Gude 75140 Professional Ratchet Wrench Instructions
- June 5, 2024
- Gude
Table of Contents
Gude 75140 Professional Ratchet Wrench
Please read carefully these Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even in abbreviated version, are subject to approval. Technical changes reserved.
Do you have any questions? Any claim? Do you need spare parts or operating
instructions?
We will quickly help you and without bureaucracy at our homepage www.guede.com
in the Servicing part. Please help us be able to help you. In order to
identify your device in case of claim we need the serial No., assortment item
No. and year of production. All this data can be found on the type label.
Please enter it here for future reference.
Serial No.__Product
No.Year of production:___
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Symbols: product safety, commands
Ratchet screwdriver 1/2″ PRO
Hardy, chromium plated, polished finish. Extremely high torque (110 Nm), owing
to which additional tightening is not necessary. Softgripp heated handgrip.
Tool bracket of high quality. Low vibrations, long-life gearing right/left
from the gear on the head. Air outlet on pneumatic coupling to provide for
nice work. Continuous adjustment of speed.
It includes a connecting plug of a usual nominal width 7,2.
- Handle
- Pneumatic coupling
- Control lever
- Tool hold
coupling is formed by fast-acting clutch.
Safety Provisions
Protect yourself and those around against accidents with suitable safety means.
- Do not touch the rotating parts.
- The ratchet screwdriver should not be used in contrary to determination.
- Protect the pneumatic tools from children.
- Get down to work well-rested and concentrated.
- Pneumatic connection via a fast-acting clutch only.
- Set-up the work pressure on reduction valve.
- Do not use oxygen or inflammable gases as the source of energy.
- Before removing failures, disconnect the unit from the source of pressure air.
- Use only the genuine spare parts.
- Never let the unit idle at full.
- When working with a ratchet screwdriver, always wear required protection suits and ear protectors.
Technical Data
- Operating pressure: 6,3 bar
- Air consumption: 180-540 l/min
- Air connection crew thread: 1/4″
- Max. torque: 110 Nm
- Speed 160 min-1
- Recommended hose Cross-section : 10 mm
- Weight: 1,4 kg
Initial Operation
Screw the plug-in clutch included in the delivery (pos. 2) screw in the
reduction clutch. Use a box-end or a forked wrench for it.
Notice: Tighten the thread with a Teflon tape.
Pull a required socket wrench insert on the drive (pos.4). Connect the air
hose and a fast-acting clutch to the plug-in clutch. Put the socket wrench
insert on the screw or the nut being released/tightened. Set-up the required
direction of turning on the switching lever (Fig.2) and pull the draw-off
lever (pos. 3).The required speed and torque may be set
up with a screw on the hand grip (Fig. 3).
Maintenance and Care
Observing warning commands shown in the manual will provide this high quality product long service life and fault-free operation. Lasting and trouble-free function of your ratchet screwdriver is grounded on regular lubrication. Use only a special tool oil. Pick up a possibility of lubrication. :
Via a beam added lubricator
The full maintenance unit include a beam added lubricator and is placed on the
compressor.
Via a lubricator on the piping
A lubricator installed on piping supplying the unit with sufficient amount of
oil in an immediate distance from the unit (approximately 50 cm).
manually
If there is no maintenance unit or a lubricator on piping , 5-6 drops of
oil should be put in pneumatic connection before every putting in operation.
Store the pneumatic tool in dry rooms only.
EC Declaration of Conformity
We, Güde GmbH & Co. KG Birkichstraße 6, 74549 Wolpertshausen, Germany, hereby
confirm the following appliances correspond – on a basis of their conception
and their construction type and in designs launched by us – to appropriate
basic requirements of directives of the European Community concerning
occupational health and safety.
In case of any change to appliances not approved by us the Declaration
expires.
Marking of appliances: Ratchet screwdriver 1/2″ PRO
Order No.: 75140
Date/producer signature: 03.01.2012
Respective EU standards:
2006/42/EC
Harmonised standards used:
EN 792-6+A1:2008
Guarantee
Guarantee claims according to the guarantee certificate attached. Please, understand that we are unable to accept the guarantee for the following reasons:
-
Breach of operation and service instructions .
Necessary cleaning neglect. -
Forcible use, unprofessional handing, misuse or accident.
-
Laic interventions or unprofessional attempts to do a repair.
General Safety Directions
Read the operation manual carefully. Get familiar with the adjustment and
correct use of the unit
Assigned Use
The adjustment screwdriver is a pneumatic tool to do craft works easily. It
works very well on motor vehicles, motorcycles, agricultural machines or
assembly belts, primarily on hardly accessible places. To obtain a maximum
torque, additional fastening by hand with ratchet screwdriver is not
permitted. Waste air comes out in the forward part of the body. Pneumatic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>