THOMSON QYTM-D528 Computer Speakers User Manual
- June 5, 2024
- THOMSON
Table of Contents
COMPUTER SPEAKERS
User Manual
OYTM-D528
Specifications
Bluetooth version: V5.0
Bluetooth receiving distance: > 10m
Output power: (RMS) SWx 2
Speaker size: 2 “x 2
Frequency response: 60Hz-20KHz
Power supply. USB 5V/1A
Audio input: Bluetooth/AUX IN
Product Size: W397x078xH5Imm
Package Contents
Sueakes x Locs
User Manual x Ipes
Product Description
- Volume & mode adjustment
- Long press tor power an / off
- Short press once to switch the light mode
- Short press twice to switch Bluetooth / AUX
- Turn ta valume adjustment
- FX LED light effects
- 3.5mm jack Cable
- USB 5V Powered Jack
Bluetooth mode
- Long press the VOLUME knob to power on . The default mode is aux mode. Short press far two consecutive times to switch the Bluetooth / AUX mode, Then open the Bluetooth device of the mobile phone or computer, search the corresponding Bluetooth device and name it “D528” and then click Connect. After pairing and connecting, there will be a prompt tone, you can play music
- After connecting with mobile phone once, Bluetooth has memory function. After turning on the Bluetesth of mobile phone, it can connect automatically or manually according to different types of mobile phones. If it needs to be disconnected, the Bluetooth settings can be disconnected through the mobile phone.
- Insert AUX in and press VOLUME knob twice to switch to AUX mode.
Note: If the audio cable is connected to the computer or the mobile phone has
current noise, please turn the audio cable head to adjust until there is no
current noise.
This product has been manufactured and sald under the responsibility of
MAXTALENT INDUSTRIAL Limited,
Thomson and the Thomson logo are trademarks used under license by MAXTALENT
INDUSTRIAL Limited.
Further information at www.maxtdigital.com/THOMSON.
Any other product, service, company, trade or product name and logo referenced
herein are the property of their respective owners.
Manufacture: Shenzhen Qiuyu Electronic Co..Ltd
Website: www.maxtdigital.com/THOMSON
Support: service@maxtdigital.com
Made in China
V1.0
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
8 digital device. pursuant to part 15 of the FCC Rules. These limits are
designed ta provide reasonable protection against harmful interference in a
residential installation, This equipment generates, uses, and can radiate
radio frequency energy and. if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment into an cutlet an a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician far help.
Caution. Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation.
RF Exposure Information
Ths equipment compliss with tha FCC RF radiation exposure limited set forth
for an uncontrolled environment.
Tha equipment should be installed and operated with a minimum distance of 20cm
between the radiator and ary part of your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>