When using the product, please strictly follow the operating environment temperature specified in this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature is too low, the product performance may be severely reduced, or the product may cease to work.
- Do not stack any heavy objects on the product.
- Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.
- Ensure the product is not hit, dropped, or heavily vibrated. Securely fasten the product when transporting to avoid damage. If severely damaged, turn off the power source immediately and discontinue using the product.
- If you accidentally drop the product into water during use, please place it in a safe open area, and stay away from it until it is completely dry. The dried product should not be used again, and should be properly disposed of according to Section 2.2 below. If the product catches fire, we recommend that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and finally a carbon dioxide fire extinguisher.
- Only clean the ports with a dry cloth.
- Place on a flat surface to keep the product from falling over. If the product is overturned and severely damaged, turn it off immediately, place the battery in an open area, keep it away from people and combustibles, and dispose of it in accordance with local laws and regulations
- Keep out of reach of children and pets.
Disposal Guide
1. When possible, fully discharge the battery before disposing it. Because it
contains hazardous chemicals, only dispose of the battery in designated
recycling channels and never with ordinary trash. Consult your local laws on
battery recycling and disposal.
2. If the battery cannot be fully discharged due to product failure, contact
a professional battery recycling company for further processing.
3. Please dispose of batteries that no longer recharge.
Getting Started
Product Details
LCD Screen
Battery Level Indicator:
The ring will fill up while charging. If the product is at 0% charge, the ring
will flash
Wi-Fi Status:
After the IOT button has been pressed for 3 seconds, the Wi-Fi icon will flash
to indicate the product is ready for pairing. Connect the product with the
app, either (1) by finding the product on your phone’s Wi-Fi connections or
(2) by connecting the product to the internet. If the former, the icon will
keep flashing; if the latter, the icon will not flash.
Error Code:
Refer to the EcoFlow app for specific error codes.
Carbon Monoxide Alert:
Appears whenever a connected EcoFlow Smart Generator automatically shuts
off after detecting unsafe carbon monoxide levels.
- See Section 5 for more troubleshooting steps.
General Product Usage
Product On, Product Off, LCD Screen On
Short press the Main Power Button to turn on the product; the LCD Screen will
light up and the battery level indicator icon will display.
The product enters sleep mode after 5 minutes of idle operation; the LCD
Screen will automatically turn off. When the product senses any load change or
operations, the LCD Screen will automatically light up. To turn the LCD Screen
on or off, please short press the Main Power Button.
To power off the product, press and hold the Main Power Button.
The default product standby time is 2 hours. With other Power Buttons turned
off and no other load access for 2 hours, the product will automatically shut
down. The standby time can be set on the APP.
12V DC Output Port
With the Main Power Button turned on, short press the 12V DC Power Button to
use the 12V DC Output port. Short press the 12V DC Power Button again to turn
it off.
With the 12V DC Power Button on, the product will not automatically shut down.
AC Output Port
With the Main Power Button turned on, short press the AC Power Button to use
the AC Output ports. Short press the AC Power Button again to turn it off.
The default standby time of the AC Output port is 12 hours. Without any load
access for 12 hours, the AC Power will automatically turn off.
Please turn off AC power button when not in use to save power consumption.
AC Charging
EcoFlow’s X-Stream fast charge technology is specifically for AC charging, offering 1800W of max input power. You can control the charging power through the AC Charge Speed Switch. The default max input power for the AC charging speed is 400W, which can be modified in the EcoFlow app. In case of unusual situations where the AC input current remains higher than 20A, the X-Stream charging input port will initiate a self-protection function, and the Overload Protection Switch on the product will automatically pop up. After confirming that there is no product failure, you can press the Overload Protection Switch to resume charging.
The charging power can be adjusted through the AC Charge Speed Switch on the
back of the product. You can set the charging power range in the EcoFlow App.
Please use the AC Charging Cable included in the package for fast charging. Do
not use other cables to charge. Plug directly into an AC wall outlet and make
sure that the wall output current is more than 15A. Otherwise, reduce the unit
charging speed with the AC Charge Speed Switch. EcoFlow takes no
responsibility for any consequences caused by failures to follow instructions,
including but not limited to charging with other AC charging cables. 7
Solar Charging
Users can connect solar panels in series as shown in the figure to recharge the product. The product supports 11-150V DC input, 15A max current, and 1600W max charging power.
When using an EcoFlow solar panel to charge the product, please follow the
instructions that come with the solar panel.
Before connecting the solar panel, please ensure that the solar panel’s output
voltage is within 150V to avoid product damages.
Car Charging
Users can recharge the product through the Car Outlet. It supports 12V/24V car chargers and an 8A default charging current.
Please charge using the car charger after you’ve started the car to avoid failure to start due to insufficient car battery. In addition, please make sure that the cigarette lighter of the Car Outlet and the Car Charger Input Cable are in good condition. EcoFlow takes no responsibilities for any losses or damages caused by failures to follow instructions.
**Using Smart Extra Battery
**
A single DELTA Pro can link with up to two Smart Extra Batteries at once for
added capacity. Refer to the user manuals of the Smart Extra Battery and Smart
Generator for detailed instructions.
Precautions:
- Turn off both the Smart Extra Battery and DELTA Pro before connecting or disconnecting them.
- Before using, make sure both DELTA Pro and Smart Extra Battery display the extra battery icon on their screens.
- Turn of the Smart Battery before connecting or disconnecting it.
- Do not touch the metal terminals of the Smart Extra Battery connector. If the metal terminals need to be cleaned, gently wipe them with a dry cloth.
APP
The EcoFlow App gives users the ability to control and monitor EcoFlow power
stations remotely.
