Signature Streetscapes SBA-1 Scroll Bracket Arm Installation Guide
- June 5, 2024
- Signature Streetscapes
Table of Contents
Signature Streetscapes SBA-1 Scroll Bracket Arm
INSTALL SCROLL BRACKET ARM
Thank-you for purchasing our products. We appreciate your business. The
decorative sign attachment bracket you’ve purchased is designed for maximum
durability and has been pre-assembled to assure a high quality product. Follow
these instructions only after the sign pole is installed and concrete is fully
cured.
CAUTION: The cast aluminum, ornamental scroll that is welded to the
collar hanger arm is very fragile. Hitting or dropping the bracket can easily
break the casting. Use care when handling the bracket to assure is does break.
ATTACH STREET BLADE TO BRACKET Loosen (4) 1/4-20 x 3/8” set screws. Insert street blade into channel. Be sure blade is completed seated into channel then tighten (4) 1/4-20 set screws to secure blade
DRILL BOLT THROUGH HOLES IN POLE
Poles may be drilled for bolt-thru attachment before or after installing pole in-ground. Use bracket to mark hole locations. Drill thru one side of pole with 3/8” drill bit. Measure to center of top hole. Mark opposite side of pole at the same height and drill holes.
ATTACH SCROLL BRACKET ARM TO POLE
Use 5/16-18 stainless steel hex bolts, nuts & washers provided to attach
scroll bracket arm to pole. Tighten securely.
Repeat steps 2 & 3 for second street blade attachment. NOTE: be sure to offset
bracket height at least 1” to avoid a bolt collision on inside of pole.
CLEAN COMPONENTS
Clean the completed installation using glass cleaner and a lint-free cloth to remove debris and finger prints
Contact Us
signaturestreetscapes.com
1-800-705-1446
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>