Sentry HO344 Balls In-Earbuds, Blue Complete Features

: June 5, 2024
: Sentry

Table of Contents

Sentry

Sentry

Sentry HO344 Balls In-Earbuds, Blue

Sentry-HO344-Balls-In-Earbuds-Blue

Specifications

BRAND: Sentry Industries Inc.
EAR PLACEMENT: In Ear
COLOR: Blue
CONNECTIVITY TECHNOLOGY: Wired
MODEL NAME: HO344
COMPATIBILITY: iPods, MP3 players, CD, DVD, gaming, computers, laptops
FREQUENCY: 20Hz-20kHz
IMPEDANCE: 32 Ohms
PLUG: 3.5mm stereo
CORD LENGTH: 3.5 foot
SPECIAL FEATURES: foldable, lightweight
PRODUCT DIMENSIONS: 1.5 x 1.5 x 7.5 inches
ITEM WEIGHT: 0.96 ounces

Introduction

The Sentry Headart extreme folding headphones come in ten stylish colors and fold flat for easy storage in handbags, backpacks, and other small locations. For the on-demand pleasure of iPods, MP3 players, and other devices, the headphone’s on-the-ear light and comfy ear-pads are attached to a stylish 4 foot long chord with a 3.5mm audio connector.

HOW TO PUT ON EARBUD PADS

To keep the earbud stationary, hold the back with your non-dominant hand. With your thumb and index finger, pinch the earbud’s top. The connector holding your earbud tip in place should feel like a thin piece of hard plastic below.

HOW TO FIX EARBUDS WHEN ONLY ONE SIDE IS WORKING

Make the earphone cord straight.
Attempt a different set of earbuds.
Make the headphone jack clean.
Restart the apparatus.
Check the audio settings on the device.
Examine the earphone cables for damage.

HOW TO CONNECT TO IPHONE

Connect the opposite end of the Lightning to 3.5 mm Headphone Jack Adapter to your headphones and the Lightning port on your iOS smartphone.

HOW TO KNOW IF HEADPHONE JACK IS WORKING

Click Sounds from the context menu by selecting the sound symbol in the lower-right corner of your computer screen.
To ensure Headphones (or Speakers/Headphones, as seen below) is checked, click the Playback tab, unplug and then replug your headphones into the headphone port, and then click OK.

HOW TO GET COMPUTER TO RECOGNIZE EARBUDS

Right-click the Start button.
To access Hardware and Sound, click.
Locate the Playback tab, then right-click the window underneath it and choose Show Disabled Devices.
There are headphones mentioned, so right-click on your choice and choose Enable.

HOW TO ENABLE FRONT PANEL JACK DETECTION

Right-click the Start button.
To access Hardware and Sound, click.
Locate the Playback tab, then right-click the window underneath it and choose Show Disabled Devices.
There are headphones mentioned, so right-click on your choice and choose Enable.

HOW TO TEST AUDIO JACK

Remove any connected equipment from the jack you want to test.
You should insert the testing equipment into the jack.
In the device you’re using, turn on any power switches before clicking the “Start Recording” button.
Record sound until the sound recorder’s counter reads around 1:00. (one minute).

Frequently Asked Questions

What is the purpose of the button on wired earbuds?

The in-line controls may also include capabilities just for using your phone to answer incoming calls. You can answer a call by tapping a button, which typically causes your music or another audio app to pause or stop playing for the duration of the call.

Why won’t my left earbud work?

When your left earphone quits working, you should examine the cable as soon as possible. You may check the tiny cable of your earphones by plugging them into your smartphone and repeatedly bending the cable with your fingers to look for any potential cable breaks.

What occurs if wired headphones malfunction?

Check your wired headphones for physical damage. You might not be able to hear sounds from your headphones if the audio jack is damaged or broken, the wire is exposed, or both. Verify the condition of your audio jack. Check to see if your cable is broken.

Why won’t my iPhone recognize my wired headphones?

Your iPhone may not recognize plugged-in headphones if there is lint, grime, or other material in the headphone jack. If your iPhone’s headphone jack isn’t functioning, clean it out with a fresh toothbrush or an anti-static brush.

Without Bluetooth, how can I connect my wired headphones to my iPhone?

This adapter connects to the Lightning port on your iPhone and terminates in a 3.5mm headphone jack (the exact same type that was previously built into the iPhone). The majority of wired headphone pairs can be immediately connected to your iPhone using this adaptor.

Why won’t my laptop recognize my wired earbuds?

Or, it can result in your laptop completely failing to detect your headphones. Make sure that wired headphones are plugged into the correct port; most headphones have a symbol or color code that can be used to identify the correct port and plug.

Why won’t my microphone work?

Check your device’s sound settings to see if the call or media volume is extremely low or muted. If so, all you need to do is turn up your device’s media and call volume. As was already said, dust particles can gather and easily clog your device’s microphone.

The wired earphones’ mic is located where?

The majority of our wired headphones (including those with microphones) have a 3.5mm jack connection known as a “TRRS” connector. View a sample image below. The Mic Input is located at the bottom of the jack, if you’ll notice.

Why won’t my wired headphones pair?

The jack and the headphones’ connection could be obstructed by dust, lint, and debris. To remove the lint and dust from the jack and check for this, use a cotton swab dampened with some rubbing alcohol, or if you have access to one, use a can of compressed air. Reconnect the headphones to verify if they function.

How do I switch my audio equipment?

On the player notification tile, tap the tiny button in the upper right corner. You will see a list of connected audio devices in the media player pop-up. If you want to swap, tap that option.