Read the EcoFlow App user guide and access the download link here:
https://ecoflow.com/pages/ecoflow-app
https://ecoflow.com/pages/ecoflow-app
Privacy Policy
By using EcoFlow Products, Applications and Services, you consent to the
EcoFlow Term of Use and Privacy Policy, which you can access via the “About”
section of the “User” page on the EcoFlow App or on the official EcoFlow
website at https://ecoflow.com/pages/terms-of-use and
https://ecoflow.com/pages/privacy-policy
X-Boost
With EcoFlow X-Boost technology, the product can power a 4500W Max device while the rated output power remains 3600W, avoiding operation failure due to overload protection.
X-Boost Tips:
- X-Boost is not available when the AC output is turned on in a recharging state (in bypass mode).
- X-Boost is not applicable for all electrical appliances; it’s incompatible with appliances with strict voltage requirements and a rated power over 3600W. Appliances with voltage protection (such as precise instruments) are not supported. X-Boost mode is more suitable for heating devices. Please conduct your own tests with your devices with X-Boost enabled.
Emergency Power Supply (EPS)
The product supports EPS. When you connect the grid power to the AC Input Port
of the product through an AC cable, you can power electrical devices through
the AC Output Port (AC power will come from the grid and not the power station
in this situation). In case of a sudden blackout, the product can
automatically switch to the battery powered supply mode within 30ms. As a
basic UPS function, this function does not support 0ms switching. Please do
not connect the product to any device that requires 0ms UPS, such as data
servers and workstations. Please test and confirm the compatibility before
using the product. We recommend that you only charge one device at a time and
avoid using multiple ones at the same time to avoid overload protection.
EcoFlow takes no responsibilities for any device failures or data losses
caused by failures to follow instructions.
FAQs
-
What battery does the product use?
It uses high-quality LFP battery. -
What devices can the product’s AC output port power?
With 3600W rated power and 7200W peak power, the product’s AC output port can power most household appliances. Before you use it, we recommend that you confirm the power of the appliances first and ensure the power sum of all loaded appliances is lower than the rated power. -
How long can the product charge my devices?
The charging time is shown on the product’s LCD Screen, which can be used to estimate the charging time of most appliances with stable power usage. -
How can I know if the product is charging?
When it’s charging, the remaining charging time will be shown on the LCD Screen. Meanwhile, the charging indicator icon begins to rotate with the remaining battery percentage and the input power shown on the right of the circle. -
How to clean the product?
Please gently wipe it with a dry, soft, clean cloth or paper towel. -
How to store the product?
Before storing, please turn off the product first, and then store it in a dry, ventilated place at room temperature. Do not place it near water sources. For long-term storage, please discharge the battery to 30% and recharge it to 60% every three months to extend its battery life. -
Can I bring the product on a plane?
No.
Troubleshooting
Indicator| Problem|
Solution
---|---|---
OVERLOAD (Flashing)|
SB-A Overload Protection
|
Resume normal operation by removing the electrical device connected to the USB-A port.
OVERLOAD (Flashing)|
USB-C Overload Protection
|
Resume normal operation by removing the electrical device connected to the USB-C port.
(Flashing)|
USB-C
High Temperature Protection
|
After the product cools down, it will resume normal operation automatically.
RECHARGING TIME On (Flashing)|
High Temperature
Charge Protection
|
Charging can be resumed automatically after the battery cools down.
(Flashing)|
High Temperature
Discharge Protection
|
The power supply can be resumed automatically after the battery cools down.
RECHARGING TIME (Flashing)|
Low Temperature
Charge Protection
|
Charging can be resumed automatically after battery temperature rises above 41°F.
(Flashing)|
Low-Temperature
Discharge Protection
|
The power supply can be resumed automatically after the battery temperature rises above 10°F.
60Hz OVERLOAD (Flashing)|
AC Output
Overload Protection
|
Normal operation will be resumed automatically after you remove the overloaded
device and restart the product.
Electrical appliances should be used within rated power. (Refer to X-Boost
instructions to get more details about power limitations).
60Hz (Flashing)|
AC High
Temperature Protection
|
Please confirm whether the fan inlet and outlet are blocked, if not, normal operation will be resumed automatically after the product temperature drops.
60Hz **** (Flashing)|
AC Low
Temperature Protection
|
Normal operation will be resumed automatically after the product is used at optimum environmental temperatures.
(Flashing)|
Fan Blockage
|
Please check if the fan is blocked by foreign materials.
OVERLOAD (Flashing)|
Car Charger
Overload Protection
|
The product will resume normal operation automatically after you remove the device connected to the car charger.
(Flashing)|
Car Charger High
Temperature Protection
|
After the product cools down, it will resume normal operation automatically.
(Stays On)|
Battery Failure
|
Contact EcoFlow Customer Service
If the Alarm Prompt shows on the product LCD screen during use and does not disappear after a restart, please stop using it immediately (do not try to charge or discharge). If you require any other assitance, please contact EcoFlow Customer Service.
What’s In the Box
Storage & Maintenance
- Ideally, use and store the product between 68°F to 86°F, and always keep it away from water, intense heat, and sharp objects. Do not store in emperatures above 113°F or below 14°F for an extended period.
- Storing a battery with a low charge for a long period shortens its lifespan. DELTA Pro mitigates the damage by putting the battery into hibernation mode. To get the most out of the battery, make sure it is about 60% before putting DELTA Pro into long-term storage, and then once every three months, discharge the battery to 30% and recharge it back to 60%.
References
- EcoFlow - POWER A NEW WORLD | EcoFlow US
- download.ecoflow.com/app
- EcoFlow
- EcoFlow Downloads | EcoFlow App, Manuals & More | EcoFlow US
- Privacy Policy - EcoFlow
- Terms of Use | EcoFlow
- Download Center – EcoFlow Europe
- EcoFlow - POWER A NEW WORLD | EcoFlow US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>