TROTRONICS TT-DL060 LED Floor Lamp User Guide
- June 6, 2024
- TROTRONICS
Table of Contents
TROTRONICS TT-DL060 LED Floor Lamp
Product Diagram
- Lamp Head
- Gooseneck
- Control Panel
- Power Socket
- Pole Section #3
- Pole Section #2
- Pole Section #1
- Base
Assembly and Disassembly
Note:
- When connecting the sections, rotate in opposite directions with both hands and do not screw with too much force.
- You can choose to use different numbers of sections for different purposes and scenes. To disassemble, follow the assembly steps as above in the reverse order.
How to Use
- Brightness Indicator
- Color Temperature Button
- Brightness +
- Brightness –
- Power Indicator
- Power Button
Standby Mode
Connect the lamp to a power source and it will enter standby mode. The Power
Indicator on the Power Button will light up in blue.
Power On / Off
Tap the Power Button to turn the lamp on / off.
Color Temperature / Brightness Adjustment
Tap the Color Temperature Button to cycle through 5 color temperature
settings. Tap the Brightness + / – Button to adjust the brightness.
Adjust the Lamp Head
Note: Please do not turn the lamp head for over 180° to avoid damaging the
gooseneck.
Thank you for choosing the TaoTronics TT-DL060 LED Floor Lamp. If you have any questions or concerns, please contact our customer support team by email at support@taotronics.com.
Specifications
| Model | TT-DL060 |
|---|---|
| Light Source | LED |
| Operate Voltage | DC 12V 1.5A |
| LED Power | 12W |
| Color Temperature | 3000K – 6500K |
| Lumens | 780 lm max |
| Ra | > 80 |
Caution
- Please do not dismantle the product by yourself, always ask a professional electrician or authorized technician for repairs.
- If you smell a bad odor or anything unusual, please turn off the unit immediately.
- Please do not remove the power cable with wet hands as it may cause an electric shock.
- Do not put this unit near extreme heat sources, moisture, or corrosive substances.
- Clean the lamp with a dry cloth when needed.
- Please store the lamp in a dry and shady place if not being used for a long period of time.
- Use the original power adapter to power the lamp. A wrong input may damage the lamp.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must withstand any interference received, including interference that may cause undesired operation. support.uk@taotronics.com(UK)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>