jura WE8 Commercial Coffee Machine Instruction Manual

: June 5, 2024
: Jura

jura WE8 Commercial Coffee Machine

Control elements

Filler funnel cover
Filler funnel for ground coffee
Bean container with aroma preservation cover
Water tank cover
Water tank
Plug-in mains cable (back of the machine)
Coffee grounds container
Drip tray
Cover cap for grinder adjustment switch
Grinder adjustment switch
On/Off button
Fine foam frother
Height-adjustable coffee spout
Cup grille

Operating Instructions – Jura WE8

Cappuccino

Place your cup under the spout on the right. Adjust the spout height to suit your cup.
Turn the milk selector to the foam milk position – See Fig 1.
Select cappuccino. Your cappuccino will now be poured.

Flat white

Place your cup under the spout on the right. Adjust the spout height to suit your cup.
Turn the milk selector to the flat milk position – See Fig 2.
Select flat white. Your flat white will now be poured

Café Latte

Place your cup under the spout on the right. Adjust the spout height to suit your cup.
Turn the milk selector to the foam milk position – See Fig 1.
Select café latte (Latte macchiato). Your Café latte will now start pouring.
When your cup is 1/3 full of milk turn to the flat milk position – See Fig 2.

Espresso or Long Black

Place your cup under the middle spouts and select espresso or coffee. Yourdrink will now be poured. Press the button twice for a double espresso or two coffees.

Notes:

Each key is fully programmed however you can stop the milk and coffee flow short by pressing cancel. Adjustments can be made to coffee strength, milk and water quantity to suit personal preference using the arrow keys. These changes do not affect the programmed settings.
Milk temperature can be increased by turning the dial clockwise through the flat and foam sections – Max temperature for foam milk is at 12 o’clock and max temperature for flat milk is at 3 o’clock.

Cleaning Products – WE8

Daily
See procedure – Daily milk system clean
Must be performed at the end of each day just before the machine is turned off
Purpose: To ensure the milk system is clean overnight so milk does not go off blocking the pathways

Use Cafetto daily milk cleaner 1 litre bottle (Prod no. 71144) or Jura Milk System Cleaner Mini Tabs 180g (Prod no. 71150)

Weekly

See procedure – Weekly milk system clean

Performed once per week
Purpose: To remove any build up of milk fats to ensure the milk frother works correctly

Use Cafetto weekly milk cleaner – 1 litre bottle (Prod no. 71145)

When prompted

See procedure – Coffee system clean
Performed only when prompted (Every 200 coffees)
Purpose: Removes coffee oil from the brewing unit and coffee path to maintain the quality of the coffee

Use Jura cleaning tablets
– 6 pk (Prod no. 71111)
– 25 pk (Prod no. 71112)

See procedures – Changing the filter or Descaling the machine

Perform a filter change or descale only when prompted.
Purpose: Protects against lime scale build up inside the machine maintaining water & steam paths

Std – Prod no.71137

9 pk – Prod no. 71121
36 pk – Prod no. 71122

Daily milk system clean

Approximate duration 20 min.

3-Phase cleaning tablets
Prod no. 71112 25pcs
Prod no. 71111 6pcs

⚠ These short instructions do not replace the ‘WE8 Instructions for Use’. Make sure you read and observe the safetyinformation and warnings first in order to avoid hazards.

Precondition:

Weekly milk system clean

Complete this procedure once a week after the daily milk system clean.

Remove the automatic milk frother from the machine. (Fig 1 – 2)
Separate the automatic milk frother into 5 parts. (Fig 3)
Soak plastic / rubber parts in 250ml of warm water & 15ml of Cafetto red weekly solution for 20 min.
Remove the parts from the solution and rinse them under cold tap water.
Re-assemble the auto frother and refit onto the machine.
Important: Do not soak metal / chrome parts to avoid possible damage.

Important: Do not soak metal / chrome parts to avoid possible damage.

Coffee system clean

Approximate duration 20 min.

3-Phase cleaning tablets
Prod no. 71112 25pcs
Prod no. 71111 6pcs

⚠ These short instructions do not replace the ‘WE8 Instructions for Use’. Make sure you read and observe the safetyinformation and warnings first in order to avoid hazards.

Precondition:

Changing the filter

Filter cartridge CLARIS Pro Smart Prod no. 71137

⚠ These short instructions do not replace the ‘WE8 Instructions for Use’. Make sure you read and observe the safetyinformation and warnings first in order to avoid hazards.

Precondition:

Descaling the machine

Approximate duration 40 min.

Descaling tablets
Prod no. 71122 36pcs

⚠ These short instructions do not replace the ‘WE8 Instructions for Use’. Make sure you read and observe the safetyinformation and warnings first in order to avoid hazards.

Precondition:

Troubleshooting

Milk flow

No milk flow
Milk spluttering
Not filling cups
Froth milk is flat & cool

Solution:

Remove the air suction. (Fig 1)
Check the valve on the tip of the air suction is clean and is able to open and close freely. Squeeze the valve between your figures, it should open, release it and it should close. (Fig 2)
Refit the air suction. Turn the milk selector to the froth position (Fig 3), and test the milk. If the problem isstill occurring replace the air suction and test again. If the problem has been solved, order in a spare air suction (Part no. 71866) otherwise go to step 4.
Remove the auto frother from the machine. (Fig 4)
Separate the auto frother into 5 parts. (Fig 5)
Soak plastic / rubber parts only in 250ml of warm water and 15 ml of Cafetto red weekly cleaner for 30 min.
Rinse parts under water. Clean the milk and air paths with the cleaning brush (Part no. 71161) (Fig 6 – 9)
Re-assemble the auto frother and refit onto the machine.
Test the milk. If the problem has not been solved contact customer support on 1300 365 487.

Important: Do not soak metal / chrome parts to avoid possible damage.

Welcome to My Coffee Shop!

Our hours of operation are Monday – Friday 9am to 5pm. Or you can visit us at your convenience on the web at www.mycoffeeshop.com.au. Orders and service requests can be placed by:

Phone: 1300 365 487
Fax: 02 9692 8046
E-mail: clientservices@mycoffeeshop.com.au
Online: www.mycoffeeshop.com.au/shop- online
Remittances: accountsreceiveable@mycoffeeshop.com.au
Service enquiries: servicecentre@mycoffeeshop.com.au

Next business day delivery via courier to:
Adelaide Canberra Melbourne Sydney
for product orders placed by 1.30pm
Please note you will be advised when ordering if delivery charges apply to your order

Once again, welcome to My Coffee Shop and remember we are here to help. If you have any questions please don’t hesitate to contact us.

We look forward to exceeding your expectations and making your day easier and more enjoyable.

Kind regards,

My Coffee Shop
Client Services
My Coffee Shop Pty Ltd

My Coffee Shop Pty Ltd
ACN 102 850 037

390 Johnston St
Abbotsford VIC 3067
ph: 03 9946 4160 fax:

97 / 1-5 Harwood St
Pyrmont NSW 2009
ph: 02 9034 6580