Coral Vision Wireless Apple CarPlay Dashboard Console Instruction Manual
- June 5, 2024
- Coral Vision
Table of Contents
Coral Vision Wireless Apple CarPlay Dashboard Console
Suction Cup Stand Assmbly Instruction
Step 1 : Take out CarPlay host/ Suction Cup stand/ Glass plate
Please check if there are the above-mentioned items in the box
Step 2: Check the stand and the back of the host
check the mortise of the host and the tenon of the stand. Align the mortise,
then assemble them and make a ‘click’ sound (please refer Step 3 to assemble
it)
Step 3: How to easily assemble
Please refer to Figure 1 and Figure 2 to align and combine the stand and the
host It makes the combination easily.
Note: there must be a ‘click’ sound to confirm the assembly completed.
The host may fall while using it if there is no ‘click’ sound.
Suction cop direction can be turned after assemble. And the direction depends
on your install position (windshield or consle). Please use the glass plate if
you install the hist no the console.
(It’s a bit tight during the first assembly. Remind you to assemble them with
two hands.)
(When you remove the stand. the gesture is the same as Fig.1,just upside down
the host.)
Step 4: Install the suction cup (two stage button)
When installing the suction cup stand, please note after the suction cup
attached to the glass, be sure to press the button to the second stage. The
host may fall and damage if the suction cup is not fully buckled.
Step 5 : Installation position samples
The method of sound output
Internal 3W high-quality speaker: It is excellent for navigation, phone,
and voice messages.
(The internal speaker output of the other navigators is 0.5~ 1 W.)
FM transmitter: This is a simple way to output audio from a car stereo.
Due to the local FM radio channel allocation of various regions, suggest you
use an empty channet to avoid noise and interference
Audio Aux out: To get the perfect CarPlay sound output from the car
stereo, We suggest using
‘Audio Aux out’.
Please check the connection below.
Note Please use TRS type audio cable (3 contacts).
