Simer 4075SS-01 Automatic Booster Pump Owner’s Manual

June 5, 2024
Simer

Simer 4075SS-01 Automatic Booster Pump

Simer-4075SS-01-Automatic-Booster-Pump-PRODUCT

IMPORTANT SAFETY INFORMATION & WARNINGS

Do not operate the equipment before studying the Quick Start and Safety Guide and the User Guide. Make sure that the Quick Start and Safety Guide is always accessible to the user! Profoto products are intended for indoor condition use!

Caution:  Possibly hazardous optical radiation emitted from lights and flashes. Do not stare at the operating lamp. May be harmful to the eye. Do not use flashes or lights too close to persons. Do not trigger a flash towards an unexpected subject, any person operating heavy equipment, or anyone performing any other activities where an unexpected flash could cause injury or harm. Please note that flashes can be triggered remotely from a long distance.

Quick start

Simer-4075SS-01-Automatic-Booster-Pump-
FIG-1

  • Before using your product for the first time it needs to be registered and updated. Scan this QR-code or go to profoto.com/setup for additional instructions.

Credit

App Store is a trademark of Apple Inc., registered in the U.S. and other countries and regions. Google Play and the Google Play logo are trademarks of Google LLC. HUAWEI and AppGallery are trademarks of Huawei Technologies Co., Ltd registered in China and other countries. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Profoto is under license. Other trademarks and trade names are those of their respective owners.

Regulatory information

Regulatory information, certification, and compliance mark specific to Connect Pro is available on the unit. It can be found both on the products type label and in the settings menu. Go to Settings > Advanced > Regulatory info , to display the electronic label (e-label).

Final Disposal

When the product reaches the end of service, do not dispose of it with your other household waste. Equipment contains batteries, electrical and electronic components that could be harmful to the environment. Equipment may be returned to Profoto distributors free of charge for recycling. Follow local legislation for disposal of batteries, electrical and electronic components, respectively.

EU Declaration of Conformity

Hereby, Profoto Aktiebolag declares that the Profoto Connect Pro is in compliance with Directive 2014/53/ EU. The full text of the EU declaration of conformity can be found at https://profoto.com/int/support/declarationof- conformity

UK Declaration of Conformity

Hereby, Profoto Aktiebolag declares that the Profoto Connect Pro is in compliance with Radio Equipment Regulations 2017. The full text of the U declaration of conformity can be found at https://profoto.com/int/support /declaration-of-conformity

  • UK Importer: Profoto Ltd.
  • Lytchett House, 13 Freeland Park, Wareham Road,
  • Poole, Dorset, BH16 6FA, UK

USA and Canada

FCC Suppliers Declaration of Conformity (SDoC)

  • Profoto Aktiebolag
  • Transmitter / Receiver
  • MODEL: PCA5537
  • PRODUCT NO: PCA5537-0000
    • PCA5537-0010
    • PCA5537-0020
    • PCA5537-0030
    • PCA5537-0050
    • PCA5537-0060
  • FCC ID: W4G-PCA5537
  • IC: 8167A-PCA5537

Designed in Sweden, and manufactured in Thailand.

Responsible Party – U.S. Contact Information

Note about RF and RF Exposure Information

This equipment makes use of the radio spectrum and emits radio frequency energy. Make sure the device is operated according to the local regulations. The frequency spectrum this device is using is shared with other users. Interference cannot be ruled out. Regulations change from time to time, so please make sure you are using the latest firmware and instructions to ensure compliance with rules and regulations. These can be downloaded free from Profoto.com.

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment as the distances between the human body and the antennas of the device during normal operation are sufficient. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized.M This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

  1. this device may not cause harmful interference.
  2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications made to this equipment not expressly approved by Profoto may void the FCC authorization to operate this equipment.

Class B digital device notice

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Technical specifications

  • Model name: PCA5537
  • Type: PCA5537-0000
    • PCA5537-0010
    • PCA5537-0020
    • PCA5537-0030
    • PCA5537-0050
    • PCA5537-0060
  • Input power supply: 3xAAA batteries required (Alkaline, Lithium or NiMH), 3.0-6.0 VDC
  • Operating temperatures: 0°C to +30°C/+32°F to +86°F
  • Operating Frequency and Radio output power (Air and BluetoothLowEnergy): 2402-2480 MHz, < 20dBm EIRP (中 < 10dBm)

Batteries are sold separately.

  • Manufacturer: Profoto Aktiebolag
  • Adress: Box 1264, SE-172 25 Sundbyberg, Sweden

Profoto ABSweden

Technical data and product information are subject to change without notice.PGM0025-0000 A3. March 2022. Printed in Sweden

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Simer User Manuals

Related Manuals