EFFYDESK Home Frame 2022 Height-Adjustable Electric Standing Desk Instruction Manual
- June 5, 2024
- EFFYDESK
Table of Contents
EFFYDESK Home Frame 2022 Height-Adjustable Electric Standing Desk
Technical Data
Segment Column | 2 | Input Voltage | 110-240V |
---|---|---|---|
Maximum Load | 2401bs | Speed | 30mm/s |
Recommend Load | < 220 **lbs** | Certification | UL |
Height Range | 710-1160mm |
Accessory List
Tool Required
Parts List
Thank you for your order!
If you have any issues with your product, please feel free to contact us via
team@effydesk.ca or
info@effydesk.ca We will help you resolve the issue
as soon as possible.
For more information, please visit https://effydesk.ca/pages/how-to-assemble-
your-height-adjustable-standing-desk
STEP 1
Separate the Crossbar and you will find the Crossbar Rail inside
STEP 2
Insert one of the Crossbar Ends into the one of the Lifting Columns and
secure with screws. Repeat the same step for the other Lifting Column.
**STEP 3 **
Attach the Side Bracket to one of the Lifting Columns. Repeat the same step
for the other Lifting Column.
**STEP 4 **
Slide the two Crossbar Ends back into the Crossbar Rail. Please make sure
to fit the slots as shown below.
**STEP 5 **
Attach both Feet to the bottom of the Lifting Columns.
STEP 6
STEP 7
Connect all the cables to the Control Box .
**STEP 8 **
Firmly secure the Crossbar with Screws (A) and attach the Keypad with
Screws (F) to the tabletop.
**STEP 9 **
Plug the cable from the Keypad into the Control Box and flip the table onto
its feet.
Prepare for First-time Use
Prepare for First-time Use
Before plugging in the table, make sure that
- The Lifting Columns are level and set at their lowest position.
- All the screws are tightened to avoid the desk becoming wobbly.
- There is no object above or beneath the desk within its range of movement as it may result in physical damage.
Calibrate the desk by following the steps below:
- Please press the Down button and hold for 10-15 seconds until the table stutters and beeps.
- Release the button. Your desk is ready to use!
Operation Guide
Program Presets
-
Adjust the table to the desired height, then press M.
“S-“ will flash on the display. -
Press a number to set the desired height as a preset.
Advanced Safety Feature: Lock and unlock the table
- Press the Up and Down buttons at same time for 5 seconds, until “LOC” appears on the display.
- All buttons will be inactivated and no change can be made.
- Press the Up and Down buttons together again to unlock the Keypad and all of the table’s features.
Set Maximum Height Limit
- Raise the desk to the desired maximum height
- Press M and the Up button together for 5 seconds until you hear a beep. This sets the maximum height limit.
Set Minimum Height Limit
- Lower the desk to the desired minimum height.
- Press M and the Down button together for 5 seconds until until you hear a beep. This sets the minimum height limit.
Changing from centimetres to inches
- Press M for 10 seconds, the Keypad will display “1-1”.
- Press the Down button and it will change to “1-0”.
- Press M for 10 seconds to lock the setting.
Reset the table
When an error code or “RST” appears on the display, please reset the table.
- Unplug the power cord from the Control Box.
- Unplug the cable that connects the Keypad to the Control Box.
- Wait 30 minutes and plug all the cables back in again.
- Press the Down button and hold for 10-15 seconds until the table stutters and beeps.
If“HOT” appears on the display
- Please unplug and replug and let it cool off for a couple of minutes before proceeding.
If you have any questions, please contact us at
team@effydesk.ca or
info@effydesk.ca
www.effydesk.ca