CORAL JA1 Wireless Add On Accessory Board for Dev Board Micro User Manual
- June 5, 2024
- CORAL
Table of Contents
CORAL JA1 Wireless Add On Accessory Board for Dev Board Micro
The regulatory information, certification, and compliance marks can be found
on your device.
Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA,
94043
Importer of Record: For contact information for the importer for your region,
see coral.ai/legal/
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Google could void your
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Radio Frequency Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operated with any other antenna or transmitter.
This module is intended for OEM integrators only. For additional FCC
information, see coral.ai/legal/
EU Declaration of Conformity
Google LLC hereby declares device model JA1 is in compliance with Radio
Equipment Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at coral.ai/legal/
UKCA Declaration of Conformity
Google LLC hereby declares device model JA1 is in compliance with Radio
Equipment Regulations 2017. The full text of the UKCA declaration of
conformity is available at coral.ai/legal/
Restrictions and Requirements per RED
The device is restricted to indoor use only when operating in the 5150 to 5350
MHz frequency range for member states: AT, BE, BG, CY, CZ, DE, DK, EE, ES, FI,
FR, GR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PO, PT, RO, SE, SI, SK, UK (NI),
(CH, IS, LI, NO), (TR).
Information on Frequency Bands and Power
Data given here is the maximum RF power transmitted in the frequency band(s)
in which the radio equipment operates.
WiFi:
- 2412-2462MHz (Max 18 dBm),
- 5180-5240MHz (Max 16 dBm),
- 5260-5320MHz (Max 16 dBm),
- 5500-5720MHz (Max 16.5 dBm),
- 5745-5825MHz (Max 16 dBm).
Bluetooth:
- 2402-2480MHz (Max 6 dBm).
The European Union Waste Electrical and Electronic Equipment (WEEE)
Directive
Your Wireless Add-on is marked with the symbol of the crossed–out wheeled bin,
which means the equipment should be disposed of separately from household
waste. When this product reaches its end of life, take it to a collection
point designated by local authorities for safe disposal or recycling. The
separate collection and recycling of your product and its electrical
accessories will help conserve natural resources, protect human health, and
help the environment.
Recycling, E-waste Management and Handling
Your Wireless Add-on is marked with the symbol of the crossed–out wheeled bin.
This label indicates that this product should not be thrown away with
household waste. It should be deposited at an appropriate facility to allow
recovery and recycling. Google declares that your Wireless Add-on has been
designed and manufactured in compliance with E-Waste (Management) Rules, 2016
(hereafter “the Rules”), and is specifically in compliance with Rule 16 (1) on
the reduction in the use of hazardous substances in the manufacture of
electrical and electronic equipment and their maximum allowed concentrations
by weight in the homogeneous materials (except for the exemptions listed in
schedule II). Improper handling, disposal, accidental breakage, damage or
improper recycling of e-waste may present risks, including, but not limited
to, fire, explosion and/ or other hazards and uncontrolled waste disposal
which may be detrimental to/ have adverse effects on the environment as it
prevents reuse of resources. Some e-waste may contain hazardous chemicals
which, if disposed improperly, may make water, soil and other natural
resources toxic. Improper disposal may cause harm to plant, animal and human
life.
REACH
Google complies with the REACH (Registration, Evaluation, Authorization and
Restriction of Chemicals, EC No 1907/2006) regulation and your Wireless Add-on
does not contain any Substances of Very High Concern (SVHCs) beyond the limits
of this regulation. For information, contact Google at coral-
compliance@google.com.
Hazardous Applications Prohibited
The Wireless Add-on is not designed, recommended or authorized for any of the
following applications: high-risk applications such as safety, life support,
surgical implant, nuclear, or aircraft applications, or for any use or
application in which the failure of a single component could cause substantial
harm to persons or catastrophic property loss; or for any military or weaponry
use, including but not limited to chemical, nuclear, biological, aircraft,
missiles, and similar military applications.
Safety Warning Notice
To reduce the possibility of heat-related injuries or of overheating your
Wireless Add-on, do not place it near heat sources such as radiators or stoves
and do not cover it with soft surfaces, such as pillows, rugs or clothing.
Also, do not allow the Wireless Add-on to contact the skin or flammable
materials during operation.
If you have safety concerns or notice crackling, hissing, popping, or a strong
odor or smoke coming from your Wireless Add-on, do not use it. Turn off your
Wireless Add-on, disconnect it from its power source, and contact technical
support for assistance.
- Note 1 – “Exceeding 0.1% weight” and “exceeding 0.01% weight” indicates the percentage of the restricted substance exceeds the reference value.
- Note 2 – “○” indicates the percentage of the restricted substance does not exceed the reference value.
- Note 3 – “－” indicates the restricted substance is exempt.