tebarra Army Series Pro Smartwatch User Manual

tebarra Army Series Pro Smartwatch

Watch client download

• Scan the QR code below to download and install the watch client.

Watch charging and activation

• It can be activated by charging before using the watch for the first time;
• The magnetic charger used is attached to the metal contact on the back of the watch, and the other end of the charging cable is connected to the 5V1A USB charging head or computer USB interface.

Connect the watch

• Open the mobile client to set personal information.
  • Open the mobile client to set personal information.
• Click your device in the list of scanned devices.
  • Complete binding
• Go to Watch-Settings-About, check the MAC address of the bracelet, and you can determine your device by the MAC address in the device list:
  • After the watch is successfully bound, every time the client is opened in the future, the watch will automatically connect with the mobile phone, and the data can be synchronized by pulling down the client data page.

Dial setting

• Press and hold the dial interface for 1.5 seconds to switch the dials of different styles in the watch; After the B~u1etooth conn 1eieUon i.s success,f’u l, you 1can enter APP- Dial Selection-Custom Dial; Af·terthe B~u1eiooth conn 1eieHon is s,ucces,s,fu l, you can go to AIPP~ Dia.I Selection~IMore Dial Selection.

Daily data

• You can record the total number of steps in the day, the number of walking steps, calories, exercise duration and other data in each period of the day.
• More detailed data can be viewed in the mobile APP;

Sleep monitoring

• You can record and display the total sleep duration and the duration of deep sleep and shallow sleep.
• More detailed information analvsis data records can be viewed on the mobile APP;

Heart rate monitoring

• Before monitoring the heart rate, first make sure that the watch is properly worn on the wrist (the best position is one finger wide above the wrist bone). For the heart rate detection, it is required to wear it tightly so as to avoid light leakage, and then enter the heart rate detection. During the detection process, the wrist is required to remain stationary, and the dynamic heart rate value will be displayed after a few seconds. Enter the heart rate icon interface to measure the current heart rate value; Display the current value of the heart rate interface and the heart rate status of each period of the day; More detailed information analysis and data records can be viewed on the APP side;

Take exercise

• Click on the exercise interface to enter the exercise interface, which supports walking, running, riding, skipping, badminton, basketball, football, swimming, climbing, tennis, football, golf, yoga, fitness and dancing.
• More detailed information analysis and data records can be viewed on the mobile APP;

Blood pressure

• Before blood pressure monitoring, first make sure that the watch is properly worn on the wrist (the best position is one finger wide above the wrist bone). For blood pressure testing, it is required to wear it tightly to avoid light leakage, and then enter the blood pressure testing. During the testing process, the wrist is required to keep still and wait for the blood pressure value to be displayed.
• Enter the blood pressure icon interface to measure the current blood pressure value and the measured data of the last seven times; More detailed information analysis and data records can be viewed on the APP side;

Blood oxygen

• Before blood oxygen monitoring, first make sure that the watch is properly worn on the wrist (the best position is one finger wide above the wrist bone).
• Blood oxygen testing requires that the watch be worn tightly to avoid light leakage and cannot be effectively detected. Then, enter the blood oxygen testing. During the testing process, the wrist is required to keep stil and wait for the blood oxygen value to be displayed. Enter the blood oxygen icon interface to measure the current blood oxygen value;
• Display the current value of blood oxygen interface and the measurement data of the last seven times; More detailed information analysis and data records can be viewed on the APP side;

Weather

• The weather interface will display the current weather temperature and slide up to display the weather information of the next six days;
• The weather information needs to be connected to the APP to get data. If the connection is opened for a long time, the weather information will not be updated;

Camera

• After connecting the mobile APP, the watch can control the mobile phone camera to take pictures;
• After turning on the camera on the mobile phone, press and hold on the watch camera control page to trigger the camera shutter of the mobile phone;

Music control

• After connecting the mobile APP, the watch can control the music player of the mobile phone;
• When the mobile phone plays music, you can use the watch to control the mobile phone to play/pause the previous song, the next song and adjust the volume.

Alarm clock

• The alarm clock of the watch can be set on the APP side and the watch side, and up to 8 alarms can be set.
• After the set time arrives, the watch will display the alarm clock icon and vibrate;

Message push

• The watch can receive and display the notification push and incoming call reminder on the mobile phone, and can refuse the call. The push option switch is set in the APP terminal.
• The watch message page can store the last 5 message records;

Other functions

• Other functions of the watch include:
• Breathing exercise, pressure detection, stopwatch, alarm clock, timer, do not disturb mode, power-saving mode, brightness, vibration, factory settings, restart, shutdown, APP download QR code, etc.

Sedentary reminder

• After connecting the APP, turn on the sedentary reminder;
• After sitting for 1 hour, the watch will prompt you to get up and walk;

Frequently asked questions and answers

Why can’t you wear a watch to take a hot bath?

• When bathing, the temperature is relatively high, which will produce a lot of water vapor;
• Why can’t the bracelet receive the message push

Android phone settings:

1. Confirm that the message push switch is turned on on the mobile APP;
2. Confirm that the message can be displayed normally on the notification bar of the mobile phone, and the watch message is pushed by obtaining the message of the notification bar of the mobile phone; If there is no message in the notification bar of the mobile phone, the watch will not be able to receive push; (You need to find the notification settings in the mobile phone settings, and turn on the notification switches of WeChat, QQ, phone, SMS and mobile client)
3. Open the watch’s accessibility settings. (Find the auxiliary function in the phone settings, and open the customer auxiliary function settings on the watch side)

Apple mobile phone set:

1. Confirm that the message push switch is turned on at the mobile client:
2. Confirm that the mobile phone message can be displayed normally in the notification bar;

(You need to find the notification settings in the mobile phone settings, and turn on the notification switches of WeChat, QQ, phone, SMS and mobile client)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>